RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 13,63 0,54 LED 1 8 PCB EDGE LP 3,05 ±0,50 0,12 ±0,02 1 14,72 0,58 0,38 ±0,10 0,01 ±0,00 MAX 21,59 0,85 15,88 0,63 LED 2 16,66 0,66 11,43 ±0,13 0,45 ±0,01 10,89 0,43 203290 XXXX RC NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R). NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5). MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK NO. LED 2 LEFT LED 1 RIGHT LED IDENT. NR. LED 2 LINKS LED 1 RECHTS CODE GREEN GREEN L3 SHIELDING: Cu ALLOY, PLATED WITH Ni 203290 CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni Tolerances Information: TERMINAL FINISH: SOLDER SCHEMATIC NUMBER: H3D01 LED LENS: EPOXY Scale 2:1 All Dimensions in mm [in] OPERATING TEMPERATURE: -40°C TO 85°C Consider protection memo from DIN 34 Designation All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. B 15.01.2008 Index Date Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x1, INT. MAG., LED ALIGNED 133883 www.ERNI.com Class MAXMJ I (1/2) A3 ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D01 EXTENDED TERMPERATURE RANGE ELEKTRISCHER SCHALTPLAN PCB CABLE P1 CT P4 P2 J1 P3 CT P5 P6 J3 J2 J6 N/C P7 J4,5 J7,8 GND P8 4X 75 Ω 1000pF/2KV RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTÜCKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 1,27 0,05 0,64 0,03 2,54 0,10 1,0 7 ±0,0 0 ,0 2± 7 ±0,0 0,13 0,0 0 ,0 4± 0 0 8,89 0,35 0,0 X2 1 X2 X4 11 12 9 10 2,54 0,10 3,25 0,07 0 6 ±0,0 3,05 0,12 1,60 ± ±0,07 8 8 0 X 4,06 0,16 0,89 ±0,0 0,04 8,18 0,32 11,43 0,45 13,26 0,52 15,49 0,61 MAGNETICS SPECIFICATIONS @ 25°C AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2:J1-J2) 1CT : 1 ±3% (P3-P6:J3-J6) 1CT : 1 ±3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2:P3-P6) 350 µH MIN DCR (P1-P2:P3-P6) 1.1 OHMS MAX INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX RETURN LOSS: 0.5-30 MHz -18 dB MIN 40 MHz -15.5 dB MIN 50 MHz -13.6 dB MIN 60-80 MHz -12 dB MIN CROSSTALK: 0.1-100 MHz -40 dB TYP CMR: 0.1 - 30 MHz -50 dB TYP 30 - 60 MHz -40 dB TYP 60 - 100 MHz -35 dB TYP ISOLATION 1,500 Vrms LED SPECIFICATIONS LED ANWEISUNG Information: SCHEMATIC NUMBER: H3D01 COLOR Vf Vf If CIRCUIT DIAGRAM FARBE TYP MAX mA SCHALTPLAN GREEN 2.2 2.5 20 Tolerances Scale 9 10 11 12 2:1 All Dimensions in mm [in] Consider protection memo from DIN 34 Designation All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x1, INT. MAG., LED ALIGNED 133883 www.ERNI.com Class MAXMJ I (2/2) A3