Bulletin PD -2.334 rev. B 01/02 HFA15TB60 HFA15TB60-1 HEXFRED Ultrafast, Soft Recovery Diode TM Features • • • • • VR = 600V Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions VF = 1.7V Qrr * = 84nC di(rec)M/dt * = 188A/µs * 125°C Benefits • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count Description International Rectifier's HFA15TB60 is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps per Leg continuous current, the HFA15TB60 is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA15TB60 is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. TO-220AC TO-262 Absolute Maximum Ratings Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG www.irf.com Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max Units 600 15 150 60 74 29 V - 55 to +150 C A W 1 HFA15TB60, HFA15TB60-1 Bulletin PD-2.334 rev. B 01/02 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter Min Typ Max Units V BR Cathode Anode Breakdown Voltage 600 V VFM Max Forward Voltage IRM Max Reverse Leakage Current CT Junction Capacitance 1.3 1.7 1.5 2.0 1.2 1.6 1.0 10 400 1000 25 50 LS Series Inductance 8.0 V µA pF nH Test Conditions IR = 100µA IF = 15A See Fig. 1 IF = 30A IF = 15A, TJ = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated VR = 200V See Fig. 3 Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameter t rr Reverse Recovery Time trr1 See Fig. 5, 6 & 16 trr2 IRRM1 Peak Recovery Current See Fig. 7& 8 IRRM2 Qrr1 Reverse Recovery Charge See Fig. 9 & 10 Qrr2 di(rec)M/dt1 Peak Rate of Fall of Recovery Current See Fig. 11 & 12 di(rec)M/dt2 During tb Min Typ Max Units 19 42 74 4.0 6.5 84 241 188 160 60 120 6.0 10 180 600 ns A nC A/µs Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V TJ = 25°C TJ = 125°C IF = 15A TJ = 25°C TJ = 125°C VR = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Parameter Tlead ! RthJC RthJA " RthCS # Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Wt Weight T Mounting Torque Min Typ Max Units 300 1.7 80 °C K/W 12 10 g (oz) Kg-cm lbf•in 0.5 2.0 0.07 6.0 5.0 !$ 0.063 in. from Case (1.6mm) for 10 sec " Typical Socket Mount # Mounting Surface, Flat, Smooth and Greased 2 www.irf.com HFA15TB60, HFA15TB60-1 Bulletin PD-2.334 rev. B 01/02 Reverse Current - IR (µA) 10000 T J = 150°C 100 TJ = 125°C 10 1 0.1 TJ = 25°C T J = 125°C 10 TJ = 150°C 1000 A 0.01 0 T = 25°C J 200 400 600 Reverse Voltage - V R (V) Fig. 2 - Typical Reverse Current vs. Reverse Voltage 100 A 1 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current A Junction Capacitance -CT (pF) Instantaneous Forward Current - IF (A) 100 TJ = 25°C A 10 10 100 1000 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 0.1 0.01 0.00001 PDM 0.05 t1 0.02 0.01 t2 SINGLE PULSE (THERMAL RESPONSE) 0.0001 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics www.irf.com 3 HFA15TB60, HFA15TB60-1 Bulletin PD-2.334 rev. B 01/02 25 100 VR = 200V TJ = 125°C TJ = 25°C I F = 30A I F = 15A 80 20 I F = 5.0A I F = 30A trr- (nC) Irr- ( A) 60 40 I F = 15A 15 I F = 5.0A 10 20 5 VR = 200V TJ = 125°C TJ = 25°C 0 100 A di f /dt - (A/µs) 800 600 di f /dt - (A/µs) 1000 Fig. 6 - Typical Recovery Current vs. dif/dt Fig. 5 - Typical Reverse Recovery vs. dif/dt 700 A 0 100 1000 10000 VR = 200V TJ = 125°C TJ = 25°C VR = 200V TJ = 125°C TJ = 25°C I F = 30A I F = 15A I F = 5.0A di (rec) M/dt- (A /µs) Qrr- (nC) 500 400 300 I F = 30A I F = 15A 1000 IF = 5.0A 200 100 0 100 A di f /dt - (A/µs) Fig. 7 - Typical Stored Charge vs. dif/dt 4 1000 100 100 A di f /dt - (A/µs) 1000 Fig. 8 - Typical di(rec)M/dt vs. dif/dt www.irf.com HFA15TB60, HFA15TB60-1 Bulletin PD-2.334 rev. B 01/02 3 t rr IF 0 REVERSE RECOVERY CIRCUIT tb ta Q rr VR = 200V 2 I RRM 4 0.5 I RRM di(rec)M/dt 0.01 Ω L = 70µH 1 D.U.T. dif/dt ADJUST di f /dt 1. dif/dt - Rate of change of current through zero crossing D IRFP250 G 5 0.75 I RRM 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current S 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Fig. 9 - Reverse Recovery Parameter Test Circuit Outline Table 10.54 (0.41) MAX. 1.32 (0.05) 3.78 (0.15) 3.54 (0.14) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 1.22 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) 2° Base Cathode 2 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 0.94 (0.04) 2.64 (0.10) 0.69 (0.03) 1 Cathode 1 4.57 (0.18) 3 3 Anode 0.61 (0.02) MAX. 4.32 (0.17) 5.08 (0.20) REF. Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and inches www.irf.com 5 HFA15TB60, HFA15TB60-1 Bulletin PD-2.334 rev. B 01/02 Outline Table Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode Conforms to JEDEC Outline TO-262 Dimensions in millimeters and inches Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/02 6 www.irf.com