ATMEL AT45DCB008D

Features
•
•
•
•
•
MultiMediaCard (MMC) Form Factor
Single 2.7V to 3.6V Supply
66 MHz Max Clock Frequency
Serial Peripheral Interface (SPI) Compatible
Low Power Dissipation
– 10 mA Active Read Current Typical
– 25 µA CMOS Standby Current Typical
• Industrial Temperature Range
• Pb-free/RoHS-compliant Package
1. Description
The AT45DCB008D, AT45DCB004D and AT45DCB002D are 2.7-volt only SPI compatible serial interface DataFlash® Cards. They are offered in 8-megabyte (64-Mbit),
4-megabyte (32-Mbit) and 2-megabyte (16-Mbit), densities. These 7-pin cards are
form factor compatible to the MultiMediaCard standard leveraging on a wide range of
low cost connectors that are commercially available. Additionally, the DataFlash Card
is pinout compatible to the SPI version of the MMC card.
The small form factor and simple interface make the DataFlash Card ideal for a wide
variety of data- and program code-storage applications where a removable storage
medium is required. Applications range from voice/audio, text or image storage to
software applications, system upgrades and software patches.
For detailed device specifications, please refer to the corresponding DataFlash
datasheets:
8-megabyte,
4-megabyte, and
2-megabyte
2.7-volt Only
DataFlash®
Cards
AT45DCB008D
AT45DCB004D
AT45DCB002D
• AT45DCB008D reference AT45DB642D
• AT45DCB004D reference AT45DB321D
• AT45DCB002D reference AT45DB161D
Table 1-1.
Pin Configuration
Pin #
Pin Name
Function
1
CS
Chip Select
2
SI
Serial Input
3
GND
Ground
4
VCC
Supply
5
SCK
Serial Clock
6
NC
No Connect
7
SO
Serial Output
Figure 1-1.
DataFlash Card - Top View
7 6 5 4 3 2 1
3607E–DFLASH–01/08
2. Ordering Information
ICC (mA)
fSCK
(MHz)
Active
Standby
Ordering Code
Package
Operation Range
66
15
0.05
AT45DCB008D
AT45DCB004D
AT45DCB002D
7DF1(1)
Industrial
(-40° C to 85° C)
Note:
1. The 7DF1 is a Pb-free/RoHS-compliant package.
Package Type
7DF1
2
7-lead, 2.5 mm Pitch 24 x 32 x 1.4 mm Body DataFlash Card
AT45DCB008D/004D/002D
3607E–DFLASH–01/08
AT45DCB008D/004D/002D
3. Packaging Information
3.1
7DF1 – DataFlash Card
E2
A
LABEL AREA
D
D1
3XR1.0
E1
SIDE VIEW
R0.25 ALL AROUND
E
TOP VIEW
COMMON DIMENSIONS
(Unit of Measure = mm)
E3
e
B
G
SYMBOL
MIN
NOM
MAX
A
1.30
1.40
1.50
B
2.40 TYP
C
1234567
D
C
4.00 TYP
31.90
D1
E
F
BOTTOM VIEW
NOTE
32.00
32.10
28.00 REF
23.90
24.00
E1
22.00 REF
E2
20.00 REF
E3
15.00 TYP
F
11.20 REF
G
8.13 TYP
e
2.50 TYP
24.10
11/10/05
R
2325 Orchard Parkway
San Jose, CA 95131
TITLE
7DF1, 7-pad, 2.5 mm Pitch 24 x 32 x 1.4 mm Body DataFlash Card
DRAWING NO.
7DF1
REV.
B
3
3607E–DFLASH–01/08
4. Revision History
4
Revision Level Revision Date
History
A – November 2005
Initial release
B – March 2006
Added text to indicate that DataFlash cards are Pb-free
C – April 2006
Added text to indicate that DataFlash cards are RoHS compliant
D – July 2007
Added AT45DCB001D part number.
E – January 2008
Removed AT45DCB001D part number.
AT45DCB008D/004D/002D
3607E–DFLASH–01/08
Headquarters
International
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Atmel Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Atmel Europe
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309
78054 Saint-Quentin-enYvelines Cedex
France
Tel: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Technical Support
[email protected]
Sales Contact
www.atmel.com/contacts
Product Contact
Web Site
www.atmel.com
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF
THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© 2008 Atmel Corporation. All rights reserved. Atmel®, logo and combinations thereof, DataFlash ® and others, are registered trademarks or
trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
3607E–DFLASH–01/08