36 360-002 Non-Environmental Backshell with Strain Relief Low Profile - Direct Coupling 360 F S 002 M 16 10 M 6 CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S Connector Designator Strain Relief Style (H, A, M, F) Angle and Profile A = 90° B = 45° S = Straight * Conn. Desig. B See Note 5 DIRECT COUPLING Cable Entry (Tables X, XI, XII) Shell Size (Table I) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) STYLE 2 (STRAIGHT - See Note 1) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series Basic Part No. Finish (Table II) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) A Thread (Table I) B (Table I) (Table III) F* (Table IV) B (Table I) Glenair’s Non-Detent, SpringLoaded, Self-Locking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. STYLE A Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. B (Table I) * For Style F light duty strain relief use F1 and H1 dimensions in Table V. Now Available with the “NESTOR” STYLE H Heavy Duty (Table X) V G (Table IV) J J E (Table III) (Table IV) Cable Range STYLE M Medium Duty (Table XI) STYLE F Light Duty (Table XII) X Y CAGE Code 06324 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (straight only.) 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on H* straight backshells. (Table 5. When using IV) Connector Designator B refer to pages 18 and 19 for part number development. Z Cable Range Y .416 (10.5) Max Cable Range Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 36 - Page 4 36 360-002 Non-Environmental Backshell with Strain Relief Low Profile - Direct Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY T V Cable Range Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 04 .567 (14.4) 1.187 (30.1) .636 (16.2) 06 .630 (16.0) 1.250 (31.8) .710 (18.0) 08 .692 (17.6) 1.312 (33.3) .731 (18.6) 10 .755 (19.2) 1.655 (42.0) .825 (21.0) 12 .848 (21.5) 1.765 (44.8) .988 (25.1) 16 1.036 (26.3) 1.952 (49.6) 1.087 (27.6) 20 1.130 (28.7) 2.098 (53.3) 1.325 (33.7) 24 1.255 (31.9) 2.155 (54.7) 1.337 (34.0) 28 1.317 (33.5) 2.250 (57.2) 1.827 (46.4) 32 1.348 (34.2) 2.343 (59.5) 2.027 (51.5) TABLE XII: CABLE ENTRY Cable Range Dash Z No. Max Min Max 02 .968 (24.6) .125 (3.2) .250 (6.4) 03 1.046 (26.6) .250 (6.4) .375 (9.5) 04 1.156 (29.4) .312 (7.9) .500 (12.7) 05 1.218 (30.9) .437 (11.1) .625 (15.9) 06 1.343 (34.1) .562 (14.3) .750 (19.1) 07 1.468 (37.3) .687 (17.4) .875 (22.2) 08 1.593 (40.5) .812 (20.6) 1.000 (25.4) 10 1.843 (46.8) 1.062 (27.0) 1.250 (31.8) TABLE XI: CABLE ENTRY Dash W X Y Cable Range No. Max Max Max Min Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. © 2005 Glenair, Inc. CAGE Code 06324 H Max 1.200 (30.5) 1.320 (33.5) 1.340 (34.0) 1.660 (42.2) 1.750 (44.5) 2.033 (51.6) 2.033 (51.6) 2.200 (55.9) 2.450 (62.2) 2.450 (62.2) TABLE V: ELBOW Elbow F1 Size Max 04 1.550 (39.4) 06 1.610 (40.9) 08 1.670 (42.4) 10 1.760 (44.7) 12 1.870 (47.5) 16 2.060 (52.3) 20 2.210 (56.1) Elbow Size 04 06 08 10 12 16 20 H1 Max 1.560 (39.6) 1.680 (42.7) 1.700 (43.2) 1.770 (45.0) 1.860 (47.2) 2.030 (51.6) 2.140 (54.4) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 36 - Page 5