39 390-012 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Direct Coupling - Low Profile 390 F S 012 M 16 05 L 6 CONNECTOR DESIGNATORS * Product Series A-B -C-D-E-F G-H-J-K-L-S Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator Strain Relief Style (L, G) Angle and Profile A = 90 B = 45 S = Straight * Conn. Desig. B See Note 5 DIRECT COUPLING Cable Entry (Table V) Shell Size (Table I) Basic Part No. TYPE C OVERALL SHIELD TERMINATION Finish (Table II) * Length Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) .312 (7.9) Max O-Rings A (Table I) * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) B (Table I) STYLE 2 (STRAIGHT See Note 1) J G J E (Table III) (Table IV) (Table III) (Table IV) F (Table IV) H (Table IV) STYLE L Light Duty (Table V) STYLE G Light Duty (Table V) .850 (21.6) Max Cable Range © 2005 Glenair, Inc. .072 (1.8) Max Cable Range K CAGE Code 06324 L Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 42 39 390-012 Splash-Proof EMI/RFI Cable Sealing Backshell Light-Duty with Strain Relief Type C - Direct Coupling - Low Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Elbow Size 01 02 03 04 05 06 07 08 09 10 Dash No. 01 02 03 04 05 06 07 08 09 10 © 2005 Glenair, Inc. E Max .457 (11.6) .457 (11.6) .630 (16.0) .692 (17.6) .755 (19.2) .848 (21.5) 1.036 (26.3) 1.130 (28.7) 1.130 (28.7) 1.130 (28.7) K Max .781 (19.8) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE IV: CABLE ENTRY F G Max Max 1.700 (43.2) .636 (16.2) 1.700 (43.2) .636 (16.2) 1.748 (44.4) .709 (18.0) 1.808 (45.9) .734 (18.6) 1.898 (48.2) .825 (21.0) 1.998 (50.7) .990 (25.1) 2.198 (55.8) 1.090 (27.7) 2.338 (59.4) 1.325 (33.7) 2.338 (59.4) 1.325 (33.7) 2.338 (59.4) 1.325 (33.7) TABLE V: CABLE ENTRY Cable L Min Max .062 (1.6) .593 (15.1) .125 (3.2) .718 (18.2) .250 (6.4) .843 (21.4) .375 (9.5) .968 (24.6) .500 (12.7) 1.109 (28.2) .625 (15.9) 1.218 (30.9) .750 (19.1) 1.343 (34.1) .875 (22.2) 1.468 (37.3) 1.593 (40.5) 1.000 (25.4) 1.718 (43.6) 1.125 (28.6) CAGE Code 06324 H Max 1.698 (43.1) 1.698 (43.1) 1.818 (46.2) 1.838 (46.7) 1.908 (48.5) 1.998 (50.7) 2.168 (55.1) 2.278 (57.9) 2.278 (57.9) 2.278 (57.9) Range Max .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 43