400-001
TAG Ring Backshell
40
®
with Strain Relief
Rotatable Coupling - Low Profile
400 F S 001 M 16 06 L 6
CONNECTOR
DESIGNATORS
Length: S only
(1/2 inch increments:
e.g. 6 = 3 inches)
Product Series
A-F-H-L-S
Connector
Designator
Strain Relief Style (F, G, L)
ROTATABLE
COUPLING
Angle and Profile
A = 90
B = 45
S = Straight
Cable Entry (Table IV, V)
Shell Size (Table I)
Finish (Table II)
Basic Part No.
Length *
A Thread
(Table I)
Length ± .060 (1.52)
Minimum Order Length 1.5 Inch
(See Note 4)
Ground
Spring
* Length
± .060 (1.52)
Minimum Order
Length 1.0 Inch
(See Note 4)
C Typ.
(Table I)
Shown with Style G Nut
Add “-445” to Specify Glenair’s Non-Detent,
("NESTOR") Spring-Loaded, Self-Locking Coupling.
See Page 41 for Details.
STYLE 2
(STRAIGHT
See Note 1)
E
G
(Table III)
.88 (22.4)
Max
(Table III)
F (Table III)
H (Table III)
STYLE 2
(45° & 90°
See Note 1)
Shown with Style L
Strain Relief
STYLE F
Light Duty
(Table V)
.416 (10.5)
Approx.
Cable
Range
© 2005 Glenair, Inc.
L
STYLE G
Light Duty
(Table IV)
STYLE L
Light Duty
(Table V)
.072 (1.8)
Approx.
Cable
Entry
K
CAGE Code 06324
.850 (21.6)
Approx.
Cable
Range
L
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
Series 40 - Page 4
400-001
TAG Ring Backshell
40
®
with Strain Relief
Rotatable Coupling - Low Profile
See inside back cover
fold-out or pages 13 and
14 for Tables I and II.
TABLE III: ELBOW DIMENSIONS
Shell Size
Conn. Desig.
H
A-F-L-S
09
08
11
10
13
12
15
14
17
16
19
18
21
20
23
22
25
24
28
32
36
Dash
No.
02
03
04
05
06
07
08
09
10
E
Max
.457 (11.6)
.520 (13.2)
.582 (14.8)
.645 (16.4)
.738 (18.7)
.926 (23.5)
.926 (23.5)
1.020 (25.9)
1.020 (25.9)
1.145 (29.1)
1.207 (30.7)
1.238 (31.4)
TABLE IV: CABLE ENTRY
K
Cable Entry
Max
Max
.545 (13.8)
.250 (6.4)
.670 (17.0)
.375 (9.5)
.795 (20.2)
.500 (12.7)
.920 (23.4)
.625 (15.9)
1.045 (26.5)
.750 (19.1)
1.170 (29.7)
.875 (22.2)
1.295 (32.9)
1.000 (25.4)
1.420 (36.1)
1.125 (28.6)
1.670 (42.4)
1.250 (31.8)
F
Max
1.660 (42.2)
1.720 (43.7)
1.780 (45.2)
1.870 (47.5)
1.980 (50.3)
2.170 (55.1)
2.170 (55.1)
2.320 (58.9)
2.320 (58.9)
2.370 (60.2)
2.470 (62.7)
2.560 (65.0)
Dash
No.
02
03
04
05
06
07
08
09
10
G
Max
.500 (12.7)
.595 (15.1)
.610 (15.5)
.700 (17.8)
.885 (22.5)
.975 (24.8)
.975 (24.8)
1.125 (28.6)
1.125 (28.6)
1.225 (31.1)
1.575 (40.0)
1.775 (45.1)
H
Max
1.670 (42.4)
1.790 (45.5)
1.810 (46.0)
1.880 (47.8)
1.970 (50.0)
2.140 (54.4)
2.140 (54.4)
2.250 (57.2)
2.250 (57.2)
2.420 (61.5)
2.670 (67.8)
2.670 (67.8)
TABLE V: CABLE ENTRY
Cable
L
Min
Max
.125 (3.2)
.968 (24.6)
.250 (6.4)
1.046 (26.6)
.250 (6.4)
1.156 (29.4)
.375 (9.5)
1.218 (30.9)
.500 (12.7)
1.343 (34.1)
.625 (15.9)
1.468 (37.3)
.625 (15.9)
1.593 (40.5)
.750 (19.1)
1.718 (43.6)
.875 (22.2)
1.843 (46.8)
Range
Max
.250 (6.4)
.375 (9.5)
.500 (12.7)
.625 (15.9)
.750 (19.1)
.875 (22.2)
1.000 (25.4)
1.125 (28.6)
1.250 (31.8)
1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied.
Dimensions E, F, G and H will not apply. Please consult factory.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable range is defined as the accommodations range for the wire bundle or cable.
Dimensions shown are not intended for inspection criteria.
4. Consult factory for shorter lengths on straight backshells.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
Series 40 - Page 5