463 463-001 EMI/RFI Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Low Profile 463 F S 001 M 16 05 F 6 CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series Connector Designator Strain Relief Style (F, G) Angle and Profile A = 90 B = 45 S = Straight Cable Entry (Table IV) Shell Size (Table I) Finish (Table II) Basic Part No. Length ± .060 (1.52) Minimum Order Length 2.0 Inch (See Note 5) Length * A Thread (Table I) 1.22 (31.0) Max C Typ. (Table I) Cable Range * Length ± .060 (1.52) Minimum Order Length 1.5 Inch (See Note 5) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max E (Table III) M (Table IV) Shown with Style F Strain Relief G (Table III) F (Table III) STYLE 2 (45° & 90° See Note 1) H (Table III) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) Shown with Style F Strain Relief © 2005 Glenair, Inc. CAGE Code 06324 Shown with Style G Strain Relief N (Table IV) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 463 - Page 2 463 463-001 EMI/RFI Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 Dash No. 01 02 03 04 05 06 07 08 09 10 11* 12* 13* 14* E Max .413 (10.5) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) M Max .843 (21.4) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) 2.187 (55.5) 2.312 (58.7) 2.437 (61.9) 2.546 (64.7) F Max 1.720 (43.7) 1.720 (43.7) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) 2.170 (55.1) 2.170 (55.1) 2.320 (58.9) 2.320 (58.9) 2.370 (60.2) 2.470 (62.7) 2.560 (65.0) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) TABLE IV: CABLE ENTRY Cable N Min Max .625 (15.9) .125 (3.2) .750 (19.1) .156 (4.0) .875 (22.2) .250 (6.4) 1.000 (25.4) .280 (7.1) 1.125 (28.6) .375 (9.5) 1.250 (31.8) .500 (12.7) 1.375 (34.9) .625 (15.9) 1.500 (38.1) .750 (19.1) 1.625 (41.3) .875 (22.2) 1.750 (44.5) 1.000 (25.4) 1.875 (47.6) 1.125 (28.6) 2.000 (50.8) 1.250 (31.8) 2.125 (54.0) 1.375 (34.9) 2.250 (57.2) 1.500 (38.1) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.420 (61.5) 2.670 (67.8) 2.670 (67.8) Range Max .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) * Consult factory for availability 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. O-Ring not supplied with Connector Designator A. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 463 - Page 3