39 390-013 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Standard Profile CONNECTOR DESIGNATOR 390 G S 013 M 17 10 H 6 Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series G Connector Designator ROTATABLE COUPLING Strain Relief Style (H, A, M, D) Angle and Profile H = 45° J = 90° S = Straight TYPE A OVERALL SHIELD TERMINATION Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) Basic Part No. Length ± .060 (1.52) Min. Order Length 2.5 Inch (See Note 4) Length * O-Ring A Thread (Table I) * Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) C Typ. (Table I) E (Table III) STYLE 2 (STRAIGHT See Note 1) 1.125 (28.6) Approx. G (Table III) F (Table III) Length ± .060 (1.52) 1.25 (31.8) Max H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range STYLE M Medium Duty (Table XI) X Y CAGE Code 06324 Cable Range STYLE D Medium Duty (Table XI) .135 (3.4) Max Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 14 www.glenair.com 39 390-013 SubmersibleEMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Standard Profile Shell Size 11 13 15 17 19 23 25 29 33 TABLE III: ELBOW DIMENSIONS E F G Max Max Max 1.240 (31.5) 2.060 (52.3) 1.380 (35.1) 2.080 (52.8) 1.440 (36.6) 1.260 (32.0) 2.360 (59.9) 1.290 (32.8) 1.500 (38.1) 1.310 (33.3) 2.380 (60.5) 1.570 (39.9) 1.340 (34.0) 2.500 (63.5) 1.630 (41.4) 1.380 (35.1) 2.540 (64.5) 1.730 (43.9) 2.570 (65.3) 1.800 (45.7) 1.410 (35.8) 2.800 (71.1) 2.040 (51.8) 1.580 (40.1) 1.620 (41.1) 2.820 (71.6) 2.130 (54.1) H Max 2.200 (55.9) 2.260 (57.4) 2.580 (65.5) 2.640 (67.1) 2.810 (71.4) 2.890 (73.4) 2.960 (75.2) 3.260 (82.8) 3.330 (84.6) TABLE X: CABLE ENTRY V Cable Range Dash T No. Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 04 .250 (6.4) .437 (11.1) 06 .780 (19.8) 1.145 (29.1) .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) 08 .350 (8.9) .625 (15.9) 10 .780 (19.8) 1.332 (33.8) 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 16 .875 (22.2) 1.250 (31.8) 20 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. TABLE XI: CABLE ENTRY Dash W Z Y X No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp. Cable Range Max Min ** .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.8) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) ** Not Applicable Style D Add “-445” to Specify Glenair’s Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 39 - Page 15 www.glenair.com