VISHAY M3900622-0557

M39006/22, M39006/25
www.vishay.com
Vishay
Wet Tantalum Capacitors, Military Established Reliability,
MIL-PRF-39006/22/25 Qualified Styles CLR79, CLR81
FEATURES
• Hermetically sealed
• Metal cased
• Axial lead
• Tubular
STYLE, MILITARY SPECIFICATION
• CLR79, M39006/22 MIL-PRF-39006/22
• CLR81, M39006/25 MIL-PRF-39006/25
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: M39006/22 - 1.7 μF to 1200 μF;
M39006/25 - 6.8 μF to 2200 μF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
Voltage Rating: 6 VDC to 125 VDC
Established Reliability Tantalum Capacitors to Military
Specification MIL-PRF-39006: In accordance with the
military specification MIL-PRF-39006 all capacitors are
marked with the military part number (M39006/xx-xxxx)
rather than the older style designation (CLR79, CLR81) and
should be ordered as such.
For information on the performance characteristics of these
capacitors, please refer to the latest issue of the Military
Specification. MIL-PRF-39006 establishes 1000 h failure
rate levels of 1 %, 0.1 %, and 0.01 %. When ordering these
parts, care must be exercised that the correct part number
expressing the appropriate failure level be specified.
Each order for military style capacitors requiring
government inspection must state whether inspection is to
be at the destination or at the Vishay plant. Orders requiring
source inspection cannot be shipped until this has been
accomplished.
ORDERING INFORMATION
M39006
/22
-0441
H
BASIC
DOCUMENT NUMBER
SLASH SHEET
DASH NUMBER
DESIGNATION OF HIGH
VIBRATION (OPTIONAL)
Indicates the basic
specification; in this case
MIL-PRF-39006
Indicates the specification
sheet of the basic
military specification
Taken from Standard/
Extended Ratings tables
H, optional, if specified
Revison: 28-Aug-12
Document Number: 40022
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
DIMENSIONS in inches [millimeters]
Tantalum feed-through
0.078 [1.98] max. dia.
Style CLR79
Style CLR81
Term. loc. within
0.031 [0.79] R
of true position
0.250 [6.35]
max.
Terminal
welded
to case
-
+
D dia.
0.094 [2.38]
max.
External
weld
E
L
E
Case
Circuit diagram
0.025 ± 0.002
[0.64 ± 0.05]
Glass
Insulating sleeve
BARE CASE
CASE CODE
T1
T2
T3
T4
WITH INSULATING SLEEVE
D
L
D (Max.)
L (Max.)
E
LEAD LENGTH
0.188 ± 0.016
[4.78 ± 0.41]
0.281 ± 0.016
[7.14 ± 0.41]
0.375 ± 0.016
[9.53 ± 0.41]
0.375 ± 0.016
[9.53 ± 0.41]
0.453 + 0.031/- 0.016
[11.51 + 0.79/- 0.41]
0.641 + 0.031/- 0.016
[16.28 + 0.79/- 0.41]
0.766 + 0.031/- 0.016
[19.46 + 0.79/- 0.41]
1.062 + 0.031/- 0.016
[26.97 + 0.79/- 0.41]
0.219
[5.56]
0.312
[7.92]
0.406
[10.31]
0.406
[10.31]
0.515
[13.08]
0.704
[17.88]
0.828
[21.03]
1.126
[28.60]
1.500 ± 0.250
[38.10 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
WEIGHT
(oz./g)
(Max.)
0.09
[2.6]
0.22
[6.2]
0.41
[11.6]
0.62
[17.7]
RATINGS AND CASE CODES - M39006/22
μF
1.7
2.5
3.5
3.6
4.0
4.7
5.0
6.8
8.0
8.2
9.0
10
11
14
15
18
20
22
25
30
33
39
40
43
47
50
56
60
68
70
82
6
8
10
15
25
30
50
60
75
100
125
T1
T1
T1
T1
T1
T1
T1
T1
T1
T1
T2
T1
T1
T2
T2
T1
T1
T2
T3
T1
T2
T1
T2
T1
T2
T3
T1
T3
T1
T2
T2
T2
T3
T3
T1
T2
T2
T3
T1
T3
T4
T3
T1
Revison: 28-Aug-12
T2
T3
T2
T3
Document Number: 40022
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
RATINGS AND CASE CODES - M39006/22
μF
86
100
110
120
140
150
160
170
180
220
250
270
290
300
330
350
390
430
540
560
750
850
1200
6
8
10
15
T2
25
30
T2
T3
50
60
75
100
T4
125
100
125
T1
T4
T2
T2
T3
T2
T4
T3
T4
T3
T2
T3
T2
T3
T2
T3
T3
T4
T3
T4
T3
T3
T4
T3
T4
T4
T4
RATINGS AND CASE CODES - M39006/25
μF
6.8
10
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
6
8
10
15
25
30
50
60
75
T1
T1
T1
T2
T1
T2
T3
T1
T1
T3
T2
T1
T4
T2
T2
T4
T1
T1
T1
T2
T2
T3
T4
T3
T4
T3
T4
T2
T2
T3
T4
T2
T2
T3
T3
T4
T3
T4
T3
T4
T3
T4
T4
Revison: 28-Aug-12
Document Number: 40022
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
STANDARD RATINGS/EXTENDED RATINGS: CLR79, M39006/22-XXXX
MAX. (2)
PART NO. M39006/22- (1)
MAX. CAPACITANCE
MAX.
MAX. DCL (μA)
MAX.
FAILURE RATE LEVEL
RIPPLE
CHANGE (%) AT
IMP.
AT
DF
CAP.
(%/1000 h)
CURRENT
CAPACITANCE CASE
AT
AT
TOL.
AT + 85 °C
(μF)
CODE
(± %)
M
P
R
+ 85 °C + 25 °C - 55 °C
40 kHz
+ 25 °C
- 55 °C + 85 °C + 125 °C
()
(%)
1.0
0.1
0.01
+ 125 °C
(mA)
30
30
30
68
68
68
140
140
140
270
270
270
330
330
330
560
560
560
1200
1200
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
0013
0014
0015
0016
0017
0018
0019
0020
25
25
25
56
56
56
120
120
120
220
220
220
290
290
290
430
430
430
850
850
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0021
0022
0023
0024
0025
0026
0027
0028
0029
0030
0031
0032
0033
0034
0035
0036
0037
0038
0039
0040
20
20
20
47
47
47
100
100
100
180
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
20
10
5
20
10
5
20
10
5
20
0041
0042
0043
0044
0045
0046
0047
0048
0049
0050
6 VDC AT + 85 °C; 4 VDC AT + 125 °C
0441
1.0
2.0
9
0442
1.0
2.0
9
0443
1.0
2.0
9
0444
1.0
2.0
15
0445
1.0
2.0
15
0446
1.0
2.0
15
0447
1.0
3.0
21
0448
1.0
3.0
21
0449
1.0
3.0
21
0450
1.0
6.5
45
0451
1.0
6.5
45
0452
1.0
6.5
45
0453
2.0
7.9
36
0454
2.0
7.9
36
0455
2.0
7.9
36
0456
2.0
13.0
55
0457
2.0
13.0
55
0458
2.0
13.0
55
0459
3.0
14.0
90
0460
3.0
14.0
90
8 VDC AT + 85 °C; 5 VDC AT + 125 °C
0241
0461
1.0
2.0
7.5
0242
0462
1.0
2.0
7.5
0243
0463
1.0
2.0
7.5
0244
0464
1.0
2.0
14
0245
0465
1.0
2.0
14
0246
0466
1.0
2.0
14
0247
0467
1.0
2.0
20
0248
0468
1.0
2.0
20
0249
0469
1.0
2.0
20
0250
0470
1.0
7.0
37
0251
0471
1.0
7.0
37
0252
0472
1.0
7.0
37
0253
0473
2.0
6.0
34
0254
0474
2.0
6.0
34
0255
0475
2.0
6.0
34
0256
0476
2.0
14.0
46
0257
0477
2.0
14.0
46
0258
0478
2.0
14.0
46
0259
0479
4.0
16.0
60
0260
0480
4.0
16.0
60
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
0261
0481
1.0
2.0
6
0262
0482
1.0
2.0
6
0263
0483
1.0
2.0
6
0264
0484
1.0
2.0
13
0265
0485
1.0
2.0
13
0266
0486
1.0
2.0
13
0267
0487
1.0
4.0
15
0268
0488
1.0
4.0
15
0269
0489
1.0
4.0
15
0270
0490
1.0
7.0
30
0221
0222
0223
0224
0225
0226
0227
0228
0229
0230
0231
0232
0233
0234
0235
0236
0237
0238
0239
0240
100
100
100
60
60
60
40
40
40
25
25
25
20
20
20
25
25
25
20
20
- 40
- 40
- 40
- 40
- 40
- 40
- 40
- 40
- 40
- 44
- 44
- 44
- 44
- 44
- 44
- 64
- 64
- 64
- 80
- 80
+ 10.5
+ 10.5
+ 10.5
+ 14
+ 14
+ 14
+ 14
+ 14
+ 14
+ 17.5
+ 17.5
+ 17.5
+ 14
+ 14
+ 14
+ 17.5
+ 17.5
+ 17.5
+ 25
+ 25
+ 12
+ 12
+ 12
+ 16
+ 16
+ 16
+ 16
+ 16
+ 16
+ 20
+ 20
+ 20
+ 16
+ 16
+ 16
+ 20
+ 20
+ 20
+ 25
+ 25
820
820
820
960
960
960
1200
1200
1200
1375
1375
1375
1800
1800
1800
1900
1900
1900
2265
2265
100
100
100
59
59
59
50
50
50
30
30
30
25
25
25
25
25
25
22
22
- 40
- 40
- 40
- 40
- 40
- 40
- 44
- 44
- 44
- 44
- 44
- 44
- 64
- 64
- 64
- 64
- 64
- 64
- 80
- 80
+ 10.5
+ 10.5
+ 10.5
+ 14
+ 14
+ 14
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 25
+ 25
+ 12
+ 12
+ 12
+ 16
+ 16
+ 16
+ 20
+ 20
+ 20
+ 20
+ 20
+ 20
+ 20
+ 20
+ 20
+ 20
+ 20
+ 20
+ 25
+ 25
820
820
820
900
900
900
1220
1220
1220
1370
1370
1370
1770
1770
1770
1825
1825
1825
2330
2330
175
175
175
100
100
100
60
60
60
40
- 32
- 32
- 32
- 36
- 36
- 36
- 36
- 36
- 36
- 36
+ 10.5
+ 10.5
+ 10.5
+ 14
+ 14
+ 14
+ 14
+ 14
+ 14
+ 14
+ 12
+ 12
+ 12
+ 16
+ 16
+ 16
+ 16
+ 16
+ 16
+ 16
820
820
820
855
855
855
1200
1200
1200
1365
Notes
Dash number will include the letter “H” to indicate the optional vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal
vibration and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
(1)
Revison: 28-Aug-12
Document Number: 40022
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
STANDARD RATINGS/EXTENDED RATINGS: CLR79, M39006/22-XXXX
MAX. (2)
PART NO. M39006/22- (1)
MAX. CAPACITANCE
MAX.
MAX. DCL (μA)
MAX.
FAILURE RATE LEVEL
RIPPLE
CHANGE (%) AT
IMP.
AT
DF
CAP.
(%/1000 h)
CURRENT
CAPACITANCE CASE
AT
AT
TOL.
AT + 85 °C
(μF)
CODE
(± %)
M
P
R
+ 85 °C + 25 °C - 55 °C
40 kHz
+ 25 °C
- 55 °C + 85 °C + 125 °C
()
(%)
1.0
0.1
0.01
+ 125 °C
(mA)
180
180
250
250
250
390
390
390
750
750
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
10
5
20
10
5
20
10
5
20
10
0051
0052
0053
0054
0055
0056
0057
0058
0059
0060
15
15
15
33
33
33
70
70
70
120
120
120
170
170
170
270
270
270
540
540
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0061
0062
0063
0064
0065
0066
0067
0068
0069
0070
0071
0072
0073
0074
0075
0076
0077
0078
0079
0080
10
10
10
22
22
22
50
50
50
100
100
100
120
120
120
180
180
180
350
350
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0081
0082
0083
0084
0085
0086
0087
0088
0089
0090
0091
0092
0093
0094
0095
0096
0097
0098
0099
0100
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
0271
0491
1.0
7.0
30
0272
0492
1.0
7.0
30
0273
0493
2.0
10.0
30
0274
0494
2.0
10.0
30
0275
0495
2.0
10.0
30
0276
0496
2.0
16.0
44
0277
0497
2.0
16.0
44
0278
0498
2.0
16.0
44
0279
0499
4.0
16.0
50
0280
0500
4.0
16.0
50
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
0281
0501
1.0
2.0
5
0282
0502
1.0
2.0
5
0283
0503
1.0
2.0
5
0284
0504
1.0
2.0
10
0285
0505
1.0
2.0
10
0286
0506
1.0
2.0
10
0287
0507
1.0
4.0
13
0288
0508
1.0
4.0
13
0289
0509
1.0
4.0
13
0290
0510
1.0
7.0
18
0291
0511
1.0
7.0
18
0292
0512
1.0
7.0
18
0293
0513
2.0
10.0
25
0294
0514
2.0
10.0
25
0295
0515
2.0
10.0
25
0296
0516
2.0
16.0
32
0297
0517
2.0
16.0
32
0298
0518
2.0
16.0
32
0299
0519
6.0
24.0
40
0300
0520
6.0
24.0
40
25 VDC AT + 85 °C; 15 VDC AT + 125 °C
0301
0521
1.0
2.0
4
0302
0522
1.0
2.0
4
0303
0523
1.0
2.0
4
0304
0524
1.0
2.0
6.6
0305
0525
1.0
2.0
6.6
0306
0526
1.0
2.0
6.6
0307
0527
1.0
2.0
11.0
0308
0528
1.0
2.0
11.0
0309
0529
1.0
2.0
11.0
0310
0530
1.0
10.0
15
0311
0531
1.0
10.0
15
0312
0532
1.0
10.0
15
0313
0533
2.0
6.0
21
0314
0534
2.0
6.0
21
0315
0535
2.0
6.0
21
0316
0536
2.0
18.0
26
0317
0537
2.0
18.0
26
0318
0538
2.0
18.0
26
0319
0539
7.0
28.0
35
0320
0540
7.0
28.0
35
40
40
30
30
30
25
25
25
23
23
- 36
- 36
- 40
- 40
- 40
- 64
- 64
- 64
- 80
- 80
+ 14
+ 14
+ 14
+ 14
+ 14
+ 17.5
+ 17.5
+ 17.5
+ 25
+ 25
+ 16
+ 16
+ 16
+ 16
+ 16
+ 20
+ 20
+ 20
+ 25
+ 25
1365
1365
1720
1720
1720
1800
1800
1800
2360
2360
155
155
155
90
90
90
75
75
75
50
50
50
35
35
35
30
30
30
23
23
- 24
- 24
- 24
- 28
- 28
- 28
- 28
- 28
- 28
- 28
- 28
- 28
- 32
- 32
- 32
- 56
- 56
- 56
- 80
- 80
+ 10.5
+ 10.5
+ 10.5
+ 14
+ 14
+ 14
+ 14
+ 14
+ 14
+ 17.5
+ 17.5
+ 17.5
+ 14
+ 14
+ 14
+ 17.5
+ 17.5
+ 17.5
+ 25
+ 25
+ 12
+ 12
+ 12
+ 16
+ 16
+ 16
+ 16
+ 16
+ 16
+ 20
+ 20
+ 20
+ 16
+ 16
+ 16
+ 20
+ 20
+ 20
+ 25
+ 25
780
780
780
820
820
820
1150
1150
1150
1450
1450
1450
1480
1480
1480
1740
1740
1740
2330
2330
220
220
220
140
140
140
70
70
70
50
50
50
38
38
38
32
32
32
24
24
- 16
- 16
- 16
- 20
- 20
- 20
- 28
- 28
- 28
- 28
- 28
- 28
- 32
- 32
- 32
- 48
- 48
- 48
- 70
- 70
+8
+8
+8
+ 10.5
+ 10.5
+ 10.5
+ 13
+ 13
+ 13
+ 13
+ 13
+ 13
+ 13
+ 13
+ 13
+ 13
+ 13
+ 13
+ 25
+ 25
+9
+9
+9
+ 12
+ 12
+ 12
+ 15
+ 15
+ 15
+ 15
+ 15
+ 15
+ 15
+ 15
+ 15
+ 15
+ 15
+ 15
+ 25
+ 25
715
715
715
825
825
825
1130
1130
1130
1435
1435
1435
1450
1450
1450
1525
1525
1525
1970
1970
Notes
Dash number will include the letter “H” to indicate the optional vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal
vibration and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
(1)
Revison: 28-Aug-12
Document Number: 40022
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
STANDARD RATINGS/EXTENDED RATINGS: CLR79, M39006/22-XXXX
MAX. (2)
PART NO. M39006/22- (1)
MAX. CAPACITANCE
MAX.
MAX. DCL (μA)
MAX.
FAILURE RATE LEVEL
RIPPLE
CHANGE (%) AT
IMP.
AT
DF
CAP.
(%/1000 h)
CURRENT
CAPACITANCE CASE
AT
AT
TOL.
AT + 85 °C
(μF)
CODE
(± %)
M
P
R
+ 85 °C + 25 °C - 55 °C
40 kHz
+ 25 °C
- 55 °C + 85 °C + 125 °C
()
(%)
1.0
0.1
0.01
+ 125 °C
(mA)
8.0
8.0
8.0
15
15
15
40
40
40
68
68
68
100
100
100
150
150
150
300
300
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0101
0102
0103
0104
0105
0106
0107
0108
0109
0110
0111
0112
0113
0114
0115
0116
0117
0118
0119
0120
5.0
5.0
5.0
10
10
10
25
25
25
47
47
47
60
60
60
82
82
82
160
160
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0121
0122
0123
0124
0125
0126
0127
0128
0129
0130
0131
0132
0133
0134
0135
0136
0137
0138
0139
0140
4.0
4.0
4.0
8.2
8.2
8.2
20
20
20
39
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
20
10
5
20
10
5
20
10
5
20
0141
0142
0143
0144
0145
0146
0147
0148
0149
0150
30 VDC AT + 85 °C; 20 VDC AT + 125 °C
0321
0541
1.0
2.0
4
0322
0542
1.0
2.0
4
0323
0543
1.0
2.0
4
0324
0544
1.0
2.0
5
0325
0545
1.0
2.0
5
0326
0546
1.0
2.0
5
0327
0547
1.0
5.0
10
0328
0548
1.0
5.0
10
0329
0549
1.0
5.0
10
0330
0550
1.0
8.0
13
0331
0551
1.0
8.0
13
0332
0552
1.0
8.0
13
0333
0553
2.0
12.0
17
0334
0554
2.0
12.0
17
0335
0555
2.0
12.0
17
0336
0556
2.0
18.0
23
0337
0557
2.0
18.0
23
0338
0558
2.0
18.0
23
0339
0559
8.0
32.0
31
0340
0560
8.0
32.0
31
50 VDC AT + 85 °C; 30 VDC AT + 125 °C
0341
0561
1.0
2.0
3
0342
0562
1.0
2.0
3
0343
0563
1.0
2.0
3
0344
0564
1.0
2.0
4
0345
0565
1.0
2.0
4
0346
0566
1.0
2.0
4
0347
0567
1.0
5.0
8
0348
0568
1.0
5.0
8
0349
0569
1.0
5.0
8
0350
0570
1.0
9.0
11
0351
0571
1.0
9.0
11
0352
0572
1.0
9.0
11
0353
0573
2.0
12.0
12
0354
0574
2.0
12.0
12
0355
0575
2.0
12.0
12
0356
0576
2.0
16.0
15
0357
0577
2.0
16.0
15
0358
0578
2.0
16.0
15
0359
0579
8.0
32.0
17
0360
0580
8.0
32.0
17
60 VDC AT + 85 °C; 40 VDC AT + 125 °C
0361
0581
1.0
2.0
2.8
0362
0582
1.0
2.0
2.8
0363
0583
1.0
2.0
2.8
0364
0584
1.0
2.0
4
0365
0585
1.0
2.0
4
0366
0586
1.0
2.0
4
0367
0587
1.0
5.0
7
0368
0588
1.0
5.0
7
0369
0589
1.0
5.0
7
0370
0590
1.0
9.0
10
275
275
275
175
175
175
65
65
65
60
60
60
40
40
40
35
35
35
25
25
- 16
- 16
- 16
- 20
- 20
- 20
- 24
- 24
- 24
- 24
- 24
- 24
- 28
- 28
- 28
- 48
- 48
- 48
- 60
- 60
+8
+8
+8
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 13
+ 13
+ 13
+ 10.5
+ 10.5
+ 10.5
+ 13
+ 13
+ 13
+ 25
+ 25
+ 12
+ 12
+ 12
+ 12
+ 12
+ 12
+ 12
+ 12
+ 12
+ 15
+ 15
+ 15
+ 12
+ 12
+ 12
+ 15
+ 15
+ 15
+ 25
+ 25
640
640
640
780
780
780
1120
1120
1120
1285
1285
1285
1450
1450
1450
1525
1525
1525
1950
1950
400
400
400
250
250
250
95
95
95
70
70
70
45
45
45
45
45
45
27
27
- 16
- 16
- 16
- 24
- 24
- 24
- 20
- 20
- 20
- 28
- 28
- 28
- 16
- 16
- 16
- 32
- 32
- 32
- 50
- 50
+5
+5
+5
+8
+8
+8
+ 10.5
+ 10.5
+ 10.5
+ 13
+ 13
+ 13
+ 10.5
+ 10.5
+ 10.5
+ 13
+ 13
+ 13
+ 25
+ 25
+6
+6
+6
+9
+9
+9
+ 12
+ 12
+ 12
+ 15
+ 15
+ 15
+ 12
+ 12
+ 12
+ 15
+ 15
+ 15
+ 25
+ 25
580
580
580
715
715
715
1005
1005
1005
1155
1155
1155
1335
1335
1335
1400
1400
1400
1900
1900
550
550
550
275
275
275
105
105
105
90
- 16
- 16
- 16
- 24
- 24
- 24
- 16
- 16
- 16
- 28
+5
+5
+5
+8
+8
+8
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+6
+6
+6
+9
+9
+9
+ 12
+ 12
+ 12
+ 12
525
525
525
625
625
625
930
930
930
1110
Notes
Dash number will include the letter “H” to indicate the optional vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal
vibration and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
(1)
Revison: 28-Aug-12
Document Number: 40022
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
STANDARD RATINGS/EXTENDED RATINGS: CLR79, M39006/22-XXXX
MAX. (2)
PART NO. M39006/22- (1)
MAX. CAPACITANCE
MAX.
MAX. DCL (μA)
MAX.
FAILURE RATE LEVEL
RIPPLE
CHANGE (%) AT
IMP.
AT
DF
CAP.
(%/1000 h)
CURRENT
CAPACITANCE CASE
AT
AT
TOL.
AT + 85 °C
(μF)
CODE
(± %)
M
P
R
+ 85 °C + 25 °C - 55 °C
40 kHz
+ 25 °C
- 55 °C + 85 °C + 125 °C
()
(%)
1.0
0.1
0.01
+ 125 °C
(mA)
39
39
50
50
50
68
68
68
140
140
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
10
5
20
10
5
20
10
5
20
10
0151
0152
0153
0154
0155
0156
0157
0158
0159
0160
3.5
3.5
3.5
6.8
6.8
6.8
15
15
15
33
33
33
40
40
40
56
56
56
110
110
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0161
0162
0163
0164
0165
0166
0167
0168
0169
0170
0171
0172
0173
0174
0175
0176
0177
0178
0179
0180
2.5
2.5
2.5
4.7
4.7
4.7
11
11
11
22
22
22
30
30
30
43
43
43
86
86
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0181
0182
0183
0184
0185
0186
0187
0188
0189
0190
0191
0192
0193
0194
0195
0196
0197
0198
0199
0200
60 VDC AT + 85 °C; 40 VDC AT + 125 °C
0371
0591
1.0
9.0
10
0372
0592
1.0
9.0
10
0373
0593
2.0
12.0
10
0374
0594
2.0
12.0
10
0375
0595
2.0
12.0
10
0376
0596
2.0
16.0
13
0377
0597
2.0
16.0
13
0378
0598
2.0
16.0
13
0379
0599
8.0
32.0
16
0380
0600
8.0
32.0
16
75 VDC AT + 85 °C; 50 VDC AT + 125 °C
0381
0601
1.0
2.0
2.5
0382
0602
1.0
2.0
2.5
0383
0603
1.0
2.0
2.5
0384
0604
1.0
2.0
3.5
0385
0605
1.0
2.0
3.5
0386
0606
1.0
2.0
3.5
0387
0607
1.0
5.0
6
0388
0608
1.0
5.0
6
0389
0609
1.0
5.0
6
0390
0610
1.0
10.0
10
0391
0611
1.0
10.0
10
0392
0612
1.0
10.0
10
0393
0613
2.0
12.0
9
0394
0614
2.0
12.0
9
0395
0615
2.0
12.0
9
0396
0616
2.0
17.0
11
0397
0617
2.0
17.0
11
0398
0618
2.0
17.0
11
0399
0619
9.0
36.0
12
0400
0620
9.0
36.0
12
100 VDC AT + 85 °C; 65 VDC AT + 125 °C
0401
0621
1.0
2.0
2
0402
0622
1.0
2.0
2
0403
0623
1.0
2.0
2
0404
0624
1.0
2.0
3
0405
0625
1.0
2.0
3
0406
0626
1.0
2.0
3
0407
0627
1.0
4.0
5
0408
0628
1.0
4.0
5
0409
0629
1.0
4.0
5
0410
0630
1.0
9.0
7.5
0411
0631
1.0
9.0
7.5
0412
0632
1.0
9.0
7.5
0413
0633
2.0
12.0
7
0414
0634
2.0
12.0
7
0415
0635
2.0
12.0
7
0416
0636
2.0
17.0
8.5
0417
0637
2.0
17.0
8.5
0418
0638
2.0
17.0
8.5
0419
0639
9.0
36.0
10
0420
0640
9.0
36.0
10
90
90
50
50
50
50
50
50
28
28
- 28
- 28
- 16
- 16
- 16
- 32
- 32
- 32
- 40
- 40
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 20
+ 20
+ 12
+ 12
+ 12
+ 12
+ 12
+ 12
+ 12
+ 12
+ 20
+ 20
1110
1110
1330
1330
1330
1365
1365
1365
1850
1850
650
650
650
300
300
300
150
150
150
90
90
90
60
60
60
60
60
60
29
29
- 16
- 16
- 16
- 20
- 20
- 20
- 16
- 16
- 16
- 24
- 24
- 24
- 16
- 16
- 16
- 28
- 28
- 28
- 35
- 35
+5
+5
+5
+8
+8
+8
+8
+8
+8
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 10.5
+ 20
+ 20
+6
+6
+6
+9
+9
+9
+9
+9
+9
+ 15
+ 15
+ 15
+ 12
+ 12
+ 12
+ 15
+ 15
+ 15
+ 20
+ 20
525
525
525
610
610
610
890
890
890
1000
1000
1000
1250
1250
1250
1335
1335
1335
1850
1850
950
950
950
500
500
500
200
200
200
100
100
100
80
80
80
70
70
70
30
30
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 20
- 20
- 20
- 25
- 25
+7
+7
+7
+7
+7
+7
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+ 15
+ 15
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+ 15
+ 15
505
505
505
565
565
565
835
835
835
965
965
965
1240
1240
1240
1335
1335
1335
1800
1800
Notes
Dash number will include the letter “H” to indicate the optional vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal
vibration and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
(1)
Revison: 28-Aug-12
Document Number: 40022
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
STANDARD RATINGS/EXTENDED RATINGS: CLR79, M39006/22-XXXX
MAX. (2)
PART NO. M39006/22- (1)
MAX. CAPACITANCE
MAX.
MAX. DCL (μA)
MAX.
FAILURE RATE LEVEL
RIPPLE
CHANGE (%) AT
IMP.
AT
DF
CAP.
(%/1000 h)
CURRENT
CAPACITANCE CASE
AT
AT
TOL.
AT + 85 °C
(μF)
CODE
(± %)
M
P
R
+ 85 °C + 25 °C - 55 °C
40 kHz
+ 25 °C
- 55 °C + 85 °C + 125 °C
()
(%)
1.0
0.1
0.01
+ 125 °C
(mA)
1.7
1.7
1.7
3.6
3.6
3.6
9.0
9.0
9.0
14
14
14
18
18
18
25
25
25
56
56
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0201
0202
0203
0204
0205
0206
0207
0208
0209
0210
0211
0212
0213
0214
0215
0216
0217
0218
0219
0220
125 VDC AT + 85 °C; 85 VDC AT + 125 °C
0421
0641
1.0
2.0
2
1250
0422
0642
1.0
2.0
2
1250
0423
0643
1.0
2.0
2
1250
0424
0644
1.0
2.0
2.7
600
0425
0645
1.0
2.0
2.7
600
0426
0646
1.0
2.0
2.7
600
0427
0647
1.0
5.0
5
240
0428
0648
1.0
5.0
5
240
0429
0649
1.0
5.0
5
240
0430
0650
1.0
7.0
6
167
0431
0651
1.0
7.0
6
167
0432
0652
1.0
7.0
6
167
0433
0653
2.0
9.0
5
129
0434
0654
2.0
9.0
5
129
0435
0655
2.0
9.0
5
129
0436
0656
2.0
13.0
6
93
0437
0657
2.0
13.0
6
93
0438
0658
2.0
13.0
6
93
0439
0659
10.0
40.0
6.5
32
0440
0660
10.0
40.0
6.5
32
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 25
- 25
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+ 15
+ 15
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+ 15
+ 15
415
415
415
520
520
520
755
755
755
860
860
860
1130
1130
1130
1200
1200
1200
1800
1800
Notes
Dash number will include the letter “H” to indicate the optional vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal
vibration and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
(1)
STANDARD RATINGS/EXTENDED RATINGS: CLR81, M39006/25-XXXX
MAX. (1)
PART NO. M39006/25- (1)
MAX. CAPACITANCE
MAX.
MAX. DCL (μA)
MAX.
FAILURE RATE LEVEL
RIPPLE
CHANGE (%) AT
IMP.
AT
DF
CAP.
(%/1000 h)
CURRENT
CAPACITANCE CASE
AT
AT
TOL.
AT + 85 °C
(μF)
CODE
(± %)
+ 85 °C + 25 °C - 55 °C
M
P
R
40 kHz
+ 25 °C
55
°C
+
85
°C
+
125
°C
()
(%)
1.0
0.1
0.01
+ 125 °C
(mA)
220
220
820
820
1500
1500
2200
2200
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0001
0002
0003
0004
0005
0006
0007
0008
0089
0090
0091
0092
0093
0094
0095
0096
180
180
680
680
1500
1500
1800
1800
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0009
0010
0011
0012
0013
0014
0015
0016
0097
0098
0099
0100
0101
0102
0103
0104
6 VDC AT + 85 °C; 4 VDC AT + 125 °C
0177
2.0
9.0
50
0178
2.0
9.0
50
0179
3.0
14.0
155
0180
3.0
14.0
155
0181
5.0
20.0
172
0182
5.0
20.0
172
0183
6.0
24.0
170
0184
6.0
24.0
170
8 VDC AT + 85 °C; 5 VDC AT + 125 °C
0185
2.0
9.0
41
0186
2.0
9.0
41
0187
3.0
14.0
130
0188
3.0
14.0
130
0189
5.0
20.0
170
0190
5.0
20.0
170
0191
7.0
25.0
138
0192
7.0
25.0
138
36
36
18
18
18
18
13
13
- 64
- 64
- 88
- 88
- 90
- 90
- 90
- 90
+ 13
+ 13
+ 16
+ 16
+ 20
+ 20
+ 25
+ 25
+ 16
+ 16
+ 20
+ 20
+ 25
+ 25
+ 30
+ 30
1000
1000
1500
1500
1900
1900
2300
2300
45
45
22
22
18
18
14
14
- 60
- 60
- 83
- 83
- 90
- 90
- 90
- 90
+ 13
+ 13
+ 16
+ 16
+ 20
+ 20
+ 25
+ 25
+ 16
+ 16
+ 20
+ 20
+ 25
+ 25
+ 30
+ 30
1000
1000
1500
1500
1900
1900
2300
2300
Notes
(1) Dash number will include the letter “H” to indicate the optional vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal
vibration and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
Revison: 28-Aug-12
Document Number: 40022
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
STANDARD RATINGS/EXTENDED RATINGS: CLR81, M39006/25-XXXX
MAX. (1)
PART NO. M39006/25- (1)
MAX. CAPACITANCE
MAX.
MAX. DCL (μA)
MAX.
FAILURE RATE LEVEL
RIPPLE
CHANGE (%) AT
IMP.
AT
DF
CAP.
(%/1000 h)
CURRENT
CAPACITANCE CASE
AT
AT
TOL.
AT + 85 °C
(μF)
CODE
(± %)
M
P
R
+ 85 °C + 25 °C - 55 °C
40 kHz
+ 25 °C
- 55 °C + 85 °C + 125 °C
()
(%)
1.0
0.1
0.01
+ 125 °C
(mA)
150
150
560
560
1200
1200
1500
1500
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0017
0018
0019
0020
0021
0022
0023
0024
100
100
390
390
820
820
1000
1000
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0025
0026
0027
0028
0029
0030
0031
0032
68
68
270
270
560
560
680
680
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0033
0034
0035
0036
0037
0038
0039
0040
56
56
220
220
470
470
560
560
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0041
0042
0043
0044
0045
0046
0047
0048
33
33
120
120
270
270
330
330
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0049
0050
0051
0052
0053
0054
0055
0056
27
27
100
100
220
220
270
270
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0057
0058
0059
0060
0061
0062
0063
0064
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
0193
2.0
9.0
34
0194
2.0
9.0
34
0195
3.0
16.0
106
0196
3.0
16.0
106
0197
5.0
20.0
137
0198
5.0
20.0
137
0199
7.0
25.0
114
0200
7.0
25.0
114
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
0113
0201
2.0
9.0
30
0114
0202
2.0
9.0
30
0115
0203
3.0
16.0
74
0116
0204
3.0
16.0
74
0117
0205
6.0
24.0
111
0118
0206
6.0
24.0
111
0119
0207
8.0
32.0
92
0120
0208
8.0
32.0
92
25 VDC AT + 85 °C; 15 VDC AT + 125 °C
0121
0209
2.0
9.0
22
0122
0210
2.0
9.0
22
0123
0211
3.0
16.0
55
0124
0212
3.0
16.0
55
0125
0213
7.0
28.0
76
0126
0214
7.0
28.0
76
0127
0215
8.0
32.0
63
0128
0216
8.0
32.0
63
30 VDC AT + 85 °C; 20 VDC AT + 125 °C
0129
0217
2.0
9.0
22
0130
0218
2.0
9.0
22
0131
0219
3.0
16.0
42
0132
0220
3.0
16.0
42
0133
0221
8.0
32.0
64
0134
0222
8.0
32.0
64
0135
0223
9.0
36.0
55
0136
0224
9.0
36.0
55
50 VDC AT + 85 °C; 30 VDC AT + 125 °C
0137
0225
2.0
9.0
12.3
0138
0226
2.0
9.0
12.3
0139
0227
4.0
24.0
22.5
0140
0228
4.0
24.0
22.5
0141
0229
8.0
32.0
37
0142
0230
8.0
32.0
37
0143
0231
9.0
36.0
38
0144
0232
9.0
36.0
38
60 VDC AT + 85 °C;. 40 VDC AT + 125 °C
0145
0233
3.0
12.0
10.2
0146
0234
3.0
12.0
10.2
0147
0235
4.0
20.0
19
0148
0236
4.0
20.0
19
0149
0237
8.0
32.0
30
0150
0238
8.0
32.0
30
0151
0239
9.0
36.0
27
0152
0240
9.0
36.0
27
0105
0106
0107
0108
0109
0110
0111
0112
54
54
27
27
18
18
15
15
- 55
- 55
- 77
- 77
- 88
- 88
- 88
- 88
+ 13
+ 13
+ 16
+ 16
+ 20
+ 20
+ 25
+ 25
+ 16
+ 16
+ 20
+ 20
+ 25
+ 25
+ 30
+ 30
900
900
1450
1450
1850
1850
2300
2300
72
72
31
31
22
22
17
17
- 44
- 44
- 66
- 66
- 77
- 77
- 77
- 77
+ 13
+ 13
+ 16
+ 16
+ 20
+ 20
+ 25
+ 25
+ 16
+ 16
+ 20
+ 20
+ 25
+ 25
+ 30
+ 30
900
900
1450
1450
1800
1800
2300
2300
90
90
33
33
24
24
19
19
- 40
- 40
- 62
- 62
- 72
- 72
- 72
- 72
+ 12
+ 12
+ 13
+ 13
+ 20
+ 20
+ 25
+ 25
+ 15
+ 15
+ 16
+ 16
+ 25
+ 25
+ 30
+ 30
850
850
1400
1400
1750
1750
2100
2100
100
100
36
36
25
25
20
20
- 38
- 38
- 60
- 60
- 65
- 65
- 65
- 65
+ 12
+ 12
+ 13
+ 13
+ 20
+ 20
+ 25
+ 25
+ 15
+ 15
+ 16
+ 16
+ 25
+ 25
+ 30
+ 30
800
800
1200
1200
1500
1500
2000
2000
135
135
49
49
29
29
22
22
- 29
- 29
- 42
- 42
- 46
- 46
- 46
- 46
+ 10
+ 10
+ 12
+ 12
+ 20
+ 20
+ 25
+ 25
+ 12
+ 12
+ 15
+ 15
+ 25
+ 25
+ 30
+ 30
700
700
1200
1200
1450
1450
1900
1900
144
144
54
54
29
29
23
23
- 24
- 24
- 36
- 36
- 40
- 40
- 45
- 45
+ 10
+ 10
+ 12
+ 12
+ 16
+ 16
+ 20
+ 20
+ 12
+ 12
+ 15
+ 15
+ 20
+ 20
+ 25
+ 25
700
700
1100
1100
1400
1400
1850
1850
Notes
(1) Dash number will include the letter “H” to indicate the optional vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal
vibration and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
Revison: 28-Aug-12
Document Number: 40022
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M39006/22, M39006/25
www.vishay.com
Vishay
STANDARD RATINGS/EXTENDED RATINGS: CLR81, M39006/25-XXXX
MAX. (1)
PART NO. M39006/25- (1)
MAX. CAPACITANCE
MAX.
MAX. DCL (μA)
MAX.
FAILURE RATE LEVEL
RIPPLE
CHANGE (%) AT
IMP.
AT
DF
CAP.
(%/1000 h)
CURRENT
CAPACITANCE CASE
AT
AT
TOL.
AT + 85 °C
(μF)
CODE
(± %)
M
P
R
+ 85 °C + 25 °C - 55 °C
40 kHz
+ 25 °C
- 55 °C + 85 °C + 125 °C
()
(%)
1.0
0.1
0.01
+ 125 °C
(mA)
22
22
82
82
180
180
220
220
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0065
0066
0067
0068
0069
0070
0071
0072
10
10
39
39
68
68
120
120
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0073
0074
0075
0076
0077
0078
0079
0080
6.8
6.8
27
27
47
47
82
82
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0081
0082
0083
0084
0085
0086
0087
0088
75 VDC AT + 85 °C; 50 VDC AT + 125 °C
0153
0241
3.0
12.0
8.5
0154
0242
3.0
12.0
8.5
0155
0243
4.0
24.0
15.2
0156
0244
4.0
24.0
15.2
0157
0245
9.0
36.0
24.4
0158
0246
9.0
36.0
24.4
0159
0247
10.0
40.0
37.0
0160
0248
10.0
40.0
37.0
100 VDC AT + 85 °C; 65 VDC AT + 125 °C
0161
0249
3.0
12.0
4.5
0162
0250
3.0
12.0
4.5
0163
0251
5.0
24.0
10.4
0164
0252
5.0
24.0
10.4
0165
0253
10.0
40.0
11.3
0166
0254
10.0
40.0
11.3
0167
0255
12.0
48.0
25
0168
0256
12.0
48.0
25
125 VDC AT + 85 °C; 85 VDC AT + 125 °C
0169
0257
3.0
12.0
6.0
0170
0258
3.0
12.0
6.0
0171
0259
5.0
24.0
7.2
0172
0260
5.0
24.0
7.2
0173
0261
10.0
40.0
7.9
0174
0262
10.0
40.0
7.9
0175
0263
12.0
48.0
17.4
0176
0264
12.0
48.0
17.4
157
157
63
63
30
30
24
24
- 19
- 19
- 30
- 30
- 35
- 35
- 40
- 40
+ 10
+ 10
+ 12
+ 12
+ 16
+ 16
+ 20
+ 20
+ 12
+ 12
+ 15
+ 15
+ 20
+ 20
+ 25
+ 25
600
600
1000
1000
1300
1300
1800
1800
200
200
80
80
40
40
30
30
- 17
- 17
- 20
- 20
- 30
- 30
- 35
- 35
+ 10
+ 10
+ 12
+ 12
+ 14
+ 14
+ 15
+ 15
+ 12
+ 12
+ 15
+ 15
+ 16
+ 16
+ 17
+ 17
800
800
1300
1300
1600
1600
2000
2000
300
300
90
90
50
50
32
32
- 14
- 14
- 18
- 18
- 26
- 26
- 30
- 30
+ 10
+ 10
+ 12
+ 12
+ 14
+ 14
+ 15
+ 15
+ 12
+ 12
+ 15
+ 15
+ 16
+ 16
+ 17
+ 17
700
700
1200
1200
1500
1500
1900
1900
Notes
(1) Dash number will include the letter “H” to indicate the optional vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal
vibration and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
CLR79, CLR81 RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE AND
APPLIED PEAK VOLTAGE
FREQUENCY OF
APPLIED RIPPLE
CURRENT
AMBIENT
STILL AIR
% OF
APPLIED
VOLTAGE
120 Hz
800 Hz
1 kHz
10 kHz
40 kHz
100 kHz
TEMP °C
TEMP °C
TEMP °C
TEMP °C
TEMP °C
TEMP °C
 55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125
100 % 0.60 0.39
-
-
0.71 0.43
-
-
0.72 0.46
-
-
0.88 0.55
-
-
1.0 0.63
-
-
1.1 0.69
-
-
90 %
0.60 0.46
-
-
0.71 0.55
-
-
0.72 0.55
-
-
0.88 0.67
-
-
1.0 0.77
-
-
1.1 0.85
-
-
80 %
0.60 0.52 0.35
-
0.71 0.62 0.42
-
0.72 0.62 0.42
-
0.88 0.76 0.52
-
1.0 0.87 0.59
-
1.1 0.96 0.65
-
70 %
0.60 0.58 0.44
-
0.71 0.69 0.52
-
0.72 0.70 0.52
-
0.88 0.85 0.64
-
1.0 0.97 0.73
-
1.1 1.07 0.80
-
66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50
Notes
1. At + 125 °C the rated voltage of the capacitors decreases to 66 2/3 % of the + 85 °C rated voltage.
2. The peak of the applied AC ripple voltage plus the applied DC voltage must not exceed the DC voltage rating of the capacitor eitherforward
or reverse.
3. The ripple current listed represents a rating calculated using a maximum internal temperature rise (T) of + 50 °C at 40 kHz at + 85 °C
ambient with a maximum peak rated voltage of 66 2/3 % of the + 85 °C peak voltage rating.
4. The maximum allowable internal temperature rise (T) decreases linearly to a calculated + 10 °C rise at + 125 °C ambient.
5. The internal temperature rise is directly proportional to the equivalent series resistance of the capacitor and equivalent series
resistance increases with decreasing frequency.
Revison: 28-Aug-12
Document Number: 40022
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000