BOURNS CDSOT236

HDMI® Port
HDMI 1.3 - ESD & Overcurrent Protection
Solution Products
CDDFN10-0524P
CDSOT236-0504LC
Objective
Compliance
HDMI 1.3 interfaces are 3.3 V differential
digital signals with single-link bandwidths
up to 340 MHz (10.2 Gbit/s). As usage of
HDMI ports increases, HDMI ports face a
growing threat of ESD damage.
IEC 61000-4-2 Level 4 (8 kV / 15 kV)
Solution
Benefit
2 TVS Diode Arrays: CDDFN10-0524P
1 TVS Diode Array: CDSOT236-0504LC
1 Multifuse® PPTC: MF-FSMF020X-2
This solution provides IEC 61000 Level 4 ESD
protection without impairing the HDMI signal.
D2+
GND
D2D1+
GND
D1D0+
GND
D0CK+
GND
CK-
MF-FSMF020X-2
Other PortNote® Solutions:
• HDMI: HDMI 1.4 - ESD & Overcurrent Protection
D2+
D2CDDFN10-0524P
D1+
D1D0+
D0-
CDDFN10-0524P
CK+
CK-
CE_REMOTE
NC
DDC_CLK
DDC_DAT
HOTPLUG_DET
GND
+5 VOUT
Design Kit
Alternate Recommendations
CDSOT236-0504LC
CE REMOTE
DDC_CLK
DDC_DAT
HOTPLUG_DET
5V
MF-FSMF020X-2
PN-DESIGNKIT 11
The schematic above illustrates the application protection and does not constitute the complete
circuit design. Customers should verify actual device performance in their specific applications.
Americas: Tel +1-951 781-5500
Fax +1-951 781-5700
Europe: Tel +41-(0)41 768 55 55 Asia-Pacific: Tel +886-2 256 241 17
Fax +41-(0)41 768 55 10 Fax +886-2 256 241 16
COPYRIGHT© 2011 • BOURNS, INC. • 8/11 • e/CPK1023 • “PortNote” is a registered service mark of Bourns, Inc.
“Bourns” and “Multifuse” are registered trademarks of Bourns, Inc. in the U.S. and other countries.
“HDMI” is a registered trademark of its owner.
Bourns® PortNote® solutions provide protection
recommendations for typical port threats.
For more information, go to:
www.bourns.com
or email: [email protected]