TLP197D TOSHIBA Photocoupler Photorelay TLP197D PC Card Modems PBX Measurement Equipment Unit: mm The Toshiba TLP197D consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a SOP package. TLP197D is housed in a compact and thin SOP package and has characteristics of high-withstanding voltage and low ON-state resistance, which enable TLP197D to be applied in hook switches, dial-pulse switches for modems and facsimiles, and switches for test circuit switching in PBXes. • 6-pin SOP (2.54SOP6): Height = 2.1 mm, pitch = 2.54 mm • Normally open (1-form-A) device • Peak OFF-state voltage: 200 V (min) • Trigger LED current: 3 mA (max) • ON-state current: 200 mA (max) • ON-state resistance: 8 Ω (max) • Isolation voltage: 1500 Vrms (min) JEDEC ― • UL recognized: UL1577, file no. E67349 JEITA ― TOSHIBA Pin Configuration (top view) 1 6 11-7C1 Weight: 0.13 g (typ.) 1: Anode 2: Cathode 2 5 4: Drain D1 5: Source 3 4 6: Drain D2 Schematic 1 6 2 5 4 1 2007-10-01 TLP197D Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit IF 50 mA Forward current derating (Ta > = 25°C) ΔIF/°C −0.5 mA/°C Peak forward current (100 μs pulse, 100 pps) IFP 1 A Reverse voltage VR 5 V Tj 125 °C VOFF 200 V LED Forward current Junction temperature Off-state output terminal voltage A connection Detector On-state current B connection 200 ION On-state current derating (Ta > = 25°C) 400 −2.0 A connection B connection ΔION/°C −2.0 mA/°C −4.0 C connection Junction temperature mA 200 C connection Tj 125 °C Operating temperature range Topr −40 to 85 °C Storage temperature range Tstg −55 to 125 °C Lead soldering temperature (10 s) Tsol 260 °C Isolation voltage (AC, 1 min, R.H. < = 60%) BVS 1500 Vrms (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pins 1, 2 and 3 are shorted together, and pins 4, 5 and 6 are shorted together. Recommended Operating Conditions Characteristics Symbol Min Typ. Max Unit Supply voltage VDD ⎯ ⎯ 160 V Forward current IF 5 7.5 25 mA On-state current ION ⎯ ⎯ 130 mA Operating temperature Topr −20 ⎯ 60 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Circuit Connections 1 6 2 5 3 4 A Connection LOAD AC or DC 1 6 2 5 3 4 B Connection 2 LOAD DC 1 6 2 5 3 4 LOAD DC C Connection 2007-10-01 TLP197D Electrical Characteristics (Ta = 25°C) Detector LED Characteristics Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V ⎯ ⎯ 10 μA Capacitance CT V = 0, f = 1 MHz ⎯ 30 ⎯ pF Off-state current IOFF VOFF = 200 V ⎯ ⎯ 1 μA Capacitance COFF V = 0, f = 1 MHz ⎯ 100 ⎯ pF Min Typ. Max Unit Coupled Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Trigger LED current IFT ION = 200 mA ⎯ 1 3 mA Return LED current IFC IOFF = 100 μA 0.1 ⎯ ⎯ mA ION = 200 mA, IF = 5 mA ⎯ 5 8 ION = 200 mA, IF = 5 mA ⎯ 3 5 ION = 400 mA, IF = 5 mA ⎯ 1.4 ⎯ Test Condition Min Typ. Max Unit 0.8 ⎯ pF ⎯ Ω A connection On-state resistance RON B connection C connection Ω Isolation Characteristics (Ta = 25°C) Characteristics Symbol Capacitance input to output Isolation resistance CS VS = 0, f = 1 MHz ⎯ RS VS = 500 V, R.H. < = 60% 5 × 10 BVS 10 14 1500 ⎯ ⎯ AC, 1 s, in oil ⎯ 3000 ⎯ DC, 1 min, in oil ⎯ 3000 ⎯ Vdc Min Typ. Max Unit ⎯ 0.6 1.5 ms ⎯ 0.1 1.0 ms AC, 1 min Isolation voltage 10 Vrms Switching Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Turn-on time tON RL = 200 Ω Turn-off time tOFF VDD = 20 V, IF = 5 mA (Note 2) Note 2: Switching time test circuit IF 1 6 2 RL VDD IF VOUT VOUT 4 10% tON 3 90% tOFF 2007-10-01 TLP197D IF – Ta ION – Ta 600 (mA) 80 On-state current ION Allowable forward current IF (mA) 100 60 40 20 0 −20 0 20 40 60 80 100 500 C connection 400 300 200 A connection, B connection 100 0 −20 120 0 Ambient temperature Ta (°C) 20 40 IF – V F (mA) 10 On-state current ION Forward current IF (mA) 30 3 1 0.3 1.2 1.4 Forward voltage VF 1.6 100 0 −100 −200 −3 1.8 −2 (V) −1 ION = 200 mA IF = 5 mA t<1s 3 (V) ION = 200 mA 4 2 0 2 IFT – Ta 6 0 −20 1 5 Trigger LED current IFC (mA) On-state resistance RON (Ω) 8 0 On-state voltage VON RON – Ta 10 120 Ta = 25°C, A connection IF = 5 mA Ta = 25°C 1 100 ION – VON 200 0.8 80 Ambient temperature Ta (°C) 100 0.1 0.6 60 20 40 60 80 t<1s 4 3 2 1 0 −40 100 Ambient temperature Ta (°C) −20 0 20 40 60 80 100 Ambient temperature Ta (°C) 4 2007-10-01 TLP197D tON, tOFF – IF tON, tOFF – Ta 3000 3000 VDD = 20 V, RL = 200 Ω Ta = 25°C 1000 tON (μs) 1000 Switching time tON, tOFF (μs) Switching time tON, tOFF IF = 5 mA VDD = 20 V, RL = 200 Ω tON 300 100 tOFF 30 300 100 10 −40 10 1 3 10 30 Input current 100 tOFF 30 −20 0 20 40 60 80 100 Ambient temperature Ta (°C) 300 IF (mA) IOFF – Ta 100 Off-state current IOFF (nA) VOFF = 200 V 30 10 3 1 −20 0 20 40 60 80 100 Ambient temperature Ta (°C) 5 2007-10-01 TLP197D RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01