TD62551,553~555S TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62551S,TD62553S,TD62554S,TD62555S 4CH SINGLE DRIVER : COMMON EMITTER The TD62551S are comprised of four NPN transistor arrays. Applications include relay, hammer, lamp and display (LED) drivers. FEATURES l Output current (single output) 150 mA (Max) l High sustaining voltage output 25 V (Min) l Low saturation voltage VCE (sat) = 0.5 V @IOUT = 50 mA l Inputs compatible with various types of logic. l TD62551S : External l TD62553S : RIN = 2.7 kΩ ...... TTL, 5 V CMOS l TD62554S : RIN = 10.5 kΩ .... 6~15 V PMOS, CMOS l TD62555S : RIN = 20 kΩ ....... 12~24 V PMOS l Package type : SIP−9 pin Weight: 0.92 g (Typ.) PIN CONNECTION SCHEMATICS (EACH DRIVER) TD62551S Note: The input and output parasitic diodes cannot be used as clamp diodes. 1 2001-07-04 TD62551,553~555S MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC SYMBOL RATING UNIT Collector−Emitter Voltage VCEO 25 V Collector−Base Voltage VCBO 35 V IC 150 mA / ch Collector Current Input Voltage VIN (Note 1) 20 V Input Current IIN (Note 2) 10 mA Power Dissipation PD (Note 3) 0.75 W Operating Temperature Topr −40~85 °C Storage Temperature Tstg −55~150 °C Note 1: Except TD62551S Note 2: Only TD62551S Note 3: Delated above 25°C in the proportion of 6.0mW / °C. RECOMMENDED OPERATING CONDITIONS (Ta = −40~85°C) CHARACTERISTIC SYMBOL CONDITION MIN TYP. MAX UNIT Collecter−Emitter Voltage VCEO ― 0 ― 25 V Collecter−Base Voltage VCBO ― 0 ― 35 V 0 ― 100 0 ― 80 0 ― 60 TD62551S TD62553S Collector Current TD62554S IC ― TD62555S mA / ch Input Voltage TD62553S TD62554S TD62555S VIN ― 0 ― 20 V Input Current TD62551S IIN ― 0 ― 5 mA PD ― ― ― 0.27 W MIN TYP. MAX UNIT VCE = 25 V, VIN = 0 V ― ― 10 µA IIN = 0.5 mA, IC = 10 mA ― 0.15 0.2 IIN = 2.5 mA, IC = 50 mA ― 0.35 0.5 60 ― 400 50 ― 400 1.7 2.1 2.5 4.4 6.0 7.6 7.7 10.7 13.8 ― 100 ― ― 500 ― Power Dissipation ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC Output Leakage Current Collector−Emitter Saturation Voltage DC Current Transfer Ratio (Note 1) (Note 2) SYMBOL TEST CIR− CUIT ICEX 1 VCE (sat) 2 hFE 2 TEST CONDITION VCE = 5 V, IC = 10 mA TD62553S Input Voltage TD62554S VIN (ON) 3 IIN = 0.5 mA, IC = 10 mA Td62555S Turn−On Delay tON Turn−Off Delay tOFF 4 VOUT = 25 V, RL = 210 Ω CL = 15 pF V ― V ns Note 1: Except TD62551S. Note 2: Only TD62551S. 2 2001-07-04 TD62551,553~555S TEST CIRCUIT 1. ICEX 2. hFE, VCE (sat) 3. VIN (ON) 4. tON, tOFF Note 1: Pulse Width 50 µs, Duty Cycle 10% Output Impedance 50 Ω, tr ≤ 5 ns, tf ≤ 10 ns Note 2: See right. Note 3: CL includes probe and jig capacitance. INPUT CONDITION TYPE NUMBER RI VIH TD62551S 2.7 kΩ 3V TD62553S 0Ω 3V TD62554S 0Ω 10 V TD62555S 0Ω 14 V PRECAUTIONS for USING This IC does not integrate protection circuits such as overcurrent and overvoltage protectors. Thus, if excess current or voltage is applied to the IC, the IC may be damaged. Please design the IC so that excess current or voltage will not be applied to the IC. Utmost care is necessary in the design of the output line, VCC and GND line since IC may be destroyed due to short−circuit between outputs, air contamination fault, or fault by improper grounding. 3 2001-07-04 TD62551,553~555S PACKAGE DIMENSIONS SIP9−P−300−2.54A Unit: mm Weight: 0.92 g (Typ.) 4 2001-07-04 TD62551,553~555S RESTRICTIONS ON PRODUCT USE 000707EBA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 5 2001-07-04