TOSHIBA 2SB906_07

2SB906
TOSHIBA Transistor
Silicon PNP Diffused Type (PCT process)
2SB906
Audio Frequency Power Amplifier Application
•
Low collector saturation voltage
•
High power dissipation: PC = 20 W (Tc = 25°C)
•
Complementary to 2SD1221
Unit: mm
: VCE (sat) = −1.0 V (typ.) (IC = −3 A, IB = −0.3 A)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
−60
V
Collector-emitter voltage
VCEO
−60
V
Emitter-base voltage
VEBO
−7
V
Collector current
IC
−3
A
Base current
IB
−0.5
A
Collector power
dissipation
Ta = 25°C
Tc = 25°C
Junction temperature
Storage temperature range
PC
1.0
20
W
Tj
150
°C
Tstg
−55 to 150
°C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/Derating Concept and Methods) and individual
reliability data (i.e. reliability test report and estimated failure rate,
etc).
JEDEC
―
JEITA
―
TOSHIBA
2-7B1A
Weight: 0.36 g (typ.)
JEDEC
―
JEITA
―
TOSHIBA
2-7J1A
Weight: 0.36 g (typ.)
1
2006-11-21
2SB906
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = −60 V, IE = 0
―
―
−100
μA
Emitter cut-off current
IEBO
VEB = −7 V, IC = 0
―
―
−100
μA
V (BR) CEO
IC = −50 mA, IB = 0
−60
―
―
V
VCE = −5 V, IC = −0.5 A
60
―
200
hFE (2)
VCE = −5 V, IC = −3 A
20
―
―
VCE (sat)
IC = −3 A, IB = −0.3 A
―
−1.0
−1.7
V
Collector-emitter breakdown voltage
hFE (1)
(Note)
DC current gain
Collector-emitter saturation voltage
Base-emitter voltage
VBE
VCE = −5 V, IC = −0.5 A
―
−1.0
−1.5
V
Transition frequency
fT
VCE = −5 V, IC = −0.5 A
―
9
―
MHz
VCB = −10 V, IE = 0, f = 1 MHz
―
90
―
pF
―
0.4
―
―
1.7
―
―
0.5
―
Cob
Turn-on time
ton
20 μs
Storage time
tstg
Fall time
IB2
IB1
Switching time
INPUT
IB1
IB2
OUTPUT
15 Ω
Collector output capacitance
μs
VCC = −30 V
tf
−IB1 = IB2 = 0.2 A, DUTY CYCLE ≤ 1%
Note: hFE (1) classification O: 60 to 120, Y: 100 to 200
Marking
B906
Part No. (or abbreviation code)
Lot No.
Characteristics
indicator
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2
2006-11-21
2SB906
IC – VCE
hFE – IC
1000
−4
Common emitter
Common emitter
−70
−80
−3
DC current gain hFE
Collector current IC
(A)
Tc = 25°C
−60
−50
−40
−30
−2
−20
IB = −10 mA
500
300
25
−25
100
50
−1
30
−0.03
−0.1
−1
−2
−3
Collector-emitter voltage
−4
−3
(A)
VCE (V)
VCE (sat) – IC
IC – VBE
−3.0
Common emitter
Common emitter
IC/IB = 10
−2.5
VCE = −5 V
(A)
−0.5
−0.3
Collector current IC
Collector-emitter saturation voltage
VCE (sat) (V)
−1
−5
−1
Tc = 100°C
−0.1
25
−0.05
−25
−0.02
−0.3
Collector current IC
0
0
0
VCE = −5 V
Tc = 100°C
−2.0
−1.5
Tc = 100°C
25
−25
−1.0
−0.5
−0.03
−0.1
−0.3
Collector current IC
−1
−3
0
0
(A)
−0.2
−0.4
−0.8
−0.6
Base-emitter voltage
−1.0
−1.2
VBE (V)
Safe Operating Area
−10
PC – Ta
IC max (pulsed)*
24
(1)
(A)
(2) Ceramic substrate
50 × 50 × 0.8 mm
(3) No heat sink
Collector current IC
Collector power dissipation
PC (W)
(1) Tc = Ta infinite heat sink
20
16
12
8
4
−3
10 ms*
IC max (continuous)
1 ms*
DC operation
Tc = 25°C
−1
−0.5
−0.3
(2)
*: Single nonrepetitive pulse
Tc = 25°C
Curves must be derated linearly
with increase in temperature.
(3)
0
0
100 ms*
−5
25
50
75
100
125
150
−0.1
−1
175
Ambient temperature Ta (°C)
−3
−10
Collector-emitter voltage
3
VCEO max
−30
−100
VCE (V)
2006-11-21
2SB906
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
4
2006-11-21