FAIRCHILD NC7SVL04FHX

NC7SVL04
TinyLogic® Low-ICCT Inverter
Features
Description
ƒ
ƒ
The NC7SVL04 is a single inverter with a low-ICCT input
design from Fairchild’s Ultra-Low Power (ULP-A) series
®
of TinyLogic . The NC7SVL04 features very low
quiescent current, even when the input voltage is lower
than the VCC supply. This feature services mobile
handset applications very well, allowing for direct
interface with baseband processor general-purpose
I/Os. Since mobile devices rely on a battery supply, the
NC7SVL04 facilitates lower power consumption in
mixed-voltage rail environments.
0.9V to 3.6V VCC Supply Operation
3.6V Over-Voltage Tolerant I/Os at VCC from 0.9V
to 3.6V
ƒ
ƒ
Power-Off High Impedance Inputs and Outputs
ƒ
ƒ
Ultra-Small MicroPak™ Package
Proprietary Quiet Series™ Noise / EMI Reduction
Circuitry
Ultra-Low Dynamic Power
This product is designed on an advanced CMOS
technology for a wide low-voltage operating range (0.9V
to 3.6V VCC), high drive needs (up to 24mA), and speed
(maximum propagation delay of 3.5ns, VCC=3.3V). It
achieves this performance while maintaining low CMOS
power dissipation.
Ordering Information
Part Number
Top Mark
Eco Status
Package
Packing Method
NC7SVL04P5X
L04
RoHS
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3000 Units on
Tape & Reel
NC7SVL04L6X
CD
RoHS
6-Lead MicroPak™, 1.00mm Wide
5000 Units on
Tape & Reel
NC7SVL04FHX
CD
Green
6-Lead, MicroPak2, 1x1mm Body, .35mm
Pitch
5000 Units on
Tape & Reel
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
www.fairchildsemi.com
NC7SVL04 — TinyLogic® Low-ICCT Inverter
September 2009
NC7SVL04 — TinyLogic® Low-ICCT Inverter
Connection Diagram
IEEE/IEC
Figure 1. Logic Symbol
Pin Configurations
Figure 2. SC70 (Top View)
Figure 3. MicroPak™ (Top Through View)
Pin Definitions
Pin # SC70
Pin # MicroPak
Name
Description
1
1
NC
2
2
A
3
3
GND
Ground
4
4
Y
Output
5
6
VCC
Supply Voltage
5
NC
No Connect
No Connect
Input
Function Table
Y=/A
Inputs
Output
A
Y
L
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
Supply Voltage
-0.5
4.6
V
VIN
DC Input Voltage
-0.5
4.6
V
-0.5
VCC + 0.5
-0.5
4.6
VOUT
DC Output Voltage
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IOH / IOL
HIGH or LOW State
(1)
VCC = 0V
VIN < 0V
-50
VOUT < 0V
-50
VOUT > VCC
+50
DC Output Source/Sink Current
ICC or IGND DC VCC or Ground Current per Supply Pin
TSTG
-65
mA
mA
±50
mA
±50
mA
+150
°C
TJ
Junction Temperature Under Bias
+150
°C
TL
Junction Lead Temperature, Soldering 10 Seconds
+260
°C
PD
Power Dissipation at +85°C
ESD
Storage Temperature Range
V
SC70-5
150
MicroPak-6
130
MicroPak2-6
120
Human Body Model, JEDEC:JESD22-A114
4000
Charge Device Model, JEDEC:JESD22-C101
2000
NC7SVL04 — TinyLogic® Low-ICCT Inverter
Absolute Maximum Ratings
mW
V
Note:
1. IO absolute maximum ratings must be observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
VCC
Supply Voltage
VIN
Input Voltage
VOUT
IOH/IOL
TA
Δt/ΔV
θJA
Output Voltage
Output Current in IOH/IOL
Conditions
Thermal Resistance
Max.
Unit
0.9
3.6
V
V
0
3.6
VCC = 0V
0
3.6
HIGH or LOW State
0
VCC
VCC = 3.0V to 3.6V
±24.0
VCC = 2.3V to 2.7V
±18.0
VCC = 1.65V to 1.95V
±6.0
VCC = 1.4V to 1.6V
±4.0
VCC = 1.1V to 1.3V
±2.0
VCC = 0.9V
±0.1
Operating Temperature, Free Air
Minimum Input Edge Rate
Min.
-40
VIN = 0.8V to 2.0V, VCC = 3.0V
V
mA
+85
°C
10
ns/V
SC70-5
425
MicroPak-6
500
MicroPak2-6
560
°C/W
Note:
2. Unused inputs must be held HIGH or LOW. They may not float.
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
www.fairchildsemi.com
3
Symbol
VIH
VIL
Parameter
HIGH Level Input
Voltage
LOW Level Input
Voltage
VCC
Conditions
TA=25°C
Min.
Min.
.65 x VCC
.65 x VCC
1.10 ≤ VCC ≤ 1.30
.65 x VCC
.65 x VCC
1.40 ≤ VCC ≤ 1.60
.65 x VCC
.65 x VCC
1.65 ≤ VCC ≤ 1.95
0.90
.0.90
2.30 ≤ VCC ≤ 2.70
1.50
1.50
2.70 ≤ VCC ≤ 3.60
1.50
1.50
Max.
0.90
.25 x VCC
.25 x VCC
.25 x VCC
.25 x VCC
1.40 ≤ VCC ≤ 1.60
.25 x VCC
.25 x VCC
1.65 ≤ VCC ≤ 1.95
.25 x VCC
.25 x VCC
2.30 ≤ VCC ≤ 2.70
0.70
0.70
0.80
VCC-0.10
VCC-0.10
1.10 ≤ VCC ≤ 1.30
VCC-0.10
VCC-0.10
1.40 ≤ VCC ≤ 1.60
VCC-0.20
VCC-0.20
VCC-0.20
VCC-0.20
2.30 ≤ VCC ≤ 2.70
VCC-0.20
VCC-0.20
2.70 ≤ VCC ≤ 3.60
VCC-0.20
VCC-0.20
1.10 ≤ VCC ≤ 1.30 IOH=-2mA
.75 x VCC
.75 x VCC
1.40 ≤ VCC ≤ 1.60 IOH=-4mA
.75 x VCC
.75 x VCC
1.25
1.25
2.00
2.00
1.80
1.80
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
2.30 ≤ VCC ≤ 2.70
2.70≤ VCC ≤ 3.60
2.30 ≤ VCC ≤ 2.70
2.70 ≤ VCC ≤ 3.60
IOH=-6mA
IOH=-12mA
IOH=-18mA
2.70 ≤ VCC ≤ 3.60 IOH=-24mA
2.20
2.20
1.70
1.70
2.40
2.40
2.20
V
0.80
0.90
IOH=-100µA
Units
V
1.10 ≤ VCC ≤ 1.30
1.65 ≤ VCC ≤ 1.95
HIGH Level Output
Voltage
Max.
0.90
2.70 ≤ VCC ≤ 3.60
VOH
TA=-40 to +85°C
NC7SVL04 — TinyLogic® Low-ICCT Inverter
DC Electrical Characteristics
V
2.20
Continued on the following page…
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
www.fairchildsemi.com
4
Symbol
Parameter
VCC
LOW Level
Output Voltage
Min.
0.10
0.10
1.40 ≤ VCC ≤ 1.60
0.20
0.20
0.20
0.20
IOL=100µA
ICC
Quiescent
Supply Current
ICCT
Increase in ICC
per Input
Units
2.30 ≤ VCC ≤ 2.70
0.20
0.20
2.70 ≤ VCC ≤ 3.60
0.20
0.20
1.10 ≤ VCC ≤ 1.30 IOL=2mA
0.25 x VCC
0.25 x VCC
1.40 ≤ VCC ≤ 1.60 IOL=4mA
0.25 x VCC
0.25 x VCC
1.65 ≤ VCC ≤ 1.95 IOL=6mA
0.30
0.30
2.30 ≤ VCC ≤ 2.70
0.40
0.40
0.40
0.40
0.60
0.60
0.40
0.40
0.55
0.55
0 ≤ VIN ≤ 3.60V
±0.1
±0.5
µA
0 ≤ (VIN, VO) ≤ 3.60V
0.5
0.5
µA
VIN=VCC or GND
0.9
0.9
IOL=12mA
IOL=18mA
2.70 ≤ VCC ≤ 3.60 IOL=24mA
Power Off
Leakage
Current
Max.
1.10 ≤ VCC ≤ 1.30
2.70 ≤ VCC ≤ 3.60
IOFF
Min.
0.10
2.30 ≤ VCC ≤ 2.70
IIN
Max.
0.10
2.70 ≤ VCC ≤ 3.60
Input Leakage
Current
TA=-40 to 85°C
0.90
1.65 ≤ VCC ≤ 1.95
VOL
TA=25°C
Conditions
0.90 to 3.60
0
0.90 to 3.60
VCC ≤ VIN ≤ 3.60V
±0.9
1.95
VIN=0.9V
6
8
3.60
VIN=1.5V
6
8
V
NC7SVL04 — TinyLogic® Low-ICCT Inverter
DC Electrical Characteristics (Continued)
µA
µA
AC Electrical Characteristics
Symbol
Parameter
VCC
0.90
1.10 ≤ VCC ≤ 1.30
tPHL, tPLH
Propagation
Delay
1.40 ≤ VCC ≤ 1.60
TA=25°C
Conditions
Min.
1.65 ≤ VCC ≤ 1.95
2.30 ≤ VCC ≤ 2.70
2.70 ≤ VCC ≤ 3.60
CIN
Input
Capacitance
0
CPD
Power
Dissipation
Capacitance
0.90 to 3.60
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
CL=30pF,
RL=500Ω
VIN=0V or VCC,
f=10MHz
Max.
Min.
Max.
16.5
3.0
27.8
Units Figure
34.0
CL=15pF, RL=1MΩ
CL=15pF, RL=2kΩ
Typ.
TA=-40 to 85°C
3.5
8.1
1.5
3.7
7.0
1.5
7.5
1.1
2.8
5.8
1.0
6.3
0.6
2.0
4.0
0.6
4.5
0.5
1.5
3.5
0.5
4.0
ns
3
pF
5
pF
Figure 4
Figure 5
www.fairchildsemi.com
5
NC7SVL04 — TinyLogic® Low-ICCT Inverter
AC Loadings and Waveforms
Figure 4. AC Test Circuit
Figure 5. AC Waveforms
VCC
Symbol
3.3V ± 0.3V
2.5V ± 0.2V
1.8V ± 0.15V
1.5V ± 0.1V
1.2V ± 0.1V
0.9V
Vmi
1.5V
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
Vmo
1.5V
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
www.fairchildsemi.com
6
NC7SVL04 — TinyLogic® Low-ICCT Inverter
Physical Dimensions
Figure 6. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf.
Package Designator
P5X
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
7
NC7SVL04 — TinyLogic® Low-ICCT Inverter
Physical Dimensions
2X
0.05 C
1.45
B
2X
(1)
0.05 C
(0.49)
5X
1.00
(0.75)
(0.52)
1X
A
TOP VIEW
0.55MAX
(0.30)
6X
PIN 1
0.05 C
0.05
0.00
RECOMMENED
LAND PATTERN
0.05 C
C
1.0
DETAIL A
0.10
0.05
0.45
0.35
0.10
0.00 6X
0.25
0.15 6X
C B A
C
0.40
0.30
0.35 5X
0.25
0.40 5X
0.30
0.5
(0.05)
6X
BOTTOM VIEW
DETAIL A
PIN 1 TERMINAL
0.075 X 45
CHAMFER
(0.13)
4X
Notes:
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
2. DIMENSIONS ARE IN MILLIMETERS
3. DRAWING CONFORMS TO ASME Y14.5M-1994
MAC06AREVC
Figure 7. 6-Lead, MicroPak™, 1.0mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator
L6X
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
8
NC7SVL04 — TinyLogic® Low-ICCT Inverter
Physical Dimensions
DETAIL A
5X
Figure 8. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.
Package Designator
FHX
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
9
NC7SVL04 — TinyLogic® Low-ICCT Inverter
© 2008 Fairchild Semiconductor Corporation
NC7SVL04 • Rev. 1.0.3
www.fairchildsemi.com
10