SPICE MODEL: SBR0220LP SBR0220LP 0.2A SBR® Super Barrier Rectifier NEW PRODUCT Features • • • • • • • Mechanical Data • • Low Leakage Current Patented Super Barrier Rectifier Technology Excellent High Temperature Stability Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) “Green” Molding Compound (No Br, Sb) • • • • • • Case: DFN1006-2 Case Material: Molded Plastic, “Green” Molding compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Polarity Indicator: Cathode Dot Terminals: Finish - NiPdAu annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.001 grams (Approx.) Maximum Ratings @ TA = 25ºC unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Maximum Thermal Resistance Thermal Resistance Junction to Soldering (Note 2) Thermal Resistance Junction to Ambient (Note 3) Operating and Storage Temperature Range Symbol VRRM VRWM VRM VR(RMS) IO Value Unit 20 V 14 0.2 V A IFSM 5.0 A RӨJS RӨJA 17 304 ºC/W -65 to +150 ºC TJ, TSTG Electrical Characteristics @ TA = 25ºC unless otherwise specified Characteristic Symbol Min Typ Max Unit Reverse Breakdown Voltage (Note 4) V(BR)R 20 - - V IR = 400 µA 0.42 0.33 0.48 0.41 V IF = 0.1A, TJ = 25ºC IF = 0.1A, TJ = 150ºC IF = 0.2A, TJ = 25ºC IF = 0.2A, TJ = 150ºC 50 1.3 µA mA VR = 20V, TJ = 25ºC VR = 20V, TJ = 150ºC Forward Voltage Drop VF - 0.38 0.30 0.44 0.38 Leakage Current (Note 4) IR - 2 0.43 Notes: Test Condition 1. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. 2. Theoretical RӨJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. 3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Short duration pulse test used to minimize self-heating effect. __________ SBR is a registered trademark of Diodes Incorporated. SBR0220LP Rev. 3 - 2 1 of 4 www.diodes.com May 2007 © Diodes Incorporated NEW PRODUCT SBR0220LP IF(AV), AVERAGE FORWARD CURRENT(A) 0.25 Note 3 0.2 0.15 0.1 0.05 0 0 Fig. 3 Typical Total Capacitance 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 4 Forward Current Derating Curve 200 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) 0.4 0.3 TJ =150°C 0.2 0.1 0 0 0.1 0.2 0.3 0.4 0.5 0.6 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation SBR0220LP Rev. 3 - 2 2 of 4 www.diodes.com May 2007 © Diodes Incorporated SBR0220LP Package Outline Drawing NEW PRODUCT TOP VIEW Cathode Indicator DFN1006-2 G H A R B C Dim Min Max Typ A 0.95 1.075 1.00 B 0.55 0.675 0.60 C 0.45 0.55 0.50 D 0.20 0.30 0.25 G 0.47 0.53 0.50 H 0 N ⎯ R D N 0.05 0.03 ⎯ 0.40 0.05 0.15 0.10 All Dimensions in mm SBR0220LP Marking, Polarity, Weight & Ordering Information Case Style Marking (DFN1006-2) Weight 22 Top View SBR0220LP Rev. 3 - 2 0.001g (approx.) Back View Ordering Information Date Code SBR0220LP-7 3000/Tape & Reel 22 = Product Type Marking Code Dot Denotes Cathode Side 3 of 4 www.diodes.com May 2007 © Diodes Incorporated SBR0220LP NEW PRODUCT Suggested Pad Layout IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR0220LP Rev. 3 - 2 4 of 4 www.diodes.com May 2007 © Diodes Incorporated