SPICE MODEL: SBR140S3 SBR140S3 1A SBR® Super Barrier Rectifier NEW PRODUCT Features • • • • • • • • • • Mechanical Data Low Forward Voltage Drop Low Reverse Leakage Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Super Barrier Design Soft, fast switching capability 150ºC Operating Junction Temperature Molded Plastic SOD-323 Lead Free/RoHS Compliant (Note 1) “Green” Device (Note 3) • • • • • • Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Matte Tin Finish annealed over Alloy 42 leadframe. Solderable per MIL-STD-202, Method 208 Marking: See Page 3 Ordering Information: See Page 3 Maximum Ratings @ TA = 25ºC unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current TC=65°C Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Maximum Thermal Resistance Thermal Resistance Junction to Ambient (Note 2) Thermal Resistance Junction to Ambient (Note 5) Value Unit VRRM VRWM VRM 40 V VR(RMS) 28 V IO 1 A IFSM 20 A RθJA 473 407 °C/W -65 to +150 ºC RθjA Operating and Storage Temperature Range Tj, TSTG Electrical Characteristics @ TA = 25ºC unless otherwise specified Characteristic Symbol Min Typ Max Unit Reverse Breakdown Voltage (Note 4) V(BR)R 40 - - V - 0.41 0.35 0.46 0.42 0.45 0.38 0.49 0.45 V 8 3 10 4 15 9 30 12 µA mA µA mA Forward Voltage Drop Leakage Current (Note 4) VF IR - Test Condition IR = 200 µA IF = 700mA, Tj = 25ºC IF = 700mA, Tj = 150ºC IF = 1A, Tj = 25ºC IF = 1A, Tj = 150ºC VR = 10V, Tj = 25 ºC VR = 10V, Tj = 150 ºC VR = 40V, Tj = 25 ºC VR = 40V, Tj = 150 ºC Notes: 1. 2. 3. 4. 5. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Diodes Inc.’s “Green” policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Short duration pulse test used to minimize self-heating effect. Polymide PCB, 2 oz. Copper, minimum recommended pad layout pad layout per http://www.diodes.com/datasheets/ap02001.pdf. ________ SBR is a registered trademark of Diodes Incorporated. SBR140 Rev. 2 - 2 1 of 3 www.diodes.com June 2007 © Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (mA) NEW PRODUCT SBR140S3 10000 1000 100 10 1 0.1 0 0.2 0.4 0.6 0.8 Fig.1 Typical Forward Characteristics Package Outline Drawing SOD-323 Dim Min Max A 2.30 2.70 B 1.60 1.80 C 1.20 1.40 D 1.00 1.10 E 0.25 0.35 G 0.20 0.40 H 0.10 0.15 J 0.05 Typical α 0° 8° All Dimensions in mm SBR140 Rev. 2 - 2 2 of 3 www.diodes.com June 2007 © Diodes Incorporated SBR140S3 Marking, Polarity, Weight & Ordering Information SBR140S3 NEW PRODUCT Case Style Marking D4 Weight 0.004g (approx.) Ordering Information Marking Code SBR140S3-7 3,000 pieces/Tape and Reel D4 = Product Type Marking Code IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR140 Rev. 2 - 2 3 of 3 www.diodes.com June 2007 © Diodes Incorporated