SBL2030PT - SBL2060PT 20A SCHOTTKY BARRIER RECTIFIER SPICE MODELS: SBL2030PT SBL2035PT SBL2040PT SBL2045PT SBL2050PT SBL2060PT Features · · · · · · Schottky Barrier Chip · Lead Free Finish, RoHS Compliant (Note 3) TO-3P Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop A B H For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application J S C K R Mechanical Data · · Case: TO-3P P Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 N · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Polarity: As Marked on Body L Q G D Terminals: Finish ¾ Bright Tin. Plated Leads Solderable per MIL-STD-202, Method 208 E M M Ordering Information: See Last Page Marking: Type Number Weight: 5.6 grams (approximate) Dim Min Max A 1.88 2.08 B 4.68 5.36 C 20.63 22.38 D 18.5 21.5 E 2.1 2.4 G 0.51 0.76 H 15.38 16.25 J 1.90 2.70 K 2.9Æ 3.65Æ 4.50 L 3.78 M 5.2 5.7 N 0.89 1.53 2.46 P 1.82 Q 2.92 3.23 R 11.70 12.84 S ¾ 6.10 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SBL Symbol 2030PT Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TC = 100°C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage Drop @ IF = 10A, TC = 25°C Peak Reverse Current at Rated DC Blocking Voltage @ TC = 25°C @ TC = 100°C Typical Total Capacitance (Note 2) Typical Thermal Resistance Junction to Case (Note 1) Operating and Storage Temperature Range Notes: SBL 2035PT SBL 2040PT SBL 2045PT SBL 2050PT SBL 2060PT Unit VRRM VRWM VR 30 35 40 45 50 60 V VR(RMS) 21 24.5 28 31.5 35 42 V IO 20 A IFSM 250 A VFM 0.55 0.75 V IRM 1.0 50 CT 1100 pF RqJC 2.5 °C/W Tj, TSTG -65 to +150 °C mA 1. Thermal resistance junction to case mounted on heatsink. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS23047 Rev. 4 - 2 1 of 3 www.diodes.com SBL2030PT - SBL2060PT ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE RECTIFIED CURRENT (A) 20 16 12 8 4 0 0 50 100 100 SBL2030PT - SBL20450PT 10 SBL2050PT - SBL2060PT 1.0 0.1 150 0.1 0.3 0.5 0.7 0.9 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics per Element 300 4000 8.3 ms single half-sine-wave JEDEC method Tj = 25°C f = 1MHz 250 CT, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 200 150 100 1000 50 0 1 10 100 100 0.1 IR, INSTANTANEOUS REVERSE CURRENT (mA) NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Forward Surge Current 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance per Element 100 Tj = 100°C 10 Tj = 75°C 1.0 Tj = 25°C 0.1 0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics per Element DS23047 Rev. 4 - 2 2 of 3 www.diodes.com SBL2030PT - SBL2060PT Ordering Information Notes: (Note 4) Device Packaging Shipping SBL2030PT TO-3P 30/Tube SBL2035PT TO-3P 30/Tube SBL2040PT TO-3P 30/Tube SBL2045PT TO-3P 30/Tube SBL2050PT TO-3P 30/Tube SBL2060PT TO-3P 30/Tube 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. DS23047 Rev. 4 - 2 3 of 3 www.diodes.com SBL2030PT - SBL2060PT