FAIRCHILD H11AA2SM

AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
H11AA4-M
PACKAGE
SCHEMATIC
1
6 BASE
2
5 COLL
3
4 EMITTER
DESCRIPTION
The H11AAX-M series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single
silicon phototransistor output.
FEATURES
•
•
•
•
Bi-polar emitter input
Built-in reverse polarity input protection
Underwriters Laboratory (UL) recognized File #E90700, Volume 2
VDE approved File #102497 (ordering option ‘V’)
APPLICATIONS
• AC line monitor
• Unknown polarity DC sensor
• Telephone line interface
© 2004 Fairchild Semiconductor Corporation
Page 1 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
H11AA4-M
ABSOLUTE MAXIMUM RATINGS (TA =25°C Unless otherwise specified)
Parameter
Symbol
Device
Value
Units
TOTAL DEVICE
Storage Temperature
TSTG
All
-40 to +150
°C
Operating Temperature
TOPR
All
-40 to +100
°C
Lead Solder Temperature
TSOL
All
260 for 10 sec
°C
250
mW
2.94
mW/°C
Total Device Power Dissipation
Derate Linearly From 25°C
PD
All
EMITTER
Continuous Forward Current
IF
All
60
mA
IF(pk)
All
±1.0
A
PD
All
Continuous Collector Current
IC
All
Detector Power Dissipation
Derate linearity from 25°C
PD
All
Forward Current – Peak (1 µs pulse, 300 pps)
LED Power Dissipation
Derate Linearly From 25°C
120
mW
1.41
mW/°C
50
mA
DETECTOR
150
mW
1.76
mW/°C
ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.)
INDIVIDUAL COMPONENT CHARACTERISTICS
Parameter
Test Conditions
Symbol
Device
IF = ±10 mA
VF
VF = 0 V, f = 1.0 MHz
Breakdown Voltage
Collector to Emitter
Min
Typ*
Max
Unit
All
1.17
1.5
V
CJ
All
80
pF
IC = 1.0 mA, IF = 0
BVCEO
All
30
100
V
Collector to Base
IC = 100 µA, IF = 0
BVCBO
All
70
120
V
Emitter to Base
IE = 100 µA, IF = 0
BVEBO
All
5
10
V
Emitter to Collector
IE = 100 µA, IF = 0
BVECO
All
7
10
V
VCE = 10 V, IF = 0
ICEO
Collector to Emitter
VCE = 0, f = 1 MHz
Collector to Base
Emitter to Base
EMITTER
Input Forward Voltage
Capacitance
DETECTOR
Leakage Current
Collector to Emitter
H11AA1,3,4(-M)
1
50
H11AA2-M
1
200
CCE
All
10
pF
VCB = 0, f = 1 MHz
CCB
All
80
pF
VEB = 0, f = 1 MHz
CEB
All
15
pF
nA
Capacitance
*Typical values at TA = 25°C
© 2004 Fairchild Semiconductor Corporation
Page 2 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
H11AA4-M
TRANSFER CHARACTERISTICS (TA = 25°C Unless otherwise specified.)
Characteristics
Current Transfer Ratio,
Collector to Emitter
Current Transfer Ratio,
Symmetry
Saturation Voltage
Collector to Emitter
Test Conditions
Symbol
IF = ±10 mA, VCE = 10 V
CTRCE
IF = ±10 mA, VCE = 10 V (Figure 11)
IF = ±10 mA, ICE = 0.5 mA
Device
Min
H11AA4-M
100
H11AA3-M
50
H11AA1-M
20
H11AA2-M
10
All
.33
Typ*
Max
Units
%
3.0
VCE(SAT)
All
.40
V
Test Conditions
Symbol
Min
Package Capacitance input/output
VI-O = 0, f = 1 MHz
CI-O
Isolation Voltage
f = 60 Hz, t = 1 sec.
VISO
7500
Vac(pk)
VI-O = 500 VDC
RISO
1011
Ω
ISOLATION CHARACTERISTICS
Characteristic
Isolation Resistance
Typ*
0.7
Max
Units
pF
*Typical values at TA = 25°C
© 2004 Fairchild Semiconductor Corporation
Page 3 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
Fig. 2 Normalized CTR vs. Forward Current
Fig. 1 Input Voltage vs. Input Current
100
1.4
TA = 25°C
TA = 25°C
VCE = 5V
80
1.2
Normalized to IF = 10mA
60
1.0
40
NORMALIZED CTR
I F - INPUT CURRENT (mA)
H11AA4-M
20
0
-20
-40
0.8
0.6
0.4
-60
0.2
-80
0.0
-100
-2.0
-1.5
-1.0
-0.5
0.0
0.5
1.0
1.5
0
2.0
5
20
1.0
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
VCE = 5V
Normalized to IF = 10mA, TA = 25°C
1.2
IF = 10mA
NORMALIZED CTR
15
Fig. 4 CTR vs. RBE (Unsaturated)
Fig. 3 Normalized CTR vs. Ambient Temperature
1.4
1.0
IF = 5mA
0.8
IF = 20mA
0.6
0.4
0.2
-60
-40
-20
0
20
40
60
80
V
0.9
CE
= 5V
TA = 25°C
0.8
0.7
IF = 20mA
0.6
IF = 10mA
0.5
IF = 5mA
0.4
0.3
0.2
0.1
0.0
100
10
100
1.0
V
CE
= 0.3V
TA = 25°C
0.8
0.7
IF = 20mA
0.6
IF = 10mA
0.5
IF = 5mA
0.4
0.3
0.2
0.1
0.0
10
100
RBE- BASE RESISTANCE (k Ω)
© 2004 Fairchild Semiconductor Corporation
1000
VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)
Fig. 6 Collector-Emitter Saturation Voltage vs Collector Current
Fig. 5 CTR vs. RBE (Saturated)
0.9
1000
RBE - BASE RESISTANCE (kΩ)
TA - AMBIENT TEMPERATURE (°C)
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
10
IF - FORWARD CURRENT (mA)
VF - INPUT VOLTAGE (V)
100
T = 25°C
A
10
1
IF = 2.5mA
IF = 5mA
0.1
IF = 10mA
0.01
0.001
0.01
Page 4 of 9
0.1
IF = 20mA
1
10
IC - COLLECTOR CURRENT (mA)
1/9/04
AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
Fig. 7 Switching Speed vs. Load Resistor
Fig. 8 Normalized ton vs. RBE
1000
7
SWITCHING SPEED - (µs)
A
100
Toff
Tf
10
Ton
Tr
1
VCC = 10V
IC = 2mA
RL = 100Ω
T = 25°C
6
NORMALIZED ton - (ton(RBE) / ton(open))
IF = 10mA
VCC = 10V
T = 25°C
A
5
4
3
2
1
0
0.1
0.1
1
10
10
100
100
1000
10000
100000
RBE- BASE RESISTANCE (k Ω)
R-LOAD RESISTOR (kΩ)
Fig. 10 Dark Current vs. Ambient Temperature
Fig. 9 Normalized toff vs. RBE
10000
3.0
VCC = 10V
IC = 2mA
RL = 100Ω
T = 25°C
2.5
ICEO - COLLECTOR -EMITTER DARK CURRENT (nA)
NORMALIZED toff - (toff(RBE) / toff(open))
H11AA4-M
A
2.0
1.5
1.0
0.5
1000
100
VCE = 10V
VCE = 30V
10
1
0.1
0.0
10
100
1000
10000
0
100000
20
40
60
80
100
TA - AMBIENT TEMPERATURE (°C)
RBE- BASE RESISTANCE (kΩ)
Fig. 11 Output Symmetry Characteristics
10
NORMALIZED OUTPUT CURRENT
5
1
IF =
I - 10mA I
IF =
I 10mA I
.5
NORMALIZED TO:
VCE = 10 V
IF = 10 mA
.1
.05
THE MAXIMUM PEAK
OUTPUT CURRENT
WILL BE NO MORE
THAN THREE TIMES
THE MINIMUM PEAK
OUTPUT CURRENT AT
IF = ±10 mA
.01
.005
.01
.05
.1
.5
1
5
10
VCE - COLLECTOR TO EMITTER VOLTAGE (V)
© 2004 Fairchild Semiconductor Corporation
Page 5 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
Package Dimensions (Through Hole)
H11AA4-M
Package Dimensions (Surface Mount)
0.350 (8.89)
0.320 (8.13)
0.350 (8.89)
0.320 (8.13)
0.260 (6.60)
0.240 (6.10)
0.070 (1.77)
0.040 (1.02)
0.260 (6.60)
0.240 (6.10)
0.390 (9.90)
0.332 (8.43)
0.070 (1.77)
0.040 (1.02)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.200 (5.08)
0.115 (2.93)
0.200 (5.08)
0.115 (2.93)
0.100 (2.54)
0.015 (0.38)
0.012 (0.30)
0.008 (0.20)
0.025 (0.63)
0.020 (0.51)
0.020 (0.50)
0.016 (0.41)
0.100 (2.54)
0.100 [2.54]
15°
0.035 (0.88)
0.006 (0.16)
0.020 (0.50)
0.016 (0.41)
0.012 (0.30)
Package Dimensions (0.4” Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
0.350 (8.89)
0.320 (8.13)
0.070 (1.78)
0.260 (6.60)
0.240 (6.10)
0.060 (1.52)
0.070 (1.77)
0.040 (1.02)
0.014 (0.36)
0.010 (0.25)
0.425 (10.79)
0.100 (2.54)
0.305 (7.75)
0.200 (5.08)
0.115 (2.93)
0.030 (0.76)
0.100 (2.54)
0.015 (0.38)
0.020 (0.50)
0.016 (0.41)
0.100 [2.54]
0.012 (0.30)
0.008 (0.21)
0.425 (10.80)
0.400 (10.16)
NOTE
All dimensions are in inches (millimeters)
© 2004 Fairchild Semiconductor Corporation
Page 6 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
H11AA4-M
ORDERING INFORMATION
Option/Order Entry Identifier
Description
S
Surface Mount Lead Bend
SR2
Surface Mount; Tape and Reel
T
0.4" Lead Spacing
V
VDE 0884
TV
VDE 0884, 0.4" Lead Spacing
SV
VDE 0884, Surface Mount
SR2V
VDE 0884, Surface Mount, Tape & Reel
MARKING INFORMATION
1
V
3
H11AA1
2
X YY Q
6
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One digit year code, e.g., ‘3’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
*Note – Parts that do not have the ‘V’ option (see definition 3 above) that are marked with
date code ‘325’ or earlier are marked in portrait format.
© 2004 Fairchild Semiconductor Corporation
Page 7 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
H11AA4-M
Carrier Tape Specifications
12.0 ± 0.1
4.5 ± 0.20
2.0 ± 0.05
4.0 ± 0.1
0.30 ± 0.05
Ø1.5 MIN
1.75 ± 0.10
11.5 ± 1.0
21.0 ± 0.1
9.1 ± 0.20
10.1 ± 0.20
0.1 MAX
24.0 ± 0.3
Ø1.5 ± 0.1/-0
User Direction of Feed
NOTE
All dimensions are in inches (millimeters)
Reflow Profile (White Package, -M Suffix)
Temperature (°C)
300
230°C, 10–30 s
250
245°C peak
200
150
Time above 183°C, 120–180 sec
100
Ramp up = 2–10°C/sec
50
• Peak reflow temperature: 245°C (package surface temperature)
• Time of temperature higher than 183°C for 120–180 seconds
• One time soldering reflow is recommended
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
© 2004 Fairchild Semiconductor Corporation
Page 8 of 9
1/9/04
AC INPUT/PHOTOTRANSISTOR
OPTOCOUPLERS
H11AA1-M
H11AA2-M
H11AA3-M
H11AA4-M
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
© 2004 Fairchild Semiconductor Corporation
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
Page 9 of 9
1/9/04
WWW.ALLDATASHEET.COM
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com