GB70LA60UF Vishay Semiconductors "Low Side Chopper" IGBT SOT-227 (Warp 2 Speed IGBT), 70 A FEATURES • NPT warp 2 speed IGBT technology with positive temperature coefficient • Square RBSOA • Low VCE(on) • FRED Pt® hyperfast rectifier • Fully isolated package SOT-227 • Very low internal inductance ( 5 nH typical) • Industry standard outline • UL approved file E78996 • Compliant to RoHS directive 2002/95/EC PRODUCT SUMMARY BENEFITS VCES 600 V IC DC 70 A at 88 °C VCE(on) typical at 70 A, 25 °C 2.4 V IF DC 70 A at 86 °C • Designed for increased operating efficiency in power conversion: UPS, SMPS, welding, induction heating • Easy to assemble and parallel • Direct mounting to heatsink • Plug-in compatible with other SOT-227 packages • Higher switching frequency up to 150 kHz • Lower conduction losses and switching losses • Low EMI, requires less snubbing ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Collector to emitter voltage VCES Continuous collector current IC TEST CONDITIONS MAX. UNITS 600 V TC = 25 °C 111 TC = 80 °C 76 Pulsed collector current ICM 120 Clamped inductive load current ILM 120 Diode continuous forward current IF TC = 25 °C 113 TC = 80 °C 75 Peak diode forward current IFM 200 Gate to emitter voltage VGE ± 20 Power dissipation, IGBT PD Power dissipation, diode RMS isolation voltage Document Number: 93104 Revision: 22-Jul-10 PD VISOL TC = 25 °C 447 TC = 80 °C 250 TC = 25 °C 236 TC = 80 °C 132 Any terminal to case, t = 1 min 2500 A V W For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] V www.vishay.com 1 GB70LA60UF Vishay Semiconductors "Low Side Chopper" IGBT SOT-227 (Warp 2 Speed IGBT), 70 A ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Collector to emitter breakdown voltage VBR(CES) Collector to emitter voltage VCE(on) Gate threshold voltage VGE(th) Temperature coefficient of threshold voltage VGE(th)/TJ Collector to emitter leakage current ICES Diode reverse breakdown voltage VBR Diode forward voltage drop VFM Diode reverse leakage current IRM Gate to emitter leakage current IGES TEST CONDITIONS MIN. TYP. MAX. VGE = 0 V, IC = 1 mA 600 - - VGE = 15 V, IC = 35 A - 1.69 1.88 VGE = 15 V, IC = 70 A - 2.23 2.44 VGE = 15 V, IC = 35 A, TJ = 125 °C - 2.07 2.31 UNITS V VGE = 15 V, IC = 70 A, TJ = 125 °C - 2.89 3.21 VCE = VGE, IC = 500 μA 3 3.9 5 VCE = VGE, IC = 1 mA (25 °C to 125 °C) - -9 - mV/°C VGE = 0 V, VCE = 600 V - 1 100 μA - 0.07 2.0 mA 600 - - V VGE = 0 V, VCE = 600 V, TJ = 125 °C IR = 1 mA IC = 35 A, VGE = 0 V - 1.8 2.33 IC = 70 A, VGE = 0 V - 2.13 2.71 IC = 35 A, VGE = 0 V, TJ = 125 °C - 1.35 1.81 IC = 70 A, VGE = 0 V, TJ = 125 °C - 1.7 2.32 VR = VR rated - 0.1 50 μA TJ = 125 °C, VR = VR rated - 0.01 3 mA VGE = ± 20 V - - ± 200 nA MIN. TYP. MAX. UNITS V SWITCHING CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Total gate charge (turn-on) Qg Gate to emitter charge (turn-on) Qge Gate to collector charge (turn-on) Qgc Turn-on switching loss Eon Turn-off switching loss Eoff Total switching loss Etot Turn-on switching loss Eon Turn-off switching loss Eoff Total switching loss Etot Turn-on delay time td(on) Rise time Fall time IC = 50 A, VCC = 400 V, VGE = 15 V IC = 70 A, VCC = 360 V, VGE = 15 V, Rg = 5 L = 500 μH, TJ = 25 °C IC = 70 A, VCC = 360 V, VGE = 15 V, Rg = 5 L = 500 μH, TJ = 125 °C Energy losses include tail and diode recovery (see fig. 18) - 320 - - 42 - - 110 - - 1.15 - - 1.16 - - 2.31 - - 1.27 - - 1.28 - - 2.55 - - 208 - - 69 - td(off) - 208 - tf - 100 - tr Turn-off delay time TEST CONDITIONS nC mJ ns TJ = 150 °C, IC = 120 A, Rg = 22 Reverse bias safe operating area RBSOA Fullsquare VGE = 15 V to 0 V, VCC = 400 V, VP = 600 V Diode reverse recovery time trr Diode peak reverse current Irr Diode recovery charge Qrr - Diode reverse recovery time trr - Diode peak reverse current Irr - Diode recovery charge Qrr - www.vishay.com 2 IF = 50 A, dIF/dt = 200 A/μs, VR = 200 V IF = 50 A, dIF/dt = 200 A/μs, VR = 200 V, TJ = 125 °C - 59 93 ns - 4 6 A 118 279 nC 130 159 ns 11 13 A 715 995 nC For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 93104 Revision: 22-Jul-10 GB70LA60UF "Low Side Chopper" IGBT SOT-227 (Warp 2 Speed IGBT), 70 A Vishay Semiconductors THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL MIN. TYP. MAX. UNITS TJ, TStg - 40 - 150 °C Maximum junction and storage temperature range - - 0.28 - - 0.53 - 0.05 - Mounting torque, 6-32 or M3 screw - - 1.3 Nm Weight - 30 - g IGBT Thermal resistance, junction to case RthJC Diode RthCS 160 200 140 175 120 150 100 125 IC (A) Allowable Case Temperature (°C) Thermal resistance, case to sink per module 80 60 °C/W TJ = 25 °C 100 TJ = 125 °C 75 40 50 20 25 0 0 20 40 60 80 100 0 120 0 1 2 3 4 5 IC - Continuous Collector Current (A) VCE (V) Fig. 1 - Maximum DC IGBT Collector Current vs. Case Temperature Fig. 3 - Typical IGBT Collector Current Characteristics 1 1000 100 0.1 ICES (mA) TJ = 125 °C IC (A) 10 1 0.01 0.001 0.1 TJ = 25 °C 0.01 1 10 100 1000 0.0001 100 200 300 400 500 600 VCE (V) VCES (V) Fig. 2 - IGBT Reverse Bias SOA TJ = 150 °C, VGE = 15 V Fig. 4 - Typical IGBT Zero Gate Voltage Collector Current Document Number: 93104 Revision: 22-Jul-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 GB70LA60UF Vishay Semiconductors "Low Side Chopper" IGBT SOT-227 (Warp 2 Speed IGBT), 70 A 4.5 200 175 TJ = 25 °C 4.0 125 3.5 IF (A) Vgeth (V) 150 3.0 100 TJ = 125 °C 75 TJ = 125 °C 50 TJ = 25 °C 2.5 25 0 2.0 0.0002 0.0004 0.0006 0.0008 0.001 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 IC (mA) VFM (V) Fig. 5 - Typical IGBT Threshold Voltage Fig. 8 - Typical Diode Forward Characteristics 4 1.50 1.25 100 A Energy (mJ) VCE (V) 3 70 A 2 1.00 0.75 0.50 Eoff 35 A 0.25 1 0.00 10 30 50 70 90 110 130 150 0 20 40 60 80 TJ (°C) IC (A) Fig. 6 - Typical IGBT Collector to Emitter Voltage vs. Junction Temperature, VGE = 15 V Fig. 9 - Typical IGBT Energy Loss vs. IC TJ = 125 °C, L = 500 μH, VCC = 360 V, Rg = 5 , VGE = 15 V 1000 160 140 Switching Time (ns) Allowable Case Temperature (°C) Eon 120 100 80 60 40 td(off) td(on) tf 100 tr 20 0 10 0 20 40 60 80 100 120 IF - Continuous Forward Current (A) Fig. 7 - Maximum DC Forward Current vs. Case Temperature www.vishay.com 4 0 10 20 30 40 50 60 70 80 IC (A) Fig. 10 - Typical IGBT Switching Time vs. IC TJ = 125 °C, L = 500 μH, VCC = 360 V, Rg = 5 , VGE = 15 V For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 93104 Revision: 22-Jul-10 GB70LA60UF "Low Side Chopper" IGBT SOT-227 (Warp 2 Speed IGBT), 70 A 170 Vishay Semiconductors 30 25 145 TJ = 125 °C 20 Irr (A) trr (ns) 120 95 70 TJ = 125 °C 15 10 TJ = 25 °C 5 45 20 100 TJ = 25 °C 0 100 1000 1000 dIF/dt (A/µs) dIF/dt (A/µs) Fig. 11 - Typical trr Diode vs. dIF/dt VR = 200 V, IF = 50 A Fig. 12 - Typical Irr Diode vs. dIF/dt VRR = 200 V, IF = 50 A 1250 1050 TJ = 125 °C Qrr (nC) 850 650 450 TJ = 25 °C 250 50 100 1000 dIF/dt (A/µs) Fig. 13 - Typical Qrr Diode vs. dIF/dt VR = 200 V, IF = 50 A ZthJC - Thermal Impedance Junction to Case (°C/W) 1 0.1 0.01 0.001 0.00001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 DC 0.0001 0.001 0.01 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 14 - Maximum Thermal Impedance ZthJC Characteristics (IGBT) Document Number: 93104 Revision: 22-Jul-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 GB70LA60UF Vishay Semiconductors "Low Side Chopper" IGBT SOT-227 (Warp 2 Speed IGBT), 70 A ZthJC - Thermal Impedance Junction to Case (°C/W) 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 DC 0.01 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 15 - Maximum Thermal Impedance ZthJC Characteristics (DIODE) R= L D.U.T. VCC ICM VC * 50 V 1000 V D.U.T. 1 2 + -V CC Rg * Driver same type as D.U.T.; VC = 80 % of Vce(max) * Note: Due to the 50 V power supply, pulse width and inductor will increase to obtain Id Fig. 16a - Clamped Inductive Load Test Circuit Fig. 16b - Pulsed Collector Current Test Circuit Diode clamp/ D.U.T. L - + -5V D.U.T./ driver + VCC Rg Fig. 17a - Switching Loss Test Circuit www.vishay.com 6 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 93104 Revision: 22-Jul-10 GB70LA60UF "Low Side Chopper" IGBT SOT-227 (Warp 2 Speed IGBT), 70 A Vishay Semiconductors 1 2 90 % 10 % 3 VC 90 % td(off) 10 % 5% IC tf tr td(on) t = 5 µs Eoff Eon Ets = (Eon + Eoff) Fig. 17b - Switching Loss Waveforms Test Circuit ORDERING INFORMATION TABLE Device code Document Number: 93104 Revision: 22-Jul-10 G B 70 L A 60 U F 1 2 3 4 5 6 7 8 1 - Insulated Gate Bipolar Transistor (IGBT) 2 - B = IGBT Generation 5 3 - Current rating (70 = 70 A) 4 - Circuit configuration (L = Low Side Chopper) 5 - Package indicator (A = SOT-227) 6 - Voltage rating (60 = 600 V) 7 - Speed/type (U = Ultrafast IGBT) 8 - F = F/W FRED Pt® diode For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 7 GB70LA60UF Vishay Semiconductors "Low Side Chopper" IGBT SOT-227 (Warp 2 Speed IGBT), 70 A CIRCUIT CONFIGURATION 4 3 2 1 LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95036 Packaging information http://www.vishay.com/doc?95037 www.vishay.com 8 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 93104 Revision: 22-Jul-10 Outline Dimensions Vishay Semiconductors SOT-227 DIMENSIONS in millimeters (inches) 38.30 (1.508) 37.80 (1.488) Chamfer 2.00 (0.079) x 45° 4 x M4 nuts Ø 4.40 (0.173) Ø 4.20 (0.165) -A3 4 6.25 (0.246) 12.50 (0.492) 25.70 (1.012) 25.20 (0.992) -B- 1 2 R full 7.50 (0.295) 15.00 (0.590) 30.20 (1.189) 29.80 (1.173) 8.10 (0.319) 4x 7.70 (0.303) 2.10 (0.082) 1.90 (0.075) 0.25 (0.010) M C A M B M 2.10 (0.082) 1.90 (0.075) -C- 12.30 (0.484) 11.80 (0.464) 0.12 (0.005) Notes • Dimensioning and tolerancing per ANSI Y14.5M-1982 • Controlling dimension: millimeter Document Number: 95036 Revision: 28-Aug-07 For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1