STMICROELECTRONICS 74VHC86M

74VHC86

QUAD EXCLUSIVE OR GATE
PRELIMINARY DATA
■
■
■
■
■
■
■
■
■
■
HIGH SPEED: tPD = 4.8 ns (TYP.) at VCC = 5V
LOW POWER DISSIPATION:
ICC = 2 µA (MAX.) at TA = 25 oC
HIGH NOISE IMMUNITY:
VNIH = VNIL = 28% VCC (MIN.)
POWER DOWN PROTECTION ON INPUTS
SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 8 mA (MIN)
BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
OPERATING VOLTAGE RANGE:
VCC (OPR) = 2V to 5.5V
PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 86
IMPROVED LATCH-UP IMMUNITY
LOW NOISE: VOLP = 0.8V (Max.)
DESCRIPTION
The 74VHC86 is an advanced high-speed CMOS
QUAD EXCLUSIVE OR GATE fabricated with
sub-micron silicon gate and double-layer metal
wiring C2MOS technology.
M
(Micro Package)
T
(TSSOP Package)
ORDER CODES :
74VHC86M
74VHC86T
Power down protection is provided on all inputs
and 0 to 7V can be accepted on inputs with no
regard to the supply voltage. This device can be
used to interface 5V to 3V.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
June 1999
1/8
74VHC86
INPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN No
SYMBOL
1, 4, 9, 12
1A to 4A
NAME AND FUNCT ION
Data Inputs
2, 5, 10, 13
1B to 4B
Data Inputs
3, 6, 8, 11
1Y to 4Y
Data Outputs
7
GND
Ground (0V)
14
VCC
Positive Supply Voltage
TRUTH TABLE
A
B
Y
L
L
L
L
H
H
H
L
H
H
H
L
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
Supply Voltage
-0.5 to +7.0
V
VI
DC Input Voltage
-0.5 to +7.0
V
VO
DC Output Voltage
-0.5 to VCC + 0.5
V
IIK
DC Input Diode Current
- 20
mA
IOK
DC Output Diode Current
± 20
mA
IO
DC Output Current
± 25
mA
± 75
mA
VCC
ICC or IGND DC VCC or Ground Current
Tstg
Storage Temperature
TL
Lead Temperature (10 sec)
-65 to +150
o
300
o
C
C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
Supply Voltage
VI
Input Voltage
VO
Output Voltage
Top
Operating Temperature
dt/dv
Input Rise and Fall Time (see note 1) (VCC = 3.3 ± 0.3V)
(V CC = 5.0 ± 0.5V)
1) VIN from 30% to70%of VCC
2/8
Valu e
Unit
2.0 to 5.5
V
0 to 5.5
V
0 to VCC
-40 to +85
0 to 100
0 to 20
V
o
C
ns/V
ns/V
74VHC86
DC SPECIFICATIONS
Symb ol
VIH
VIL
VOH
VOL
Parameter
T est Cond ition s
Min.
ICC
Typ .
Un it
-40 to 85 o C
Max.
Min .
Max.
High Level Input
Voltage
2.0
1.5
1.5
3.0 to 5.5
0.7VCC
0.7VCC
Low Level Input
Voltage
2.0
0.5
0.5
3.0 to 5.5
0.3VCC
0.3VCC
High Level Output
Voltage
Low Level Output
Voltage
2.0
IO=-50 µA
1.9
2.0
1.9
3.0
IO=-50 µA
IO=-50 µA
2.9
3.0
2.9
4.5
4.4
4.5
4.4
3.0
IO=-4 mA
2.58
2.48
4.5
IO=-8 mA
3.94
3.8
Input Leakage Current
Quiescent Supply
Current
V
V
V
2.0
IO=50 µA
0.0
0.1
0.1
3.0
IO=50 µA
IO=50 µA
0.0
0.1
0.1
0.0
0.1
0.1
0.44
4.5
II
Value
T A = 25 o C
V CC
(V)
V
3.0
IO=4 mA
0.36
4.5
IO=8 mA
0.36
0.44
0 to 5.5
VI = 5.5V or GND
±0.1
±1.0
µA
5.5
VI = VCC or GND
2
20
µA
AC ELECTRICAL CHARACTERISTICS (Input t r = tf =3 ns)
Symb ol
Parameter
V CC
(V)
tPLH
tPHL
Propagation Delay
Time
Test Co ndition
CL
(pF )
Value
T A = 25 o C
3.3
3.3(*)
5.0(**)
15
50
15
Typ .
7.0
9.5
4.8
(**)
50
6.3
(*)
5.0
Min.
Un it
-40 to 85 o C
Max.
11.0
14.5
6.8
Min .
1.0
1.0
1.0
Max.
13.0
16.5
8.0
8.8
1.0
10.0
ns
(*) Voltage range is 3.3V ± 0.3V
(**) Voltage range is 5V ± 0.5V
CAPACITIVE CHARACTERISTICS
Symb ol
Parameter
T est Cond ition s
Value
o
T A = 25 C
Min.
-40 to 85 C
Typ .
Max.
10
C IN
Input Capacitance
4
CPD
Power Dissipation
Capacitance (note 1)
18
Un it
o
Min .
Max.
10
pF
pF
1) CPD isdefined as the value of the IC’sinternal equivalent capacitance which is calculated fromthe operating current consumption without load. (Referto
Test Circuit).Average operating current can be obtained by the following equation. ICC(opr) = CPD • VCC • fIN + ICC/4 (per Gate)
3/8
74VHC86
DYNAMIC SWITCHING CHARACTERISTICS
Symb ol
Parameter
T est Cond ition s
Dynamic Low Voltage
Quiet Output (note 1, 2)
5.0
VIHD
Dynamic High Voltage
Input (note 1, 3)
5.0
VILD
Dynamic Low Voltage
Input (note 1, 3)
5.0
VOLP
VOLV
Value
T A = 25 o C
V CC
(V)
Min.
-0.8
C L = 50 pF
Un it
-40 to 85 o C
Typ .
Max.
0.3
0.8
Min .
Max.
-0.3
3.5
V
1.5
1) Worst case package.
2) Max number of outputs defined as (n). Data inputs are driven 0V to 5.0V, (n -1) outputs switching and one output at GND.
3) Max number of data inputs (n) switching. (n-1) switching 0V to5.0V. Inputs under test switching: 5.0V to threshold (VILD), 0V to threshold (VIHD), f=1MHz.
TEST CIRCUIT
CL = 15/50 pF or equivalent (includes jig and probe capacitance)
RT = ZOUT of pulse generator (typically 50Ω)
4/8
74VHC86
WAVEFORM: PROPAGATION DELAYS (f=1MHz; 50% duty cycle)
5/8
74VHC86
SO-14 MECHANICAL DATA
mm
DIM.
MIN.
TYP.
A
a1
inch
MAX.
MIN.
TYP.
1.75
0.1
0.068
0.2
a2
MAX.
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45 (typ.)
D
8.55
8.75
0.336
0.344
E
5.8
6.2
0.228
0.244
e
1.27
e3
0.050
7.62
0.300
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
S
0.68
0.026
8 (max.)
P013G
6/8
74VHC86
TSSOP14 MECHANICAL DATA
mm
DIM.
MIN.
inch
TYP.
A
MAX.
MIN.
TYP.
MAX.
1.1
0.433
A1
0.05
0.10
0.15
0.002
0.004
0.006
A2
0.85
0.9
0.95
0.335
0.354
0.374
b
0.19
0.30
0.0075
0.0118
c
0.09
0.20
0.0035
0.0079
D
4.9
5
5.1
0.193
0.197
0.201
E
6.25
6.4
6.5
0.246
0.252
0.256
E1
4.3
4.4
4.48
0.169
0.173
0.176
e
0.65 BSC
0.0256 BSC
K
0o
4o
8o
0o
4o
8o
L
0.50
0.60
0.70
0.020
0.024
0.028
A
A2
A1
b
e
K
c
L
E
D
E1
PIN 1 IDENTIFICATION
1
7/8
74VHC86
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a trademark of STMicroelectronics
 1999 STMicroelectronics – Printed in Italy – All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
http://www.st.com
.
8/8