12 1-800-735-6200 BatMod™ BatMod Specifications Battery Charger Current Source Modules Parameter Nominal Input Voltage (typical TBP = 25°C, nominal line, 75% load, unless otherwise specified) Output Current The BatMod combines Vicor’s industry standard package with the flexibility of a power converter whose output voltage and output current may be independently set. BatMod’s allow the user to independently program a constant output current and a maximum float voltage. The float voltage is the point at which the BatMod transitions from constant current to constant voltage. These features make the BatMod an ideal candidate for battery charging and other applications which require a controlled current source. The BatMod is also available in booster versions that enable the designer to create systems capable of multiple kilowatts of output power. With its wide range of input options, the BatMod is compatible with all major battery types. This new current output module finds application in systems where easily programmable current is of primary importance. Consult factory for availability of input/output voltage ranges not shown. V Mode: 300 µsec typ. I Mode: 250 µsec typ. Operating Temp./Storage Temp. -10°C to +85°C, -20°C to +100°C -25°C to +85°C, -40°C to +100°C -40°C to +85°C, -55°C to +100°C -55°C to +85°C, -65°C to +100°C Dielectric Withstand Input to Output 3,000VRMS Output to Baseplate 500VRMS Input to Baseplate 1,500VRMS E-Grade C-Grade I-Grade M-Grade Safe Operating Conditions Power Current High Program Exceeded Exceeded Exceeded 18 16.5V 16 14 Safe Operating Area 12 6.9V* 10 13.8V 8 Minimum 13.8V* Operating Voltage 6 4 32 Safe Operating Area Minimum 45.0V Voltage Setpoint 16 Minimum 27.6V* Operating Voltage 12 4 2 4 6 8 10 12 14 16 Amps 14.5A 12V Battery System Maximum Voltage Setpoint Safe Operating Area 55.2V 48 Minimum Voltage Setpoint 40 32 Minimum Operating Voltage 24 16 8 2 Current Power Exceeded Exceeded 64 56 27.6V 24 20 High Program Exceeded 72 Maximum 66.0V Voltage Setpoint 28 Minimum 22.5V Voltage Setpoint 11.25V Power Current High Program Exceeded Exceeded Exceeded 36 Maximum 33.0V Voltage Setpoint Volts Product Highlights Current Control Input Current Monitor Output Voltage Control Input Output Voltage Setpoint Trimmable +10%, -25% Dynamic Characteristics Volts ■ Programmable Output Current ■ Booster Versions Available ■ Size: 4.6" x 2.4" x 0.5" (116,8 x 61,0 x 12,7) ■ UL, CSA, TÜV ■ Compatible with All Major Battery Types ■ Inputs: 48, 150, 300Vdc ■ Outputs: 12, 24, 48Vdc Nom. ■ Analog Current Monitor ■ Analog Overvoltage Adjust ■ CE Marked (Refer to Safe Operating Curves below) Volts Features Remarks 42-60V, 100-200V, 200-400V 12V battery system 24V battery system 48V battery system Zero to max. current Zero to full load Zero to FS output 12V, 24V, 48V Output Respectively VNOM for 50-100% load changes 48Vdc, 150Vdc, 300Vdc 0-14.5A 0-7.25A 0-3.6A 1V to 5V 1V to 5V 0V to 2.5V 15V, 30V, 60V +/-1% 8 1 2 3 4 5 Amps 7 6 8 7.25A 0.5 1 1.5 2 2.5 3 3.5 4 Amps 3.6A 24V Battery System 48V Battery System *Maximum recommended battery discharge. Part Numbering Typical Model: VI- 2 6 1 - E U - B M Input: 300Vdc Output: 12Vdc at 200W Module Input Voltage Output Voltage 2 = Driver B = Booster Nominal Range 3 = 48V 42 - 60V 5 = 150V 100 - 200V 6 = 300V 200 - 400V Nominal Range 1 = 12V (11.25-16.5V) 3 = 24V1 (22.5-33.0V) 4 = 48V (45.0-66.0V) Product Grade E C I M = = = = -10°C -25°C -40°C -55°C to +85°C to +85°C to +85°C to +85°C 1. Available in 300V input only. Packaging Options: SlimMod™, high power density, flangeless packages and FinMods™, featuring integral finned heatsinks. SlimMod: Add the suffix -S to the end of the BatMod part number. FinMods: Add the suffix -F1 for .25"H Longitudinal Fin; F2 for .5"H Longitudinal Fin -F3 for .25"H Transverse Fin; F4 for .5"H Transverse Fin 74 12 1-800-735-6200 Typical Applications DC Input Battery Charger +In Gate In DC Input BatMod Gate Out –In +Out V TRIM I TRIM I MON –Out + External Control Functions 12-48V Battery – DC Input Programmable Current Source +In Gate In DC Input Gate Out BatMod –In +Out V TRIM I TRIM I MON + External Control Functions Load – –Out Mechanical Diagram .50 (12,7) .30 (7,6) ±.015 (0,38) 2.10 (53,3) .15 (3,8) 4.60 (116,8) 3.60 (91,4) .080 (2,0) Dia (2) places Solder plate over copper alloy 1.80 (45,7) 4 9 3 2 8 7 6 1 5 BatMod FULL R .15 (3,8) Product ID this surface 1.40 1.00 (35,6) .70 (25,4) .40 (17,8) (10,2) .35 (8,9) ±.015 (0,38) .040 (1,0) Dia (7) places Solder plate over copper alloy Pin # 1 2 3 4 5 6* 7* 8* 9 Function +In Gate In Gate Out -In +Out VTRIM ITRIM IMON -Out * Do not connect on Booster modules 2.40 (61,0) 4.20 (106,7) .22 (5,6) MIN .50 (12,7) .30 (7,6) Min 1.75 (44,5) +.030 (0,76) -.000 .01 .12 (3,0) Aluminum Base 75