FAIRCHILD NC7SZU04_09

NC7SZU04
TinyLogic® UHS Unbuffered Inverter
Features
Description
ƒ
Unbuffered for Crystal Oscillator and Analog
Applications
ƒ
ƒ
ƒ
ƒ
Balanced Output Drive: ±16mA at 4.5V VCC
The NC7SZU04 is a single unbuffered inverter from
Fairchild’s Ultra-High Speed series of TinyLogic®. The
special purpose unbuffered circuit design is primarily
intended for crystal oscillator or analog applications.
The device is fabricated with advanced CMOS
technology to achieve ultra-high speed with high output
drive while maintaining low static power dissipation over
a broad VCC operating range. The device is specified to
operate over the 1.65V to 5.5V VCC range.
ƒ
ƒ
Ultra-Small MicroPak™ Packages
Broad VCC Operating Range: 1.65V to 5.5V
Matches Performance of LCX Operated at 3.3V VCC
Low Quiescent Power: ICC<2µA, VCC=5.5V,
TA=25°C
Space-Saving SOT23 and SC70 Packages
Ordering Information
Part Number
Top Mark
Eco
Status
NC7SZU04M5X
7ZU4
RoHS
5-Lead SOT23, JEDEC MO-178 1.6mm
3000 Units on
Tape & Reel
NC7SZU04P5X
ZU4
RoHS
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3000 Units on
Tape & Reel
NC7SZU04L6X
C5
RoHS
6-Lead MicroPak™, 1.00mm Wide
5000 Units on
Tape & Reel
NC7SZU04FHX
C5
Green
6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch
5000 Units on
Tape & Reel
Package
Packing Method
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
www.fairchildsemi.com
NC7SZU04 — TinyLogic® UHS Unbuffrered Inverter
October 2009
IEEE/IEC
Figure 1. Logic Symbol
Pin Configurations
Figure 2. SC70 and SOT23 (Top View)
Figure 3. MicroPak (Top Through View)
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
Connection Diagrams
Pin Definitions
Pin # SC70 / SOT23
Pin # MicroPak
Name
Description
1
1,5
NC
2
2
A
3
3
GND
Ground
4
4
Y
Output
5
6
VCC
No Connect
Input
Supply Voltage
Function Table
Y= /A
Inputs
Output
A
Y
L
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
VCC
VIN
VOUT
Parameter
Min.
Max.
Unit
Supply Voltage
-0.5
6.0
V
DC Input Voltage
-0.5
6.0
V
DC Output Voltage
-0.5
6.0
V
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IOUT
DC Output Current
ICC or IGND
TSTG
VIN < -0.5V
-50
VIN > VCC+5.0V
+20
VOUT < -0.5V
-50
VOUT > 0.5V, VCC=GND
+50
DC VCC or Ground Current
Storage Temperature Range
-65
TJ
Junction Temperature Under Bias
TL
Junction Lead Temperature (Soldering, 10 Seconds)
PD
ESD
Power Dissipation at +85°C
mA
mA
±50
mA
±100
mA
+150
°C
+150
°C
+260
°C
SOT-23
200
SC70-5
150
MicroPak-6
130
MicroPak2-6
120
Human Body Model, JEDEC:JESD22-A114
4000
Charge Device Model, JEDEC:JESD22-C101
2000
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
Absolute Maximum Ratings
mW
V
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
VCC
VIN
VOUT
TA
Parameter
Conditions
Min.
Max.
Supply Voltage Operating
1.65
5.50
Supply Voltage Data Retention
1.50
5.50
V
Input Voltage
0
5.5
V
Output Voltage
0
VCC
V
-40
+85
°C
Operating Temperature
SOT-23
θJA
Unit
Thermal Resistance
300
SC70-5
425
MicroPak-6
500
MicroPak2-6
560
°C/W
Note:
1. Unused inputs must be held HIGH or LOW. They may not float.
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
www.fairchildsemi.com
3
Symbol
Parameter
VIH
HIGH Level
Input Voltage
VIL
LOW Level Input
Voltage
VCC
TA=+25°C
Conditions
Min.
0.85VCC
3.0 to 5.5
0.80VCC
0.80VCC
0.15VCC
3.0 to 5.5
0.20VCC
0.20VCC
1.65
1.55
1.65
1.55
1.60
1.80
1.60
2.10
2.30
2.10
2.70
3.00
2.70
VIN=VIL, IOH=-100µA
4.50
4.00
4.40
4.00
IOH=-4mA
1.29
1.52
1.29
2.30
IOH=-4mA
1.90
2.14
1.90
3.00
VIN=GND IOH=-8mA
2.40
2.75
2.40
2.30
1.65
3.00
IOH=-12mA
2.30
2.61
4.50
IOH=-16mA
3.80
4.13
1.65
LOW Level
Output Voltage
0.10
0.00
0.20
0.20
0.00
0.20
0.20
3.00
0.00
0.30
0.30
4.50
0.00
0.50
0.50
Quiescent
Supply Current
ICCPEAK
VIN=VIH, IOL=100µA
1.65
IOL=4mA
0.80
0.24
0.24
2.30
IOL=4mA
0.10
0.30
0.30
3.00
ICC
3.80
0.10
2.30
VIN=VCC
V
V
0.00
1.80
IIN
V
0.15VCC
1.80
Units
Max.
1.8 to 2.7
HIGH Level
Output Voltage
Input Leakage
Current
Min.
0.85VCC
3.00
VOL
Max.
1.8 to 2.7
2.30
VOH
Typ.
TA=-40 to +85°C
V
IOL=8mA
0.17
0.40
0.40
3.00
IOL=12mA
0.25
0.55
0.55
4.50
IOL=16mA
0.226
0.55
0.55
VIN=5.5V, GND
±1
±10
µA
1.65 to 5.50 VIN=5.5V, GND
2
20
µA
0 to 5.5
Peak Supply
Current in
Analog
Operation
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
2
1.8
2.5
3.3
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
DC Electrical Characteristics
VOUT=Open,
VIN=Adjust for Peak
ICC Current
4
10
5.0
mA
30
www.fairchildsemi.com
4
Symbol
Parameter
VCC
TA=+25°C
Conditions
Min.
1.65
1.80
2.50 ± 0.20
tPLH,tPHL
Propagation Delay
CL=15pF,
RL=1MΩ,
3.30 ± 0.30
Typ.
TA=-40 to +85°C
Max.
Min.
Max.
1.0
11.7
1.0
12.1
1.0
8.5
1.0
9.0
0.8
6.2
0.8
6.5
0.5
4.5
0.5
4.8
5.00 ± 0.50
0.5
3.9
0.5
4.1
3.30 ± 0.30 CL=50pF,
5.00 ± 0.50 RL=500Ω,
1.0
6.0
1.0
6.5
5.0
0.8
5.5
0.8
CIN
Input Capacitance
0.00
CPD
Power Dissipation
Capacitance(2)
3.30
6.3
5.00
9.5
Units
Figure
ns
Figure 4
Figure 5
4.5
pF
pF
Figure 6
Note:
2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating
current consumption (ICCD) at no output lading and operating at 50% duty cycle. CPD is related to ICCD dynamic
operating current by the expression: ICCD=(CPD)(VCC)(fIN)+(ICCstatic).
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
AC Electrical Characteristics
Note:
3. CL includes load and stray capacitance.
4. Input PRR=1.0MHz; tW =500ns
Figure 4. AC Test Circuit
Figure 5. AC Waveforms
Note:
5. When operating the NC7SZU04’s unbuffered output stage in its linear range, as in oscillator applications, care
must be taken to observe maximum power rating for the device and package. The high drive nature of the
design of the output stage results in substantial simultaneous conduction currents when the stage is in the linear
region. See the ICCPEAK specification in the DC Electrical Characteristics table.
6. Input=AC Waveform; tr=tf=1.8ns; PRR=variable; Duty Cycle =50%.
Figure 6. Test Circuit
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
www.fairchildsemi.com
5
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
Physical Dimensions
3.00
2.80
5
SYMM
CL
0.95
0.95
A
4
B
3.00
2.60
1.70
1.50
1
2
2.60
3
(0.30)
1.00
0.50
0.30
0.95
0.20
1.90
C A B
0.70
TOP VIEW
LAND PATTERN RECOMMENDATION
SEE DETAIL A
1.30
0.90
1.45 MAX
0.15
0.05
0.22
0.08
C
0.10 C
NOTES: UNLESS OTHEWISE SPECIFIED
GAGE PLANE
A) THIS PACKAGE CONFORMS TO JEDEC
MO-178, ISSUE B, VARIATION AA,
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) MA05Brev5
0.25
8°
0°
0.55
0.35
0.60 REF
SEATING PLANE
Figure 7. 5-Lead SOT23, JEDEC MO-178 1.6mm
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/SOT23-5L_tr.pdf.
Package Designator
M5X
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
6
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
Physical Dimensions
Figure 8. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf.
Package Designator
P5X
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
7
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
Physical Dimensions
2X
0.05 C
1.45
B
2X
(1)
0.05 C
(0.49)
5X
1.00
(0.75)
(0.52)
1X
A
TOP VIEW
0.55MAX
(0.30)
6X
PIN 1
0.05 C
0.05
0.00
RECOMMENED
LAND PATTERN
0.05 C
C
1.0
DETAIL A
0.10
0.05
0.45
0.35
0.10
0.00 6X
0.25
0.15 6X
C B A
C
0.40
0.30
0.35 5X
0.25
0.40 5X
0.30
0.5
(0.05)
6X
BOTTOM VIEW
DETAIL A
PIN 1 TERMINAL
0.075 X 45
CHAMFER
(0.13)
4X
Notes:
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
2. DIMENSIONS ARE IN MILLIMETERS
3. DRAWING CONFORMS TO ASME Y14.5M-1994
MAC06AREVC
Figure 9. 6-Lead, MicroPak™, 1.0mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator
L6X
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
8
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
Physical Dimensions
DETAIL A
5X
Figure 10. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.
Package Designator
FHX
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
9
NC7SZU04 — TinyLogic® UHS Unbuffered Inverter
© 1996 Fairchild Semiconductor Corporation
NC7SZU04 • Rev. 1.0.2
www.fairchildsemi.com
10