STMICROELECTRONICS STB60N55F3_09

STB60N55F3, STD60N55F3, STF60N55F3
STI60N55F3, STP60N55F3, STU60N55F3
N-channel 55 V, 6.5 mΩ, 80 A, DPAK, IPAK, D2PAK, I2PAK, TO-220
TO-220FP STripFET™ III Power MOSFET
Features
Type
VDSS
RDS(on)
ID
Pw
STB60N55F3
55V
<8.5mΩ
80A
110W
STD60N55F3
55V
<8.5mΩ
80A
110W
STF60N55F3
55V
<8.5mΩ
42A
30W
STI60N55F3
55V
<8.5mΩ
80A
110W
STP60N55F3
55V
<8.5mΩ
80A
110W
STU60N55F3
55V
<8.5mΩ
80A
110W
3
3
1
3
2
1
1
2
DPAK
IPAK
TO-220FP
3
3
12
1
3
■
Standard threshold drive
■
100% avalanche tested
I²PAK
D²PAK
1
2
TO-220
Application
■
Figure 1.
Switching applications
Internal schematic diagram
Description
This STripFET™ III Power MOSFET technology
is among the latest improvements, which have
been especially tailored to minimize on-state
resistance providing superior switching
performances.
Table 1.
Device summary
Order codes
Marking
Package
Packaging
STB60N55F3
60N55F3
D²PAK
Tape and reel
STD60N55F3
60N55F3
DPAK
Tape and reel
STF60N55F3
60N55F3
TO-220FP
Tube
STI60N55F3
60N55F3
I²PAK
Tube
STP60N55F3
60N55F3
TO-220
Tube
STU60N55F3
60N55F3
IPAK
Tube
April 2009
Doc ID 13242 Rev 4
1/20
www.st.com
20
Contents
STx60N55F3
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
Test circuits
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2/20
.............................................. 9
Doc ID 13242 Rev 4
STx60N55F3
1
Electrical ratings
Electrical ratings
Table 2.
Absolute maximum ratings
Value
Symbol
DPAK/D²PAK
Parameter
Unit
TO-220
TO-220FP
IPAK/I²PAK
VDS
Drain-source voltage (VGS=0)
VGS
Gate-source voltage
55
V
± 20
V
ID
Drain current (continuous) at TC = 25°C
80
42
A
ID
Drain current (continuous) at TC = 100°C
56
30
A
IDM (1)
Drain current (pulsed)
320
168
A
PTOT
Total dissipation at TC = 25°C
110
30
W
Derating factor
0.73
0.2
W/°C
dv/dt (2)
Peak diode recovery voltage slope
11
V/ns
EAS (3)
Single pulse avalanche energy
390
mJ
VISO
Tj
Tstg
Insulation withstand voltage (RMS) from all three
leads to external heat sink (t=1s;TC=25°C)
2500
Operating junction temperature
Storage temperature
-55 to 175
V
°C
1. Pulse width limited by safe operating area
2. ISD < 80 A, di/dt < 300A/µs, VDD < V(BR)DSS. Tj < Tjmax
3. Starting Tj=25°C, Id=32 A, Vdd= 25 V
Table 3.
Thermal resistance
Value
Symbol
Parameter
DPAK
Rthj-case
IPAK
I²PAK
Thermal resistance junctioncase max
Thermal resistance junctionRthj-pcb (1) pcb max
Unit
D²PAK TO-220 TO-220FP
1.36
50
5
35
°C/W
°C/W
Rthj-a
Thermal resistance junctionambient max
100
62.5
°C/W
Tl
Maximum lead temperature
for soldering purpose
275
300
°C
1. When mounted on FR-4 board of 1inch², 2oz Cu
Doc ID 13242 Rev 4
3/20
Electrical characteristics
2
STx60N55F3
Electrical characteristics
(TCASE= 25 °C unless otherwise specified)
Table 4.
Symbol
V(BR)DSS
Static
Parameter
Test conditions
Drain-source breakdown
voltage
ID = 250µA, VGS= 0
Min. Typ. Max. Unit
55
V
VDS = Max rating,
VDS = Max rating,Tc = 125°C
10
100
µA
µA
Gate body leakage current
(VDS = 0)
VGS = ±20V
±200
nA
VGS(th)
Gate threshold voltage
VDS= VGS, ID = 250µA
4
V
RDS(on)
Static drain-source on
resistance
VGS= 10V, ID= 32A
8.5
mΩ
IDSS
Zero gate voltage drain
current (VGS = 0)
IGSS
Table 5.
Symbol
gfs (1)
Ciss
Coss
Crss
Qg
Qgs
Qgd
2
6.5
Dynamic
Parameter
Test conditions
Min. Typ. Max. Unit
Forward transconductance
VDS =25V, ID=32A
-
50
S
Input capacitance
Output capacitance
Reverse transfer capacitance
VDS = 25V, f = 1MHz, VGS=0
-
2200
500
25
pF
pF
pF
-
33.5
12.5
9.5
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 27V, ID = 65A
VGS =10V
(see Figure 16)
45
nC
nC
nC
1. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
Table 6.
Symbol
td(on)
tr
td(off)
tf
4/20
Switching on/off (inductive load)
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
Min.
VDD = 27V, ID = 32A,
RG = 4.7Ω, VGS = 10V
-
20
50
-
ns
ns
-
35
11.5
-
ns
ns
(see Figure 18)
VDD = 27V, ID = 32A,
RG = 4.7Ω, VGS = 10V
(see Figure 18)
Doc ID 13242 Rev 4
Typ. Max. Unit
STx60N55F3
Table 7.
Symbol
ISD
ISDM
(1)
ISD
ISDM (1)
VSD
trr
Qrr
IRRM
Electrical characteristics
Source drain diode
Parameter
Test conditions
Packages
Min.
Typ.
Max.
Unit
2
Source-drain current
Source-drain current (pulsed)
DPAK-D PAKI2PAK-I2PAKTO-220
-
80
320
A
A
Source-drain current
Source-drain current (pulsed)
TO-220FP
-
42
168
A
A
-
1.5
V
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD = 65A, VGS = 0
ISD = 65A, VDD = 30V
di/dt = 100A/µs,
Tj = 150°C
(see Figure 17)
-
47
87
3.7
ns
nC
A
1. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
Doc ID 13242 Rev 4
5/20
Electrical characteristics
STx60N55F3
2.1
Electrical characteristics (curves)
Figure 2.
Safe operating area for TO-220
D²PAK / IPAK / I²PAK / DPAK
Figure 3.
Thermal impedance for TO-220
D²PAK / IPAK / I²PAK / DPAK
Figure 4.
Safe operating area for TO-220FP
Figure 5.
Thermal impedance for TO-220FP
6/20
Doc ID 13242 Rev 4
STx60N55F3
Electrical characteristics
Figure 6.
Output characteristics
Figure 7.
Transfer characteristics
Figure 8.
Normalized BVDSS vs temperature
Figure 9.
Static drain-source on resistance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Doc ID 13242 Rev 4
7/20
Electrical characteristics
STx60N55F3
Figure 12. Normalized gate threshold voltage
vs temperature
Figure 13. Normalized on resistance vs
temperature
Figure 14. Source-drain diode forward
characteristics
8/20
Doc ID 13242 Rev 4
STx60N55F3
3
Test circuits
Test circuits
Figure 15. Switching times test circuit for
resistive load
Figure 16. Gate charge test circuit
Figure 17. Test circuit for inductive load
Figure 18. Unclamped inductive load test
switching and diode recovery times
circuit
Figure 19. Unclamped inductive waveform
Figure 20. Switching time waveform
Doc ID 13242 Rev 4
9/20
Package mechanical data
4
STx60N55F3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
10/20
Doc ID 13242 Rev 4
STx60N55F3
Package mechanical data
I²PAK (TO-262) mechanical data
mm
inch
Dim
Min
A
A1
b
b1
c
c2
D
e
e1
E
L
L1
L2
Typ
4.40
2.40
0.61
1.14
0.49
1.23
8.95
2.40
4.95
10
13
3.50
1.27
Doc ID 13242 Rev 4
Max
Min
4.60
2.72
0.88
1.70
0.70
1.32
9.35
2.70
5.15
10.40
14
3.93
1.40
0.173
0.094
0.024
0.044
0.019
0.048
0.352
0.094
0.194
0.393
0.511
0.137
0.050
Typ
Max
0.181
0.107
0.034
0.066
0.027
0.052
0.368
0.106
0.202
0.410
0.551
0.154
0.055
11/20
Package mechanical data
STx60N55F3
D²PAK (TO-263) mechanical data
mm
inch
Dim
Min
A
A1
b
b2
c
c2
D
D1
E
E1
e
e1
H
J1
L
L1
L2
R
V2
Typ
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
10
8.50
Max
Min
4.60
0.23
0.93
1.70
0.60
1.36
9.35
0.173
0.001
0.027
0.045
0.017
0.048
0.352
0.295
0.394
0.334
10.40
2.54
4.88
15
2.49
2.29
1.27
1.30
Max
0.181
0.009
0.037
0.067
0.024
0.053
0.368
0.409
0.1
5.28
15.85
2.69
2.79
1.40
1.75
0.192
0.590
0.099
0.090
0.05
0.051
8°
0°
0.4
0°
0079457_M
12/20
Typ
Doc ID 13242 Rev 4
0.208
0.624
0.106
0.110
0.055
0.069
0.016
8°
STx60N55F3
Package mechanical data
TO-252 (DPAK) mechanical data
DIM.
mm.
min.
typ
max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
E
5.10
6.40
6.60
E1
4.70
e
2.28
e1
4.40
4.60
H
9.35
10.10
L
1
L1
2.80
L2
L4
0.80
0.60
1
R
V2
0.20
8o
0o
0068772_G
Doc ID 13242 Rev 4
13/20
Package mechanical data
STx60N55F3
TO-251 (IPAK) mechanical data
mm.
DIM.
min.
typ
max.
A
2.20
2.40
A1
0.90
1.10
b
0.64
0.90
b2
0.95
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
E
6.40
6.60
e
e1
2.28
4.40
4.60
H
16.10
L
9.00
9.40
(L1)
0.80
1.20
L2
0.80
V1
10 o
0068771_H
14/20
Doc ID 13242 Rev 4
STx60N55F3
Package mechanical data
TO-220 mechanical data
mm
inch
Dim
Min
A
b
b1
c
D
D1
E
e
e1
F
H1
J1
L
L1
L20
L30
∅P
Q
Typ
4.40
0.61
1.14
0.48
15.25
Max
Min
4.60
0.88
1.70
0.70
15.75
0.173
0.024
0.044
0.019
0.6
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
1.27
10
2.40
4.95
1.23
6.20
2.40
13
3.50
Doc ID 13242 Rev 4
Max
0.181
0.034
0.066
0.027
0.62
0.050
16.40
28.90
3.75
2.65
Typ
0.409
0.106
0.202
0.051
0.256
0.107
0.551
0.154
0.645
1.137
3.85
2.95
0.147
0.104
0.151
0.116
15/20
Package mechanical data
STx60N55F3
TO-220FP mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.5
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
L7
E
A
B
D
Dia
L5
L6
F1
F2
F
G
H
G1
L4
L2
L3
7012510_Rev_J
16/20
Doc ID 13242 Rev 4
STx60N55F3
5
Packaging mechanical data
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
DIM.
mm
inch
MIN.
MAX.
A0
6.8
7
0.267 0.275
B0
10.4
10.6
0.409 0.417
B1
MIN.
MIN.
330
1.5
C
12.8
D
20.2
G
16.4
N
50
T
TAPE MECHANICAL DATA
inch
MAX.
MAX.
12.992
0.059
13.2
0.504 0.520
18.4
0.645 0.724
0.795
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
2500
MAX.
12.1
0.476
1.6
0.059 0.063
D
1.5
D1
1.5
E
1.65
1.85
F
7.4
7.6
0.291 0.299
K0
2.55
2.75
0.100 0.108
0.059
0.065 0.073
P0
3.9
4.1
0.153 0.161
P1
7.9
8.1
0.311 0.319
P2
1.9
2.1
R
40
W
15.7
0.075 0.082
1.574
16.3
0.618
0.641
Doc ID 13242 Rev 4
17/20
Packaging mechanical data
STx60N55F3
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
MAX.
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
0.933 0.956
* on sales type
18/20
Doc ID 13242 Rev 4
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
STx60N55F3
6
Revision history
Revision history
Table 8.
Document revision history
Date
Revision
Changes
09-Feb-2007
1
First release
22-Feb-2007
2
Description has been updated
07-Mar-2007
3
The Figure 2, Figure 4, Figure 9 have been changed
17-Apr-2009
4
Added device in I2PAK
Updated all mechanical data
Doc ID 13242 Rev 4
19/20
STx60N55F3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
20/20
Doc ID 13242 Rev 4