MBR3035CT - MBR30150CT Pb 30.0AMPS. Schottky Barrier Rectifiers TO-220AB RoHS COMPLIANCE Features Plastic material used carriers Underwriters Laboratory Classification 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage - high frequency inventers, free wheeling, and polarity protection applications Guard-ring for overvoltage protection High temperature soldering guaranteed: 260℃/10 seconds, 0.25", (6.35mm) from case Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Cases: JEDEC TO-220AB molded plastic Marking Diagram Terminals: Pure tin plated, lead free, solderable per MIL-STD-750, Method 2026 MBR30XXCT G = Green Compound Polarity: As marked Y = Year Mounting position:Any WW = Work Week Mounting torque: 5 in- lbs, max Weight: 1.90 grams = Specific Device Code Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage MBR Symbol 3035 CT VRRM 35 VRMS 24 MBR 3045 CT 45 MBR 3050 CT 50 MBR 3060 CT 60 MBR 3090 CT 90 MBR MBR 30100 30150 CT CT 100 150 31 35 42 63 70 105 V 45 50 60 90 100 150 V Units V Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current IF(AV) 30 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) IFRM 30 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) IFSM 200 A Peak Repetitive Reverse Surge Current (Note 1) IRRM Maximum Instantaneous Forward Voltage at (Note 2) IF=15A, TA=25℃ IF=15A, TA=125℃ IF=30A, TA=25℃ IF=30A, TA=125℃ Maximum Instantaneous Reverse Current @ TA=25 ℃ at Rated DC Blocking Voltage Per Leg @ TA=125 ℃ Voltage Rate of Change,(Rated VR) Typical Junction Capacitance @4V 1.0MHz VF IR 35 0.5 1.0 0.7 0.77 0.84 0.95 0.6 0.67 0.70 0.92 0.82 - 0.94 1.02 0.73 - 0.82 0.98 0.2 0.2 0.2 0.1 mA 15 10 7.5 5 mA 600 460 10,000 dV/dt Cj A V V/us 320 pF O Maximum Thermal Resistance Per Leg RθJC Operating Junction Temperature Range TJ - 65 to + 150 O C TSTG - 65 to + 175 O C Storage Temperature Range 1.0 1.5 Note 1: 2.0uS Pulse Width, f=1.0KHz Note 2: Pulse Test : 300us Pulse Width, 1% Duty Cycle Version:G11 C/W RATINGS AND CHARACTERISTIC CURVES (MBR3035CT THRU MBR30150CT) FIG.1- FORWARD CURRENT DERATING CURVE 35 300 PEAK FORWARD SURGE A CURRENT (A) AVERAGE FORWARD A CURRENT (A) 30 25 20 15 10 RESISTIVE OR INDUCTIVELOAD 5 200 150 100 50 0 0 50 100 150 1 CASE TEMPERATURE ( oC) FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISRICS PER LEG INSTANTANEOUS REVERSE CURRENT (mA) MBR3035CT-MBR3045CT MBR3050CT-MBR3060CT 10 1 MBR30150CT MBR3090CT-MBR30100CT 0.1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER LEG 100 100 IF-INSTANTANEOUS FORWARD CURRENT (A) 8.3mS Single Half Sine Wave JEDEC Method 250 0 MBR3035CT-MBR3045CT MBR3050CT-MBR30150CT 10 TA=125℃ 1 TA=75℃ 0.1 TA=25℃ 0.01 0.001 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 FORWARD VOLTAGE (V) 40 60 80 100 120 140 FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 10000 100 TA=25℃ f=1.0MHz Vsig=50mVp-p TRANSIENT THERMAL IMPEDANCE (℃/W) MBR3035CT-MBR3045CT MBR3050CT-MBR3060CT MBR3090CT-MBR30150CT 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE (pF) A FIG. 2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG 10 1000 100 1 0.1 0.1 1 10 REVERSE VOLTAGE (V) 100 0.01 0.1 1 10 100 T-PULSE DURATION. (sec) Version:G11