STMICROELECTRONICS S2000AF

S2000AF
High voltage NPN power transistor for standard
definition CRT display
Features
■
State-of-the-art technology:
– Diffused collector “Enhanced generation”
■
Stable performances versus operating
temperature variation
■
Low base-drive requirement
■
Tigh hFE range at operating collector current
■
High ruggedness
■
Fully insulated power package U.L. compliant
3
1
2
ISOWATT218FX
Applications
■
Horizontal deflection output for CRT TV
■
Switch mode power supplies for CRT TV
Figure 1.
Internal schematic diagram
Description
The S2000AF is manufactured using diffused
collector in planar technology adopting new and
enhanced high voltage structure for updated
performance to the horizontal deflection stage.
Table 1.
Device summary
Order code
Marking
Package
Packaging
S2000AF
S2000AF
ISOWATT218FX
Tube
August 2007
Rev 2
1/11
www.st.com
11
Content
S2000AF
Content
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2/11
S2000AF
1
Electrical ratings
Electrical ratings
Table 2.
Absolute maximum rating
Symbol
Parameter
Value
Unit
VCES
Collector-emitter voltage (VBE = 0)
1500
V
VCEO
Collector-emitter voltage (IB = 0)
700
V
VEBO
Collector-base voltage (IC = 0)
9
V
Collector current
8
A
Collector peak current (tP < 5ms)
15
A
Base current
4
A
PTOT
Total dissipation at Tc = 25°C
50
W
Vins
Insulation withstand voltage (RMS) from all three leads to
external heatsink
2500
V
Tstg
Storage temperature
IC
ICM
IB
TJ
Table 3.
Symbol
-65 to 150
°C
Max. operating junction temperature
150
Thermal data
Parameter
Rthj-case Thermal resistance junction-case _______________max
Value
Unit
2.5
°C/W
3/11
Electrical characteristics
2
S2000AF
Electrical characteristics
(Tcase = 25°C unless otherwise specified)
Table 4.
Symbol
Electrical characteristics
Parameter
ICES
Collector cut-off current
(VBE =0)
IEBO
Emitter cut-off current
(IC =0)
Collector-emitter
VCEO(sus) (1) sustaining voltage
(IC =0)
VCE(sat) (1)
Collector-emitter
saturation voltage
VBE(sat) (1)
Base-emitter saturation
voltage
hFE (1)
ts
tf
DC current gain
Inductive load
Storage time
Fall time
Test conditions
Typ.
VCE = 1500V
VCE = 1500V;
TC= 125°C
VEB = 9V
IC = 100mA
Max.
Unit
0.2
2
mA
mA
1
mA
700
V
IC = 4.5A
IB = 2A
IC = 4.5A
IB = 1A
1
5
V
IC = 4.5A
IB = 1A
1.2
V
IC = 1A
VCE = 5V
IC = 4.5A
VCE = 5V
IC = 4.5A
IB(on) = 0.5A
VBE(off) = -2.7V fh = 16KHz
LBB(off) = 4.5µH
1. Pulsed: Pulse duration = 300 ms, duty cycle 1.5 %
4/11
Min.
10
4.5
30
9
2.5
0.2
µs
µs
S2000AF
2.1
Electrical characteristics
Electrical characteristics (curves)
Figure 2.
Safe operating area
Figure 3.
Derating curve
Figure 4.
DC current gain
Figure 5.
DC current gain
Figure 6.
Collector-emitter saturation
voltage
Figure 7.
Base-emitter saturation
voltage
5/11
Electrical characteristics
Figure 8.
6/11
Output characteristics
S2000AF
S2000AF
2.2
Electrical characteristics
Test circuits
Figure 9.
Power losses and inductive load switching
Figure 10. Reverse biased safe operating area
7/11
Package mechanical data
3
S2000AF
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
8/11
S2000AF
Package mechanical data
ISOWATT218FX mechanical data
Dim.
Min.
mm.
Typ
Max.
A
5.30
5.70
C
2.80
3.20
D
3.10
3.50
D1
1.80
2.20
E
0.80
1.10
F
0.65
0.95
F2
1.80
2.20
G
10.30
11.50
G1
5.45
H
15.30
15.70
L
9
10.20
L2
22.80
23.20
L3
26.30
26.70
L4
43.20
44.40
L5
4.30
4.70
L6
24.30
24.70
L7
14.60
15
N
1.80
2.20
R
3.80
4.20
Dia
3.40
3.80
7627132 B
9/11
Revision history
4
S2000AF
Revision history
Table 5.
10/11
Document revision history
Date
Revision
Changes
02-Mar-2007
1
Initial release.
14-Aug-2007
2
Complete document, added all curves (2.1: Electrical characteristics
(curves)
S2000AF
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
11/11