RH-54AC/ACT series Advanced Rad-Hardened high speed CMOS 5V logic series Data Brief Features ■ High speed TPD = 4.5ns typ ■ Low power DC dissipation: 8µA max ■ Symmetrical 24mA outputs characteristics ■ High noise immunity, 28% of min VCC ■ Power down input protection ■ Balanced propagation delays ■ Improved electrical Latch-up immunity ■ Controlled rise and fall times ■ 2 to 6V operating voltage ■ Available in hermetic Flat/DIL packages ■ Available in DIE form upon request ■ RadHard: 300kRad TID at any Mil1019 dose rates ■ SEL immune to 110MeV/cm²/mg LET ions ■ Designed for Space use: RHA Qml-V DSCC Qualified ■ Engineering model parts meet same electrical specifications as FM parts ■ Detailed Type SMD shall be downloaded from DSCC web.site FLAT14 FLAT16 FLAT20 DIL14 Description The RH-54AC/ACTseries is an advanced RadHard submicron silicon gate CMOS family. It includes a large set of Gates, Flip-Flops, Mutiplexers, Counters, Bus Interfaces and various other functions. RH-54AC/ACT radiation hardness and SEL-SEU immunity make this Logic Series usable in the most difficult environmental conditions. May 2007 Rev 2 For further information contact your local STMicroelectronics sales office. 1/12 www.st.com 12 Contents RH-54AC/ACT series Contents 1 Input equivalent circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Type list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 RH-54AC/ACT series 1 Input equivalent circuit diagram Input equivalent circuit diagram Figure 1. Input equivalent circuit diagram 3/12 Maximum rating 2 RH-54AC/ACT series Maximum rating Stressing the device above the rating listed in the “absolute maximum ratings” table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE program and other relevant quality documents. Table 1. Absolute maximum ratings Symbol Value Unit Supply voltage -0.5 to +7.0 V VI DC input voltage -0.5 to +7.0 V VO DC output voltage -0.5 to VCC + 0.5 V IIK DC input diode current ± 20 mA IOK DC output diode current ± 50 mA IO DC output current ± 50 mA ICC or IGND DC VCC or ground current ± 400 mA TSTG Storage temperature -65 to +150 °C 260 °C Value Unit 2 to 6 V VCC TL Parameter Lead temperature (10 sec) Note: All voltage values are referred to VSS pin voltage. 2.1 Recommended operating conditions Table 2. Recommended operating conditions Symsbol VCC Parameter Supply voltage VI Input voltage 0 to VCC V VO Output voltage 0 to VCC V TOP Operating temperature -55 to 125 °C dt/dv Input rise and fall time (1) VCC = 3.0, 4.5 or 5.5 1. VIN from 30% to 70% of VCC 4/12 0 to 8 ns/V RH-54AC/ACT series 3 Package mechanical data Package mechanical data DILC-14 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. 2.54 0.083 TYP. MAX. A 2.1 a1 3.00 3.70 0.118 a2 0.63 0.88 1.14 0.025 0.035 0.045 B 1.82 2.03 2.39 0.072 0.080 0.094 b 0.40 0.45 0.50 0.016 0.018 0.020 b1 0.20 0.254 0.30 0.008 0.010 0.012 D 18.79 19.00 19.20 0.740 0.748 0.756 E 7.36 7.62 7.87 0.290 0.300 0.310 e1 15.11 15.24 15.37 0.595 0.600 0.605 e2 7.62 7.87 8.12 0.300 0.310 0.320 F 7.11 7.75 0.280 e 2.54 I 0.100 0.146 0.100 0.305 3.70 K 10.90 L 1.14 1.27 0.146 12.1 0.429 1.5 0.045 0.476 0.050 0.059 0016173H 5/12 Package mechanical data RH-54AC/ACT series FPC-14 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 6.75 6.91 7.06 0.266 0.272 0.278 B 9.76 9.95 10.14 0.384 0.392 0.399 C 1.49 1.95 0.059 D 0.10 0.127 0.15 0.004 0.005 0.006 E 7.50 7.62 7.75 0.295 0.300 0.305 F G 1.27 0.38 0.050 0.43 H L 0.077 0.48 0.015 0.017 6.0 0.019 0.236 18.75 22.0 0.738 0.866 M 0.38 0.015 N 4.31 0.170 G F D H 14 8 L N A 7 1 H E B 6/12 M C 016029E RH-54AC/ACT series Package mechanical data FPC-16 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 6.75 6.91 7.06 0.266 0.272 0.278 B 9.76 9.94 10.14 0.384 0.392 0.399 C 1.49 1.95 0.059 D 0.102 0.127 0.152 0.004 0.005 0.006 E 8.76 8.89 9.01 0.345 0.350 0.355 F 0.077 1.27 G 0.38 H 6.0 L 18.75 M 0.33 0.050 0.43 0.48 0.015 0.017 0.019 0.237 0.38 N 22.0 0.738 0.43 0.013 0.867 0.015 4.31 0.017 0.170 G F D H 9 16 A N L 8 1 H E B M C 0016030E 7/12 Package mechanical data RH-54AC/ACT series FPC-20 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 9.98 10.16 10.34 0.393 0.400 0.407 B 9.98 10.16 10.34 0.393 0.400 0.407 C 1.45 1.61 1.78 0.57 0.63 0.070 D 0.10 0.127 0.18 0.004 0.005 0.007 E 11.30 11.43 11.56 0.445 0.450 0.455 F 1.27 G 0.38 H 0.48 0.015 7.24 8.16 0.285 0.320 L 24.46 26.67 0.960 1.050 M 0.45 0.55 0.018 N 0.43 0.050 0.50 7.87 0.017 0.020 0.019 0.022 0.310 O 1.14 1.27 1.40 0.045 0.050 0.055 P 0.10 0.18 0.25 0.004 0.007 0.010 016032F 8/12 RH-54AC/ACT series 4 Type list Type list Table 3. Type list Types DSCC Qml Smd number RHFAC00 5962-87549 Quad 2-input NAND RHFAC00K1 RHFAC02 5962-87612 Quad 2-input NOR RHFAC02K1 RHFAC04 5962-87609 Hex Inverter RHFAC04K1 RHFAC08 5962-89615 Quad 2-input AND RHFAC08K1 RHFAC10 5962-87610 Triple 3-input NAND RHFAC10K1 RHFAC11 5962-87611 Triple 3-input AND RHFAC11K1 RHFAC14 5962-87624 Hex Schmitt Inverter RHFAC14K1 RHFAC32 5962-87614 Quad 2-input OR RHFAC32K1 RHFAC74 5962-88520 Dual D-type FF + preset+clear RHFAC74K1 RHFAC86 5962-89550 Quad exclusive OR RHFAC86K1 RHFAC138 5962-87622 3-to-8 Line Decoder inverter RHFAC138K1 RHFAC139 5962-87623 Dual 2-to-4 line Decoder demux RHFAC139K1 RHFAC151 5962-87691 8-channel Multiplexer RHFAC151K1 RHFAC157 5962-89539 Quad 2-channel Multiplexer RHFAC157K1 RHFAC161 5962-89561 Synchr Binary Counter +Asyn Clear RHFAC161K1 RHFAC174 5962-87626 Hex D-Type Flip Flop with Clear RHFAC174K1 RHFAC191 5962-89749 4bit Synchr. Binary up-down Counter RHFAC191K1 RHFAC240 5962-89550 Octal Bus Buffer - 3-state/Inverter RHFAC240K1 RHFAC244 5962-87552 Octal Bus Buffer - 3-state RHFAC244K1 RHFAC245 5962-87758 Octal Bus Transceiver - 3-state RHFAC245K1 RHFAC273 5962-87756 Octal D-Flip-Flop with Clear RHFAC273K1 RHFAC373 5962-87555 Octal D-type Latch -3-state RHFAC373K1 RHFAC374 5962-87694 Octal D-type Flip Flop -3-state RHFAC374K1 RHFAC541 5962-88706 Octal Bus Buffer - 3-state RHFAC541K1 RHFAC574 5962-96773 Octal D-type Flip Flop -3-state RHFAC574K1 RHFAC16244 5962-04210 16 Line Bus Buffer -3-state RHFAC16244K1 RHFAC16245 5962-04211 16 Line Bus Buffer -3-state RHFAC16245K1 RHFAC16373 5962-04212 16 D-type Latch -3-state RHFAC16373K1 RHFAC16374 5962-04213 16 D-type Flip Flop, 3-state RHFAC16374K1 Functionality EM part number 9/12 Type list RH-54AC/ACT series Table 3. Type list 10/12 Types DSCC Qml Smd number RHFACT00 5962-87699 Quad 2-input NAND RHFACT00K1 RHFACT02 5962-89791 Quad 2-input NOR RHFACT02K1 RHFACT04 5962-89734 Hex Inverter RHFACT04K1 RHFACT08 5962-89547 Quad 2-input AND RHFACT08K1 RHFACT10 5962-92182 Triple 3-input NAND RHFACT10K1 RHFACT11 5962-90772 Triple 3-input AND RHFACT11K1 RHFACT14 5962-96813 Hex Schmitt Inverter RHFACT14K1 RHFACT32 5962-89736 Quad 2-input OR RHFACT32K1 RHFACT74 5962-87525 Dual D-type FF + preset+clear RHFACT74K1 RHFACT86 5962-90687 Quad exclusive OR RHFACT86K1 RHFACT138 5962-87554 3-to-8 Line Decoder inverter RHFACT138K1 RHFACT139 5962-87553 Dual 2-to-4 line Decoder demux RHFACT139K1 RHFACT151 5962-88756 8-channel Multiplexer RHFACT151K1 RHFACT157 5962-89688 Quad 2-channel Multiplexer RHFACT157K1 RHFACT161 5962-91722 Synchr Binary Counter +Asyn Clear RHFACT161K1 RHFACT174 5962-87757 Hex D-Type Flip Flop with Clear RHFACT174K1 RHFACT191 5962-04228 4bit Synchr. Binary up-down Counter RHFACT191K1 RHFACT240 5962-87759 Octal Bus Buffer - 3-state/Inverter RHFACT240K1 RHFACT244 5962-87760 Octal Bus Buffer - 3-state RHFACT244K1 RHFACT245 5962-87663 Octal Bus Transceiver - 3-state RHFACT245K1 RHFACT273 5962-01527 Octal D-Flip-Flop with Clear RHFACT273K1 RHFACT373 5962-87556 Octal D-type Latch -3-state RHFACT373K1 RHFACT374 5962-87631 Octal D-type Flip Flop -3-state RHFACT374K1 RHFACT541 5962-89795 Octal Bus Buffer - 3-state RHFACT541K1 RHFACT574 5962-89601 Octal D-type Flip Flop -3-state RHFACT574K1 RHFACT16244 5962-92022 16 Line Bus Buffer -3-state RHFACT16244K1 RHFACT16245 5962-92023 16 Line Bus Buffer -3-state RHFACT16245K1 RHFACT16373 5962-92024 16 D-type Latch -3-state RHFACT16373K1 RHFACT16374 5962-92025 16 D-type Flip Flop, 3-state RHFACT16374K1 RHFACTQ04 5962-89734 Hex Inverter Functionality EM part number RHFACTQ04K1 RH-54AC/ACT series 5 Revision history Revision history Table 4. Revision history Date Revision Changes 18-Oct-2006 1 First release 10-May-2007 2 Typo in Table 3: Type list on page 9 11/12 RH-54AC/ACT series Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12