IFT COILS< Pin Type:P-7 Series> Type: P-7LC/FM, P-7LC/AM, P-7LC/MW, P-7LC/SW ◆ Product Description ・5.9×5.9mm Max.(L×W), 6.5mm Max. Height. ・Inductance:1~820μH Max. ・Operating frequency:20MHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements ◆ Feature ST A 8.0 4.5 ±0.15 7. 8 ±0. 3 3.3 ±0.3 +0.1 φ0.5-0.05 ◆ Dimensions (mm) 1.3 ±0.15 ・Variable shielded type. ・AM, FM,MW,SW types are available. ・Internally assembled condenser is available. ・Ideally used in Radio (AM,FM,MW,SW),TV. Transceiver ・RoHS Compliance 4.5 ± 0.1 5 7.8 ±0.3 MAX. 8.0 3.0 ±0.5 ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ＊ Dimension without tolerance are approx. ◆ Connection (Bottom View) ④ S ③ ② S ③ ④ ② ① ⑥ P-7LC/FM ① P-7LC/AW S ③ ④ ② ② ⑥ ④ S ③ ⑥ ① P-7LC/MW ① ⑥ P-7LC/SW “S” is winding start. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 IFT COILS< Pin Type:P-7 Series> Type: P-7LC/FM, P-7LC/AM, P-7LC/MW, P-7LC/SW ◆ Specification (P-7LC/FM) (Part No. 2165-T046) Item (4-6) Tuning frequency Measuring Condition 4.5MHz±2% Variable Unloaded Qu 40 Min. Capacity(Int.) 51pF±10% Within 4.5MHz Ext. stray capacity 4pF between (4-6) at measuring. ◆ Specification (P-7LC/AM) (Part No. 2164-T030) Item (1-3) Tuning Frequency Measuring Conditions 455kHz±2% Variable Unloaded Qu Min.60 INT. Capacity 180pF±10% 455kHz Ext. stray capacity 0pF between (1-3) at measuring. ◆ Specification (P-7LC/MW) (Part No. 2166-T033) Item Inductance Unloaded Qu (1-3) Measuring Conditions 270μH ± 3% Variable 796kHz 60 Min. 796kHz ◆ Specification (P-7LC/SW) (Part No. 2167-T015) Item Inductance Unloaded Qu (4-6) Measuring Conditions 32μH ± 1% Variable 2.52MHz 40 Min. 2.52MHz Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2