ATP405 Ordering number : ENA1458A SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET ATP405 General-Purpose Switching Device Applications Features • • ON-resistance RDS(on)=25mΩ (typ.) 10V drive • • Input capacitance Ciss=4000pF (typ.) Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) Unit 100 V ±20 V Allowable Power Dissipation ID IDP PD 70 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Avalanche Energy (Single Pulse) *1 EAS IAV 148 mJ 40 A Drain Current (Pulse) Avalanche Current *2 PW≤10μs, duty cycle≤1% Tc=25°C 40 A 160 A Note : *1 VDD=30V, L=100μH, IAV=40A *2 L≤100μH, Single pulse Package Dimensions Product & Package Information unit : mm (typ) 7057-001 • Package : ATPAK • JEITA, JEDEC :• Minimum Packing Quantity : 3,000 pcs./reel ATP405-TL-H 1.5 6.5 Packing Type: TL Marking ATP405 0.4 0.4 0.5 4 4.6 2.6 6.05 4.6 9.5 7.3 LOT No. TL Electrical Connection 2.3 0.6 2.3 0.55 0.7 3 0.1 0.5 1 0.8 1.7 2,4 2 0.4 1 : Gate 2 : Drain 3 : Source 4 : Drain 1 3 SANYO : ATPAK http://semicon.sanyo.com/en/network 62712 TKIM/42209QA MSIM TC-00001943 No. A1458-1/7 ATP405 Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS IDSS ID=1mA, VGS=0V VDS=100V, VGS=0V VGS=±16V, VDS=0V VDS=10V, ID=1mA Forward Transfer Admittance IGSS VGS(off) | yfs | Static Drain-to-Source On-State Resistance RDS(on) ID=20A, VGS=10V Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Turn-ON Delay Time Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Rise Time Turn-OFF Delay Time min typ Unit max 100 V 2.0 VDS=10V, ID=20A 10 μA ±10 μA 3.5 62 V S 25 33 mΩ 4000 pF 300 pF Crss 170 pF td(on) tr 38 ns 125 ns 220 ns Fall Time td(off) tf Total Gate Charge Qg Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD VDS=20V, f=1MHz See specified Test Circuit. VDS=60V, VGS=10V, ID=40A Switching Time Test Circuit 10V 0V Ratings Conditions 150 ns 68 nC 14 nC 15 IS=40A, VGS=0V nC 0.9 1.2 V Avalanche Resistance Test Circuit VDD=60V VIN L ID=20A RL=3Ω VIN D PW=10μs D.C.≤1% ≥50Ω VOUT ATP405 10V 0V G VDD 50Ω ATP405 P.G 50Ω S Ordering Information Device ATP405-TL-H Package Shipping memo ATPAK 3,000pcs./reel Pb Free and Halogen Free No. A1458-2/7 ATP405 ID -- VDS V 20 1.5 2.0 2.5 Tc=75°C 30 25°C 20 --25°C 10 2 3 4 5 6 7 8 9 Gate-to-Source Voltage, VGS -- V 2 C 5° -2 =- 10 Tc 7 5 °C 75 3 2 1.0 7 5 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 tf 7 tr 5 20 10 0 --25 25 50 75 100 125 td(on) 3 150 IT14607 IS -- VSD VGS=0V Single pulse 0 0.2 0.4 0.6 0.8 1.0 1.2 IT14609 Ciss, Coss, Crss -- VDS f=1MHz 5 2 100 = V GS 30 Diode Forward Voltage, VSD -- V Ciss, Coss, Crss -- pF 3 5.0 IT14605 7 td(off) 4.5 =2 , ID 10V 10000 VDD=60V VGS=10V 7 4.0 0A 40 IT14608 SW Time -- ID 1000 3.5 50 2 100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 5 7 100 Drain Current, ID -- A 3.0 60 Source Current, IS -- A °C 25 2.5 Case Temperature, Tc -- °C VDS=10V 3 2.0 Single pulse 0 --50 10 100 7 5 1.5 RDS(on) -- Tc IT14606 | yfs | -- ID 2 1.0 Cutoff Voltage, VGS(off) -- V Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 50 40 0.5 70 ID=20A Single pulse 60 0 IT14604 RDS(on) -- VGS 70 0 3.0 25°C 1.0 5°C 0.5 Tc= 7 0 Drain-to-Source Voltage, VDS -- V Forward Transfer Admittance, | yfs | -- S 20 10 10 Switching Time, SW Time -- ns 30 5°C VGS=4.0V 40 C 30 50 --25 ° 40 60 Tc= 7 .0 V Drain Current, ID -- A 4.5V 25 °C 6.0 10 Drain Current, ID -- A 8 60 0 5°C 75 ° C 25°C 70 .0V 50 Tc= -2 VDS=10V 70 0 ID -- VGS(off) 80 Tc=25°C --25° C 80 Ciss 3 2 1000 7 5 Coss 3 2 Crss 2 10 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain Current, ID -- A 2 3 5 7 IT14610 100 7 0 5 10 15 20 25 Drain-to-Source Voltage, VDS -- V 30 IT14611 No. A1458-3/7 ATP405 VGS -- Qg 10 VDS=60V ID=40A 7 6 5 3 1 0 0 10 20 30 40 50 60 Total Gate Charge, Qg -- nC PD -- Tc 80 60 50 40 30 20 10 0 20 40 60 80 100 0m 10 7 5 3 2 s 1.0 7 5 3 2 Operation in this area is limited by RDS(on). 2 3 120 Case Temperature, Tc -- °C 140 160 IT14602 5 7 1.0 2 3 5 7 10 2 3 Drain-to-Source Voltage, VDS -- V EAS -- Ta 120 70 0 ms 10 IT14612 Avalanche Energy derating factor -- % Allowable Power Dissipation, PD -- W 80 70 ID=40A 0.1 7 5 3 Tc=25°C 2 Single pulse 0.01 0.01 2 3 5 7 0.1 2 10 μs 0μ s 10 10 n tio era op 4 PW≤10μs s 1m Drain Current, ID -- A 8 IDP=160A 100 7 5 3 2 DC Gate-to-Source Voltage, VGS -- V 9 ASO 5 3 2 5 7100 2 IT14613 100 80 60 40 20 0 0 25 50 75 100 125 Ambient Temperature, Ta -- °C 150 175 IT14603 No. A1458-4/7 ATP405 Taping Specification ATP405-TL-H No. A1458-5/7 ATP405 Outline Drawing ATP405-TL-H Land Pattern Example Mass (g) Unit 0.266 mm * For reference Unit: mm 6.7 6.5 1.6 2 1.5 2.3 2.3 No. A1458-6/7 ATP405 Note on usage : Since the ATP405 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No. A1458-7/7