12MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Input-Output Buffers Features General Description • 12MHz -3dB bandwidth • Supply voltage = 4.5V to 16.5V • Low supply current (per buffer) = 600µA • High slew rate = 15V/µs • Rail-to-rail input/output swing • Ultra-small packages The EL5123C, EL5223C, EL5323C, and EL5423C are low power, high voltage rail-to-rail input/output buffers designed primarily for use in reference voltage buffering applications for TFT_LCDs. They are available in quad (EL5123C), octal (EL5223C), 10-channel (EL5323C), and 12-channel (EL5423C) topologies. All buffers feature a -3dB bandwidth of 12MHz and operate from just 600µA per buffer. This family also features fast slewing and settling times, as well as a continuous output drive capability of 30mA (sink and source). Applications • • • • • • • • • • • • TFT-LCD drive circuits Electronics notebooks Electronic games Touch-screen displays Personal communication devices Personal digital assistants (PDA) Portable instrumentation Sampling ADC amplifiers Wireless LANs Office automation Active filters ADC/DAC buffers Ordering Information Part No EL5123CY Package Tape & Reel Outline # 10-Pin MSOP MDP0043 EL5223CL 24-Pin LPP MDP0046 EL5223CR 20-Pin TSSOP MDP0044 EL5323CL 24-Pin LPP MDP0046 EL5323CR 24-Pin TSSOP MDP0044 EL5423CL 32-Pin LPP MDP0046 EL5423CL 28-Pin TSSOP MDP0044 The quad channel EL5123C is available in the 10-pin MSOP package. The 8-channel EL5223C is available in both the 20-pin TSSOP and 24-pin LPP packages, the 10-channel EL5323C in the 24-pin TSSOP and 24-pin LPP packages, and the 12-channel EL5423C in the 28-pin TSSOP and 32-pin LPP packages. All buffers are specified for operation over the full -40°C to +85°C temperature range. Connection Diagrams 1 VIN1 VOUT1 20 2 VIN2 VOUT2 19 3 VIN3 VOUT3 18 4 VIN4 VOUT4 17 5 VS+ VS- 16 6 VS+ VS- 15 VOUT5 14 8 VIN6 VOUT6 13 9 VIN7 VOUT7 12 10 VIN8 VOUT8 11 10 VOUT1 VIN2 2 9 VOUT2 VS+ 3 8 VS- VIN3 4 7 VOUT3 VIN4 5 6 VOUT4 EL5123C (10-Pin MSOP) Connection Diagrams are continued on page 5 Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation. October 24, 2001 7 VIN5 VIN1 1 EL5223C (20-Pin TSSOP Top View) © 2001 Elantec Semiconductor, Inc. EL5123C, EL5223C, EL5323C, EL5423C - Product Brief EL5123C, EL5223C, EL5323C, EL5423C - Product Brief EL5123C, EL5223C, EL5323C, EL5423C - Product Brief EL5123C, EL5223C, EL5323C, EL5423C - Product Brief 12MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Input-Output Buffers General Disclaimer Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the circuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement. October 24, 2001 WARNING - Life Support Policy Elantec, Inc. products are not authorized for and should not be used within Life Support Systems without the specific written consent of Elantec, Inc. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death. Users contemplating application of Elantec, Inc. Products in Life Support Systems are requested to contact Elantec, Inc. factory headquarters to establish suitable terms & conditions for these applications. Elantec, Inc.’s warranty is limited to replacement of defective components and does not cover injury to persons or property or other consequential damages. Elantec Semiconductor, Inc. 675 Trade Zone Blvd. Milpitas, CA 95035 Telephone: (408) 945-1323 (888) ELANTEC Fax: (408) 945-9305 European Office: +44-118-977-6020 Japan Technical Center: +81-45-682-5820 2 Printed in U.S.A.