NTE1014 Integrated Circuit Module – Hybrid, RF Amp/OSC Description: The NTE1014 is an integrated circuit in a 9–Lead Staggered SIP type package designed for use as an oscillator and RF power output of a wireless microphone. Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Maximum Supply Voltage, VCCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V Maximum Supply Current, ICCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA Maximum Power Dissipation, PDmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mW Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +80°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +100°C Recommended Operating Conditions: (TA = +25°C unless otherwise specified) Recommended Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5V Electrical Characteristics: (TA = +25°C, VCC = 2.5V, AF Frequency = 1kHz, fOSC = 43MHz, Transmission Frequency = 86MHz unless otherwise specified) Parameter Symbol Consumption Current ICC Output Power PO Modulation Sensitivity Test Conditions Min Typ Max Unit – 5 – mA 75Ω at Antenna Terminal 100 – – mV AF Input = 2.5mV 10 – – kHz Pin Connection Diagram (Front View) 9 Bypass 8 Output 7 VCC 6 OSC Coil Section 5 GND 4 Frequency Control 3 OSC Coil PRI Freq 2 Input 1 VCC .126 (3.2) .527 (13.4) .339 (8.6) Max .039 (1.0) Max .256 (6.5) Min .100 (2.54) .050 (1.27) .018 (0.45) .400 (10.16) 1 3 2 5 4 7 6 9 8