RS401M RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION RS407M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Ampere FEATURES * Ideal for printed circuit board * Surge overload rating: 200 amperes peak * Mounting position: Any MECHANICAL DATA RS-4M .122 (3.1) f.134 (3.4) .189 (4.8) .173 (4.4) .150 (3.8) .134 (3.4) .098 (2.5) .146 .130 .708 .669 .074 (1.9) .059 (1.5) (3.7) (3.3) (18.0) (17.0) .114 (2.9) .043 (1.1) .035 (0.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .382 (9.7) .157 (4) .057 (1.45) .041 (1.05) .083 (2.1) .069 (1.7) .602 (15.3) .578 (14.7) .995 (25.3) .983 (24.7) .366 (9.3) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .031 (0.8) .023 (0.6) Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .303 (7.7) .287 (7.3) For capacitive load, derate current by 20%. .303 (7.7) .287 (7.3) .303 (7.7) .287 (7.3) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL RS401M RS402M RS403M RS404M RS405M RS406M RS407M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Output Current at T C = 100 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating Temperature Range Storage Temperature Range Typical Junction Capacitance (Note) Volts IO 4.0 Amps I FSM 150 Amps TJ -55 to + 150 0 C TSTG -55 to + 150 0 C CJ 40 pF ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridgeat Element at 4.0A DC VF o Maximum Reverse Current at Rated @T A = 25 C Dc Blocking Voltage per element @T C = 100 oC NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts IR RS401M RS402M RS403M RS404M RS405M RS406M RS407M UNITS 1.0 Volts 10 uAmps 0.2 mAmps 2001-5 PEAK FORWARD SURGE CURRENT, (A) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 250 8.3ms Single Half Sine-Wave (JEDEC Method) 200 150 100 50 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 AVERAGE FORWARD OUTPUT CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( RS401M THRU RS407M ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE 5 4 3 2 Single Phase Half Wave 60Hz Indutive or Resistive Load 1 0 0 10 100 INSTANTANEOUS REVERSE INSTANTANEOUS FORWARD CURRENT, (A) 150 ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TJ = 25 10 Pulse Width = 300us 1% Duty Cycle 1 .1 .6 50 100 CASE TEMPERATURE, ( TJ = 100 1.0 .1 TJ = 25 .01 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) 2.0 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) RECTRON