TVS RECTRON TFMBJ SEMICONDUCTOR TECHNICAL SPECIFICATION SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 1.0 WATT STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory Glass passivated chip construction 600 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time DO-214AA Ratings at 25 o C ambient temperature unless otherwise specified. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types TFMBJ5.0 thru TFMBJ170 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) SYMBOL VALUE UNITS Peak Power Dissipation with a 10/1000uS (Note 1,2, Fig.1) P PPM Minimum 600 Watts Peak Pulse Current with a 10/1000uS waveform ( Note 1, Fig.3 ) I PPM SEE TABLE 1 Amps PM(AV) 5.0 Watts I FSM 100 Amps VF SEE NOTE 4 Volts T J , T STG -55 to + 150 RATINGS Steady State Power Dissipation at T L = 75oC (Note 2) Peak Forward Surge Current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) (Note 2,3) unidirectional only Maximum Instantaneous Forward Voltage at 50A for unidirectional only (Note 3,4) Operating and Storage Temperature Range NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig.2. 2. Mounted on 0.2 X 0.2”( 5.0 X 5.0mm ) copper pad to each terminal. 3. Lead temperature at TL = 25oC 4. Measured on 8.3mS single half sine-wave duty cycle = 4 pules per minute maximum. 5. VF = 3.5V on TFMBJ-5.0 thru TFMBJ-90 devices and VF = 5.0V on TFMBJ-100 thru TFMBJ-170 devices. 0 C 1998-8 Back RECTRON RECTRON RECTRON