DC/DC Converter TEN 3 Series 3 Watt Features Wide 2 : 1 Input Range High Efficiency up to 84% Full SMD-Design Indefinite Short-Circuit Protection I/O-Isolation 1’500 VDC NEW Input Filter to meet EN 55022, Class A and FCC, Level A without external Components 24-pin DIP with industry Standard Pinout High Reliability, MTBF >1.1 Mio. h 2 Year Product Warranty The TEN 3 series of DC/DC converters, comprising 28 models, has been designed for a wide range of applications in industrial and communication systems. High efficiency allows an operating temperature range of - 40°C to +75°C without derating. Other features of these converters are internal filtering according to EN 55022-A and FCC, level A. Full SMD-design guarantees a high reliability of this product. Models Ordercode TEN 3-0510 TEN 3-0511 TEN 3-0512 TEN 3-0513 TEN 3-0521 TEN 3-0522 TEN 3-0523 TEN 3-1210 TEN 3-1211 TEN 3-1212 TEN 3-1213 TEN 3-1221 TEN 3-1222 TEN 3-1223 TEN 3-2410 TEN 3-2411 TEN 3-2412 TEN 3-2413 TEN 3-2421 TEN 3-2422 TEN 3-2423 TEN 3-4810 TEN 3-4811 TEN 3-4812 TEN 3-4813 TEN 3-2421 TEN 3-4822 TEN 3-4823 www.tracopower.com Input voltage range Output voltage Output current max. Efficiency typ. 4.5 – 9.0 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 600 500 250 200 ± 250 ± 125 ± 100 mA mA mA mA mA mA mA 70 73 77 77 72 75 75 % % % % % % % 9 – 18 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 600 500 250 200 ± 250 ± 125 ± 100 mA mA mA mA mA mA mA 74 78 82 82 77 80 80 % % % % % % % 18 – 36 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 600 500 250 200 ± 250 ± 125 ± 100 mA mA mA mA mA mA mA 76 79 84 84 79 82 82 % % % % % % % 36 – 72 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 600 500 250 200 ± 250 ± 125 ± 100 mA mA mA mA mA mA mA 76 % 79 % 84 % 84 % 80 % 84 % 84 % Page 1 DC/DC Converter TEN 3 Series 3 Watt Input Specifications Input current no load /full load 5 Vin models 12 Vin models 24 Vin models 48 Vin models 40 20 5 3 mA mA mA mA Start-up voltage / under voltage shut down 5 Vin models 12 Vin models 24 Vin models 48 Vin models 4 7 12 24 VDC / 3.5 VDC typ. VDC / 6.5 VDC typ. VDC / 11 VDC typ. VDC / 22 VDC typ Surge voltage (1 sec. max.) 5 Vin models 12 Vin models 24 Vin models 48 Vin models 11 25 50 100 Reverse voltage protection Conducted noise (input) / 800 mA typ. / 300 mA typ. / 150 mA typ. / 75 mA typ. V max. V max. V max. V max. 1.0 A max. (5 V input models excluded) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1% Regulation – Input variation Vin min. to Vin max. ± 0.5 % max. – Load variation 10 – 100 % – single output models – dual output models balanced load – dual output models unbalanced load ± 0.5 % max. ± 1.0 % max. ± 2.0 % max. Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max Temperature coefficient ± 0.02 % / °C Current limitation > 110% of Iout max., constant current Short circuit protection Hiccup mode, indefinite (no automatic recovery) Capacitive load 400 µF max. 100 µF max. – single output models – dual output models General Specifications Temperature ranges – Operating – Case temperature – Storage – 40 °C ... + 75 °C (no derating) + 95 °C max. – 40 °C ... + 125 °C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1.1 Mio. h @ + 25 °C Isolation voltage Input/Output 1’500 VDC Isolation capacity Input/Output 65 pF typ Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 1950 , IEC 60950, EN 60950 Compliance up to 60 VDC input voltage (SELV limit) Safety approval cUL / UL (File no. E188913) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TEN 3 Series 3 Watt Physical Specifications Case material non conductive black plastic (flammability to UL 94V-0) Weight 12 g (0.42 oz) Soldering temperature max. 260 °C / 10 sec. Outline Dimensions mm (inches) 2.54 15.24 (0.6) (0.1) 4.5 ±0.5 20.3 ±0.5 14 10.2 ±0.5 (0.4 ±0.02) (0.2) 2.4 ±0.5 16 (0.1 ±0.02) 23 22 15.24 Bottom view (0.8 ±0.02) 11 5.0 9 (0.6) 2 3 (0.8 ±0.02) Pin-Out Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common 11 No function –Vout 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 5.08 (0.2) 22.86 (0.9) (0.18 ±0.02) 32 ±0.5 (1.25 ±0.02) Pin diameter ø 0.5 ±0.05 (0.02) ±0.002 Tolerances ±0.5 (0.02) Specifications can be changed without notice Rev. 06/00 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] • internet: http://www.tracopower.com Page 3