DC/DC Converters TEN 5WI Series, 6 Watt RoHS compliant pending Features ◆ Ultra wide 4:1 Input Range ◆ Full SMD-Design ◆ High Efficiency up to 84% ◆ Extended Operating Temperature Range -40°C to +85°C ◆ Indefinite Short-circuit Protection ◆ I/O-Isolation 1’500 VDC ◆ Input Filter meets EN 55022, Class A and FCC, Level A without external Components ◆ Shielded Metal Case with insulated Baseplate ◆ 24-pin DIP with Industry Standard Pinout ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TEN 5WI series is a family of dc-dc converter modules with 5 to 6 W output power featuring ultra wide 4:1 input voltage ranges. They come in a compact DIL-24 metal package with industry-standard footprint. A high efficiency up to 84% allows operating temperatures from –40°c to 85°C at full output power without derating. A built-in EMI input filter complies with EN 55022,classA without need of external components. Further standard features include over voltage protection and continuous short circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 5-2410WI 3.3 VDC 1200 mA 76 % TEN 5-2411WI 5 VDC 1000 mA 79 % 12 VDC 500 mA 84 % 15 VDC 400 mA 83 % TEN 5-2421WI ± 5 VDC ± 500 mA 79 % TEN 5-2422WI ± 12 VDC ± 250 mA 84 % TEN 5-2423WI ± 15 VDC ± 200 mA 83 % TEN 5-4810WI 3.3 VDC 1200 mA 76 % TEN 5-4811WI 5 VDC 1000 mA 79 % TEN 5-4812WI 12 VDC 500 mA 84 % 15 VDC 400 mA 83 % TEN 5-4821WI ± 5 VDC ± 500 mA 79 % TEN 5-4822WI ± 12 VDC ± 250 mA 84 % TEN 5-4823WI ± 15 VDC ± 200 mA 83 % TEN 5-2412WI TEN 5-2413WI TEN 5-4813WI http://www.tracopower.com 9 – 36 VDC 18 – 75 VDC Page 1 of 3 DC/DC Converters TEN 5WI Series 6 Watt Input Specifications Input current no load /full load 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Start-up voltage / under voltage shut down 24 Vin models: 9 VDC / 8.5 VDC typ. 48 Vin models: 18 VDC / 16 VDC typ. Surge voltage (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy Regulation ± 2.0 % max. – Input variation Vin min. to Vin max. ± 0.3 % max. – Load variation 10 – 100 % single output models: ± 2.0 % max. dual output models: ± 2.0 % max. balanced load ± 3.0 % max. unbalanced load Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max Temperature coefficient ± 0.02 % / K Current limitation > 110% of Iout max., constant current Short circuit protection indefinite (automatic recovery) Capacitive load 3.3 /5 12 /15 ±5 ±12 /±15 VDC VDC VDC VDC models models models models 1000 µF max. 470 µF max. 220 µF max. (for each output) 100 µF max. (for each output) General Specifications Temperature ranges – Operating – Case temperature – Storage – 40 °C ... + 85 °C + 100 °C max. – 55 °C ... + 125 °C Derating 3.5% /K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C Isolation voltage Input/Output 1’500 VDC Isolation capacity Input/Output 350 pF typ Isolation resistance Input/Output (500 VDC) > 1‘000 M Ohm Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL/cUL 60950 , IEC 60950, EN 60950 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 5WI Series 6 Watt Physical Specifications Case material Steel, Nickel plated Baseplate material non conductive FR4 Potting material Epoxy (UL 94V-0 rated) Weight 17 g (0.49 oz) Soldering temperature max. 260 °C / 10 sec. 2.54 (0.1) (0.18 ±0.02) Insulated Baseplate 14 0.5 (0.02) 3.8 10 ±0.5 2.4 ±0.5 2 3 Bottom view 16 (0.2) 5.08 15.24 (0.6) 23 22 22.86 (0.9) 32 ±0.5 (1.25 ±0.02) 4.5 ±0.5 Outline Dimensions mm (inches) 9 11 15.24 (0.6) Pin-Out Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common 11 No function –Vout 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) (0.09 ±0.02) 20 ±0.5 (0.8 ±0.02) (0.15) (0.4 ±0.02) Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.5 (0.02) Specifications can be changed without notice Rev. 07/05 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43311 4511 · Fax +41 43311 4545 · [email protected] · www.tracopower.com Page 3 of 3