CPC1926Y Power SIP Relay Blocking Voltage Load Current On-Resistance CPC1926Y 250 0.7 1.4 Description Units VP Arms Ω Clare and IXYS have combined to bring OptoMOS® technology, reliability and compact size to a new family of high power solid state relays. As part of that family, the CPC1926Y is a 1-Form-A solid state relay. The CPC1926Y employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture while the input is controlled by a highly efficient GaAlAs infrared LED. The combination of low on resistance and high load current handling capabilities makes the relay suitable for a variety of high performance switching applications. Features • • • • • • • • • Power SIP Package Handle Load Currents Up to 0.7 Arms High Reliability No Moving Parts Low Drive Power Requirements (TTL/CMOS Compatible) Arc-Free With No Snubbing Circuits 2500Vrms Input/Output Isolation No EMI/RFI Generation Machine Insertable, Wave Solderable Approvals • UL recognized component: File # E69938 • Certified to: UL 508 Ordering Information Applications Industrial Controls Motor Control Robotics Medical Equipment—Patient/Equipment Isolation Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • IC Equipment • Home Appliances • • • • • Part # CPC1926Y Description Power SIP Package (25 per tube) Pin Configuration CPC1926Y Pinout Switching Characteristics of Normally Open (Form A) Devices DS-CPC1926Y-R02 www.clare.com 1 CPC1926Y Absolute Maximum Ratings (@ 25˚ C) Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation 1 Isolation voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 250 5 50 1 150 2500 -40 to +85 -40 to +125 Units VP V mA A mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current, Continuous Peak Load Current On-Resistance1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Input/Output Characteristics @ 25°C Capacitance Input/Output 1 Conditions Symbol Min Typ Max Units Free air 10ms IL=100mA VL=250V IL ILPK RON ILEAK 1.2 - 0.7 3 1.4 1 Arms Arms Ω IF=5mA, VL=10V TON - 5 10 ms IF=5mA, VL=10V 50V, f=1MHz TOFF COUT - 3 60 10 - ms pF IL=120mA IF=5mA VR=5V IF IF VF IR 10 0.6 0.9 - 1.2 - 1.4 10 mA mA V µA f=1MHz CI/O - 2 - pF Conditions Symbol Min Typ Max Units - RθJC - 1.5 - °C/W µA Measurement taken within 1 second of on time. Thermal Characteristics Parameter Thermal Resistance (junction to case) 2 www.clare.com R02 CPC1926Y 35 30 30 25 20 15 10 35 30 Device Count (N) 35 Device Count (N) Device Count (N) PERFORMANCE DATA* 25 20 15 10 5 25 20 15 10 5 5 0 1.260 1.265 1.270 1.275 0 0 1.280 1.17 1.19 1.21 1.23 1.25 265 1.27 267 269 271 273 275 277 Blocking Voltage (V) LED Forward Voltage (V) 25 20 20 15 10 5 1.8 2.0 2.2 2.4 2.6 15 10 5 0 2.8 0.017 CPC1926Y Typical Leakage vs. Temperature at Maximum Rated Voltage (Measured across Pins 3 & 4) 0.020 0.015 0.010 60 80 Turn-Off (ms) 0.05 IF = 20mA 0.04 0.03 IF = 10mA 0.02 0.01 -20 0 20 40 60 80 100 LED Forward Voltage Drop (V) CPC1926Y Typical Turn-Off vs. Temperature (Load Current = 100 mADC) -40 0.025 290 1.000 285 280 275 270 100 0.06 0 IF = 10mA 0.2 1.200 260 0.07 0.023 IF = 20mA 0.4 1.400 265 40 0.6 295 0 20 0.8 300 0.005 0 0.021 Turn-On (ms) 0.025 -20 0.019 CPC1926Y Blocking Voltage vs. Temperature Blocking Voltage (V) 0.030 -40 1.0 -40 -20 0 20 40 60 80 100 120 Turn-Off (ms) Turn-On (ms) 0.035 1.2 0.0 0.015 1.8 IF = 10mA 0.800 0.600 IF = 20mA 0.400 0 -40 -20 0 20 40 60 80 100 IF = 50mA 1.4 IF = 20mA 1.2 IF = 10mA 1.0 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 CPC1926Y Typical Turn-On vs.LED Forward Current (Load Current = 100 mADC) CPC1926Y Typical LED Forward Voltage Drop vs. Temperature 1.6 0.8 CPC1926Y Typical Turn-On vs. Temperature (Load Current = 100 mADC) 0.200 Turn-On (ms) 0 Load Current (Arms) 25 Device Count (N) Device Count (N) CPC1926Y Typical Load Current vs. Temperature 1.4 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.clare.com 3 CPC1926Y PERFORMANCE DATA* 0.09 3.5 Turn-Off (ms) 0.08 3.0 0.07 0.05 2.0 0.04 1.5 0.03 IF = 10mA 1.0 0.02 0.5 0.01 0 IF = 5mA 2.5 0.06 0 5 10 15 20 25 30 35 40 45 0 50 CPC1926Y Typical IF for Switch Operation vs. Temperature (Load Current = 100mA) CPC1926Y Typical On-Resistance vs. Temperature (Load Current = 100 mADC) -40 -20 0 20 40 60 80 100 LED Current (mA) CPC1926Y Typical Turn-Off vs. LED Forward Current (Load Current = 100 mADC) 5.50 5.25 5.00 4.75 4.50 4.25 4.00 3.75 3.50 3.25 3.00 -40 -20 0 20 40 60 80 100 LED Forward Current (mA) 7 Load Current (Arms) Load Current (A) 8 1.25 1.00 0.75 0.50 0.25 0.00 -0.25 -0.50 -0.75 -1.00 -1.25 -1.5 CPC1926Y Energy Rating Curve (Free air, no heat sink) 6 5 4 3 2 1 0 -1.0 -0.5 0 0.5 Load Voltage (V) 1.0 1.5 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02 Manufacturing Information Soldering Recommended soldering processes are limited to 245ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 7˚ TYP 4 PLCS PIN 4 PIN 1 0.070 (1.778) Dimensions: inches (mm) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1926Y-R02 ©Copyright 2005, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 5/26/05