Ultra-Mini Dyad™ UM2 Features • Small size Easily surface mountable • Hermetically sealed • Easily formed leads Description Clare’s Ultra-Mini DyadTM is well suited for small, signal switching applications. The small size lends itself to surface mountable applications; working well on higher density PC boards. The Ultra-Mini DyadTM has sputtered ruthenium contacts and an extraordinary seal strength achieved by a patented laser sealing of the leads. In low level or dry switching environments, switches typically exceed 1 billion operations. Applications • Proximity Sensors • Relays • Telecommunications • Automation control • Medical Ordering Information A complete part number is represented by the digits to the right. For example, UM2S1030 is an ULTRA-MINI DYAD™ with a minimum operate value of 10, and a maximum of 30. Refer to the switch operating specification charts for available ranges. Special ranges are available upon request. UM2 S XX XX Maximum Operate Value (NI) Minimum Operate Value (NI) Surface Mount Ultra-Mini Dyad Refer to operating characteristics table for complete part number. Standard Test Coil UM2 Part # Coil-1 Coil Definition NARM1 CTC01 Coil Resistance 1200Ω Number of Turns 5,000 Wire Size 0.0399mm (AWG 46) Bobbin Diameter (inside cell) 3.96mm Winding Length 10.4mm Ultra-Mini DYAD™ Part # Operate Range (NI)1 UM2S1015 10 to 15 UM2S1020 10 to 20 UM2S1030 10 to 30 UM2S1520 15 to 20 UM2S1525 15 to 25 UM2S2025 20 to 25 Ultra-Mini DYAD™ Surface Mount Part # Operate Range (NI)1,2,3 UM2319 10 to 15 UM2315 10 to 20 UM2376 10 to 30 UM2325 15 to 20 UM2341 15 to 25 UM2378 20 to 25 Tolerance = ± 1.5NI 2 Full Blade Sensitivity 3 Surface Mount Switches are packaged 3,000 parts per reel 1 DS-UM2-R2 www.clare.com 1 Ultra-Mini Dyad™ UM2 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for extended period may degrade the device and effect its reliability. Ratings (@ 25˚ C) Parameter Min Typ Max Units Switching Voltage Switching Current Carry Current Switching Fequency Contact Resistance — — — — — — — — 500 — 1 2 175 Volts 0.25 Amps 0.50 Amps — Hz 300 mΩ Derate Linearly 1.33 mw / oC Derate Linearly 3.67 mw / oC Specifications PARAMETER Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Static Contact Resistance Contact Material Electrical Ratings Operate Sensitivity Release Sensitivity Insulation Resistance Capacitance Across Open Contacts Dielectric Strength Operate Time, including bounce Release Time Environmental Ratings Operating Temperature Storage Temperature Soldering Temperature Vibration Resistance Shock Resistance 2 CONDITIONS SYMBOL MIN TYP MAX UNITS Max DC/Peak AC Resist Max DC/Peak AC Resist Max DC/Peak AC Resist Max DC/Peak AC Resist 100mV, 20mA VL IL IC CR - - .120 Ru 175 0.25 0.50 5 0.30 - Volts Amps Amps VAs Ω - Full Blade Tolerance = ±1.5 NI Full Blade Tolerance = ±1.5 NI Between all isolated pins at 100V, 25˚C, 40%RH IR 10 5 109 1011 30 30 - NI NI W Between Contacts At Nominal coil voltage, 30 Hz Square Wave Zener-Diode Suppression TOP 200 - 0.3 0.4 - pF VDC/peak AC msec. TREL - 0.1 - msec. 10Hz-1000Hz 11±1ms, 1/2 Sine Wave TO TA G S -40 -40 - - 125 125 260 20 30 ˚C ˚C ˚C Gs Gs www.clare.com Rev. 2 Ultra-Mini Dyad™ UM2 Mechanical Dimensions Ultra-Mini DYAD™ 5.89 (.232Max.) 0.89 (.035Ref) 1.93 (.076 Ref) 7o Max 1.53 (.060 Max. Ref) 0.13 (.005 Ref) 34.4 2 (1.355) Ultra-Mini DYAD™ SMT 5o Max 0.89 (.035 Ref) 1.93 (.076 Ref) 6.93 (.273) 5.89 (.232 Max.) 0.13 (.005 Ref) 1.53 (.060 Max. Ref) 1.02 (.040 Ref) 10.1 6 0.09 (.004 Min) (.400) 10o Max 0.89 (.035) Recommended Pad Sizes Ultra-Mini DYAD™ SMT 2.54 (0.100) 3.02 (0.120) 6.76 (0.270) Dimensions mm inches Rev. 2 www.clare.com 3 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Switch Division 4315 Earth City Expresssway St. Louis, MO 63045 Tel: 1-314-770-1832 Fax: 1-314-770-1812 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: PB-UM2-R2 ©Copyright 2000, Clare, Inc. Ultra-Mini Dyad™, Mini Dyad™, and Dyad® are trademarks of Clare, Inc. All rights reserved. Printed in USA. 3/7/01