F E D C B A c b NOTES: 47,7 +- 0,3 0 POS. 1 (5:1) D 8,6 +- 0,4 0,3 c 3,6 +- 0,25 0 6 +- 0,18 0,12 0,4 11,5 +- 0,3 12,23 +- 0,4 0,3 D 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. REAR SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1; PCB THICKNESS 1,6mm 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB-HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 14. CONNECTOR IS PART MARKED: 15-00050o CONEC ABC 8,23 +- 0,25 0 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR c 33,32 +- 0,13 0,12 C POS. 10 C 25,14 +- 0,23 0,02 21,1 +- 0,3 0 POS. 19 10° n0,6 `0,05 (26x) c SEALING COMPOUND B B O-RING 15-00050o CONEC ABC 4,6 4-40 UNC b 9,4 SEE NOTE 14 SW 4,8 4-40 UNC c TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. tolerance dim. in mm Ä 3435 23.09.09 HS 3xb Ä 3129 26.09.08 HS a Origin rev. description D see notes A title: name drawn 09.09.08 Schmidt D-SUB MALE HD appd. 15.09.08 Fischer 26pos. SOLDER PIN STRAIGHT with rear spacer clip and hexlocking screw dwg no: Inventor 10 DIN- d-old part no: name C A3 sh: 1 15K1A265 R date 2:1 (5:1) date norm 5xc scale: material: B 15-00050 o (see note 9) b A F D E D C B A D P.C.B. HOLE DRILLINGS 19,431 `0,05 n3,1 `0,1 (2x) 9,652 `0,1 1 7,008 `0,03 1,98 `0,1 1,143 `0,1 1,98 `0,1 2,286 `0,1 + 0,1 n0,9 - 0 (26x) 33,32 +- 0,13 0,12 C RECOMMENDED PANEL CUT-OUT C b 28,8 `0,1 i 0,26 A 11,4 `0,1 B ,4 ` R3 n3,1 `0,05 (2x) B 10° `1° B i 0,26 B 3 0,1 TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 33,32 `0,1 A tolerance dim. in mm a Origin rev. description D 26.09.08 A title: name drawn 09.09.08 Schmidt P.C.B. HOLE DRILLINGS appd. 15.09.08 Fischer PANEL CUT-OUT D-SUB Male 26pos HD Solder pin straight dwg no: Inventor 10 DIN- d-old Ä 3129 HS part no: name C A3 sh: 2 15K1A265 R date 5:1 see sheet 1 date norm 1xb scale: material: B see sheet 1 A