Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Features ․P-LCC-4 package. ․White package and black surface. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain with RoHS compliant version Descriptions ․The 67-03 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Type RS Material AlGaInP GH InGaN Brilliant Green BH InGaN Blue Resin Color Brilliant Red Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Package Outline Dimensions CL 1 2 2.8±0.2 CL 4 0.7±0.1 2.2±0.1 3 3 4 2 1 3.5±0.2 2.8±0.2 0.15±0.05 0.8±0.1 1.9±0.2 2.4±0.1 0.5±0.1 3.2±0.2 2.7±0.2 For reflow soldering(propose) 1.6 1.8 0.7 1.8 2.2 0.8±0.1 Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimension = ±0.1mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Peak Forward Current (Duty 1/10 @ 1KHz) Power Dissipation Total Power Dissipation Electrostatic Discharge(HBM) IF IFP Pd RS 50 GH 30 BH 30 RS 100 GH 100 BH 100 RS 120 GH 110 BH 110 Ptot ESD mA mA mw 340 RS 2000 GH 1000 BH 1000 mw V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol Iv Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Typ. Max. RS 450 ----- 715 GH 900 ----- 1420 BH 225 ----- 450 ----- 120 ----- RS ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- RS 617 ----- 627 GH 520 ----- 530 BH 465 ----- 470 RS ----- 20 ----- GH ----- 35 ----- BH ----- 35 ----- RS ----- 2.0 2.4 GH ----- 3.5 4.0 BH ----- 3.5 4.0 2θ1/2 Viewing Angle Peak Wavelength Min. λp λd △λ VF Unit Condition mcd IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1 nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Bin Range of Luminous Intensity Symbol RS GH IV BH Bin Code Min. Max. U1 450 565 U2 565 715 V2 900 1120 W1 1120 1420 S2 225 285 T1 285 360 T2 360 450 Bin Code Min. Max. 1 617 622 2 622 627 X 520 525 Y 525 530 X 465 470 Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Bin Range of Dominant Wavelength Symbol RS λd GH BH Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1 nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Typical Electro-Optical Characteristics Curves (RS) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 50 Forward Current IF (mA) Relative luminous intensity (%) 100 75 50 25 0 550 600 650 700 Wavelength λ (nm) 40 30 20 10 0 1.2 750 2.0 2.4 2.8 1000 100 10 1000 f=1KHz Duty=1/10 100 10 0 20 40 60 80 100 1 0 10 Ambient Temperature Ta (°C) 2 1 10 10 Forward Current I F (mA) Radiation Diagram Forward Current Derating Curve 0° 10° 60 Forward Current IF (mA) 3.0 Relative Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (%) Relative luminous intensity (%) 1.6 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 3 10 Ta=25°C 20° 30° 50 40 40° 1.0 30 0.9 50° 20 0.8 60° 10 0.7 0 0 20 40 60 80 100 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Typical Electro-Optical Characteristics Curves (GH) Forward Current vs. Forward Voltage Ta=25°C IF (mA) 100 Forward Current 75 50 25 0 400 1000 450 500 550 Wavelength λ (nm) 40 30 20 10 0 2.4 2.6 2.8 3.2 3.6 100 10 Relative Luminous Intensity vs. Forward Current Ta=25°C 1000 f=1KHz Duty=1/10 100 10 1 0 10 0 20 40 60 80 100 2 1 10 10 Forward Current Ambient Temperature Ta(°C) IF(mA) Radiation Diagram IF (mA) 0° Forward Current 4.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 50 600 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 10° 60 Ta=25°C 20° 30° 50 40 40° 1.0 30 0.9 50° 20 0.8 60° 10 0.7 0 0 20 40 60 80 100 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Typical Electro-Optical Characteristics Curves (BH) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C IF (mA) Forward Current 75 50 25 0 400 1000 450 500 550 Wavelength λ (nm) 30 20 10 0 10 0 20 40 2.8 2.6 3.2 1000 f=1KHz Duty=1/10 100 10 1 0 10 60 80 100 1 2 10 3 10 10 Forward current I F (mA) Radiation Diagram Forward Current Derating Curve 0° 10° 60 Ta=25°C 20° 30° 50 F I (mA) 4.0 Relative Luminous Intensity vs. Forward Current Ta=25°C Ambient temperature Ta (°c) Forward Current 3.6 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1 -40 -20 40 600 100 Ta=25°C 50 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) 100 40 40° 1.0 30 0.9 50° 20 0.8 60° 10 0.7 0 0 20 40 60 80 100 Ambient temperature Ta (°c) 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Label Explanation Pb CAT: Luminous Intensity Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS HUE: Dom. Wavelength Rank XXXXXXXXXXXXX REF: Forward Voltage Rank CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerances unless dimension ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel. + Note: Tolerances unless dimension ±0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock ∫ 10 sec L : -10℃ 5min 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 72 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 13 of 13 Device No.: DSE-0000581 Prepared date: 11-Dec-2008 Prepared by: Josh Chou