KYL KYL-600L

Shenzhen KYL Communication Equipment Co., Ltd
KYL-600L Wireless audio Module
User Manual
Shenzhen KYL Communication Equipment Co., Ltd
Address: C3705-3707, Huangdu Square, Exhibition Center South, Yitian Road,
Futian District, Shenzhen, Guangdong, China 518048
Tel: 86-755-82943662
Fax: 86-755-83408785
SkypeKYL-Sunny
Yahoo: [email protected]
MSN: [email protected]
Email: [email protected]
Website: http://www.rf-data.com
Fax: 86-755-83408785
[email protected],com
www.rf-data.com
Shenzhen KYL Communication Equipment Co., Ltd
Before using the product, please read this use manual carefully. Any questions,
welcome to contact us.
About KYL-600L:
KYL-600L Audio radio module, adopts double VCO structure, high stability TXCO.
With advanced arithmetic fault-rectify system in software design, it has high stability
and reliability. This module is usually used for industry control, water conservancy,
electric, oil field management, wireless alarm so on. Moreover, we can extend its
functions and ODM products for you according to your specific application.
1. Specifications:
*
Operating Voltage: DC 5V
*
Carrier Frequency: VHF/UHF 230-400MHz
*
Interface: standard RS-232/RS-485/TTL Selectable
*
Baud Rate: 1200/2400/4800bps Selectable
*
Channel spacing: 25kHz
*
Frequency stability: ±2.5ppm
* Modulation: FFSK;
Channels: 16
*
Impedance: 50Ω
*
Transfer distance:3km([email protected]);
*
*
*
*
*
*
*
*
*
Temperature: -25~+65
Size: 70x46x12mm(without antenna port)
Weight:180g
2. Receiver:
Receiving sensibility: ≤0.25µV (12dB SINAD)
Signal-to-Noise: ≤-40dB
Adjacent channel selectivity: ≥70dB
Inter-modulation rejection: ≥65dB
Clutter and images rejection: ≥70dB
Receiving current: 50mA
*
Audio Output power: 0.5W8Ω10 distortion
*
Receiving distortion: ≤3
3. Transmitter:
*
*
*
*
*
*
*
*
RF power: ≤500mW 1W/2W customized
Transmitting current: 300mA
Modulation: FFSK
Audio distortion: ≤3%
Frequency deviation: ±5.0kHz
Adjacent channel power: ≥70dB
Transmitter start up time: ≤50m
Surplus Frequency Modulation: ≤-40dB
*
*
*
Modulation distortion: ≤3
Modulation sensibility: 5mV
Transmission distance: 3Km
Fax: 86-755-83408785
[email protected],com
www.rf-data.com
Shenzhen KYL Communication Equipment Co., Ltd
*
Volts D.C.: 5V (12V optional)
*
4. Features of KYL-600L:
1) Design based on the special use of the wireless voice transmission in the industrial
automation field.
2) High stability, good reliability and low power consumption
3) Standard connection: RS-232/485/TTL
4) Facility for installation and maintenance, Flexible
networking configuration,
suitable for the field of multiple point but decentralization and complex geography
environment.
5) Metal shell, good shielding performance, providing frequency passage.
6) Providing many MODEM communication protocols
7) To adapt different user structure, we can develop various size modules and offer
sufficient technology support for client use the module and second development for
free.
5. Size
Product dimension: 70x46x12mm
Antenna connection: TNC (SMA) -50Ω
Interface definition:
6. Applications:
*
Industrial automatic control and remote control
*
Wireless data acquisition and SCADA
*
Environment monitoring systems
*
AMR Automatic Meter Reading
*
Wireless alarm and security systems
*
Building automation, security, wireless monitoring and control of room
equipment, Access Control System;
*
Wireless data transmission, automatic data collection system;
*
Low power telemetry
*
Wireless conference voting system;
*
Sports training & competition;
*
Wireless POS, PDA wireless smart terminal;
*
Electronic bus station and intelligent traffic;
*
RF transmitter Wireless electronic display screen and queuing
Fax: 86-755-83408785
[email protected],com
www.rf-data.com
Shenzhen KYL Communication Equipment Co., Ltd
machine;
*
Wireless telemetry Charging for parking, parking lot;
*
Wireless modem Automobile inspection and four-wheel orientation;
*
Wireless sensor Industrial wireless remote control and air conditioning
remote controller;
*
Data communication used for railway, oil field, dock and army.
*
LED display in thruway and public places
*
Point to multi-point wireless network, wireless on-the-spot bus and
automatic data collection system;
*
7. The installing schematic
8. Notice
1) The antenna should be away from the power supply if use the switch power,
because the transmitting of the antenna may affect the normal work of the switch
power. When the transmission happen fault, checking the power voltage whether
interfered from the antenna is one way of eliminating fault.
2) Use the min. grain wave and high anti-jamming switch power or batteries
3) The power capacity must meet D.C. 5~12V,more than 800mA output current
4) The space between the experiments Radio should be more than 5m. The antenna
should span on the high to increase the distance of electric wave. It is important for
using shortwave communication equipment in the city.
5) After connecting the antenna to the Radio, the space between the Radios should
more than 10m, so avoid signal backup.
6) The antenna plywood should nip in the connection inside the antenna, but
not nip the antenna projectile, so avoiding the performance of the antenna.
7) High frequency cable don’t come down directness, circle a circuit and fix up it
on the frame for the best.
9. Standard configuration and Antenna configuration
i: Standard configuration:
* One KYL-600L RF module
* A 9pin flat Connection Line
Fax: 86-755-83408785
[email protected],com
www.rf-data.com
Shenzhen KYL Communication Equipment Co., Ltd
* A whip antennaabout 10cm
ii: Antenna configuration:
Many appropriative antennas for low power RF modules are selected to meet
different user’s antenna configuration. Please ask our Sales office for further
information about the antenna’s dimension and performance. The main options of
antennas are exterior flabelliform rubber antenna with helical SMA joint, small
osculum antenna, small rod antenna and elbow antenna. If the user has special
demands on antennas, we can design and produce individually.
a. Helical SMA antennas: KYL-ANT-S868-5-SMA
b. Elbow antenna: KYL-ANT-S433L-10-ESMA
c. Small rod antenna: KYL-ANT-S433-4-RSMA
d. Small osculum antenna: KYL-ANT-O433S-300H1.5-SMA
Fax: 86-755-83408785
[email protected],com
www.rf-data.com