MSK MSK4890

ISO-9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
600V/300A
SCR/REGEN PEM
4707 Dey Road Liverpool, N.Y. 13088
4890
(315) 701-6751
FEATURES:
MIL-PRF-38534 CERTIFIED
SCR/REGEN Topology
600V Rated Voltage
300A Continuous IGBT Current
Internal Zener Clamps on Gate
Proprietary Encapsulation Provides Near Hermetic Performance
MIL-PRF-38534 Screening Available (Modified)
Light Weight Domed ALSIC Baseplate
Robust Mechanical Design for Hi-Rel Applications
Ultra-Low Inductance Internal Layout
Withstands 96 Hours HAST and Thermal Cycling (-55°C to +125°C)
DESCRIPTION:
The MSK 4890 is one of a family of plastic encapsulated modules (PEM) developed specifically for use in military,
aerospace and other severe environment applications. The SCR/REGEN configuration and 600 volt/300 amp rating make it
ideal for use in high current motor drive and inverter brake applications. The Aluminum Silicon Carbide (AlSiC) baseplate
offers superior flatness and light weight; far better than the copper or copper alloys found in most high power plastic
modules. The high thermal conductivity materials used to construct the MSK 4890 allow high power outputs at elevated
baseplate temperatures. Our proprietary coating, SEES™ - Severe Environment Encapsulation System - protects the internal
circuitry of MSK PEM's from moisture and contamination, allowing them to pass the rugged environmental screening
requirements of military and aerospace applications. MSK PEM's are also available with industry standard silicone gel
coatings for a lower cost option.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Motor Drives
Inverters
1
Rev. B
8/05
7
ABSOLUTE MAXIMUM RATING
VCE
VGE
I CC
I CC
IT
ITSM
IF
I FP
VCASE
TST
TJ
TC
Collector to Emitter Voltage
600V
Gate to Emitter Voltage
±20V
Collector Current (Continuous)
300A
Collector Current Pulsed (1mS)
600A
SCR Forward Current (Continuous)
220A
SCR Peak Surge Current (1/2 Cycle 60Hz) 1100A
REGEN Diode Current (Continuous)
50A
REGEN Diode Current Pulsed (1mS)
100A
Case Isolation Voltage
2500V
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
-55°C to +125°C
Storage Temperature Range
150°C
Junction Temperature
Case Operating Temperature Range
-55°C to +125°C
MSK 4890H/E
-40°C to +85°C
MSK 4890
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
ELECTRICAL SPECIFICATIONS
NOTES:
Guaranteed by design but not tested. Typical parameters are representative of actual device performance but are for reference only.
Industrial grade and "E" suffix devices shall be tested to subgroup 1 unless otherwise specified.
Military grade devices ("H" suffix) shall be 100% tested to subgroups 1, 2 and sample tested to subgroup 3.
Subgroups 4, 5 and 6 testing available upon request.
Subgroup 1, 4 TA = +25°C
2, 5 TA = +125°C
3, 6 TA = -55°C
6 VGE=15V unless otherwise specified.
7 Continuous operation at or above absolute maximum ratings may adversly effect the device performance and/or life cycle.
1
2
3
4
5
2
Rev. B 8/05
TYPICAL PERFORMANCE CURVES
3
Rev. B
8/05
SCREENING CHART
4
Rev. B
8/05
MECHANICAL SPECIFICATIONS
WEIGHT = 200 GRAMS MAX.
ORDERING INFORMATION
MSK4890 H
SCREENING
BLANK=INDUSTRIAL; E=EXTENDED RELIABILITY;
H=MIL-PRF-38534 CLASS H (MODIFIED)
GENERAL PART NUMBER
THE ABOVE EXAMPLE IS A MILITARY SCREENED MODULE.
M.S. Kennedy Corp.
4707 Dey Road Liverpool, New York 13088
Phone (315) 701-6751
FAX (315) 701-6752
www.mskennedy.com
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make
changes to its products or specifications without notice, however, and assumes no liability for the use of its products.
Please visit our website for the most recent revision of this datasheet.
5
Rev. B
8/05