RU30230R N-Channel Advanced Power MOSFET MOSFET Features Pin Description • 30V/230A, RDS (ON) =2mΩ (Typ.) @ VGS=10V,IDS=75A RDS (ON) =2.5mΩ (Typ.) @ VGS=4.5V,IDS=60A • Ultra Low On-Resistance TO-220 TO-220F TO-263 TO-247 • Fast Switching and Fully Avalanche Rated • 100% avalanche tested • 175°C Operating Temperature • Lead Free and Green Available Applications • DC/DC Converters • UPS N-Channel MOSFET Absolute Maximum Ratings Symbol Parameter Rating Unit Common Ratings (TC=25°C Unless Otherwise Noted) VDSS Drain-Source Voltage 30 VGSS Gate-Source Voltage ±20 Maximum Junction Temperature 175 °C -55 to 175 °C 230 A TJ TSTG IS Storage Temperature Range Diode Continuous Forward Current TC=25°C V Mounted on Large Heat Sink IDP 300μs Pulse Drain Current Tested ID Continuous Drain Current PD RθJC Maximum Power Dissipation Thermal Resistance-Junction to Case ① TC=25°C 920 TC=25°C 230 TC=100°C TC=25°C 160 300 TC=100°C 150 A ② ② A W 0.5 °C/W 1120 mJ Drain-Source Avalanche Ratings EAS ③ Avalanche Energy, Single Pulsed Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 www.ruichips.com RU30230R Electrical Characteristics Symbol (TC=25°C Unless Otherwise Noted) Parameter Test Condition RU30230R Min. Typ. Max. Unit Static Characteristics BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current VGS(th) IGSS RDS(ON) ④ VGS=0V, IDS=250µA V 30 VDS= 30V, VGS=0V 1 TJ=85°C Gate Threshold Voltage VDS=VGS, IDS=250µA Gate Leakage Current VGS=±20V, VDS=0V 30 1 2 µA 3 V ±100 nA VGS= 10V, IDS=75A 2 3 mΩ VGS= 4.5V, IDS=60A 2.5 5 mΩ 1.2 V Drain-Source On-state Resistance Diode Characteristics VSD ④ Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge ISD=75 A, VGS=0V ISD=75A, dlSD/dt=100A/µs 90 ns 115 nC 2.0 Ω ⑤ Dynamic Characteristics RG Gate Resistance VGS=0V,VDS=0V,F=1MHz Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance td(ON) Turn-on Delay Time tr Turn-on Rise Time td(OFF) Turn-off Delay Time tf VGS=0V, VDS=15V, Frequency=1.0MHz 6340 pF 1170 640 25 VDD=15V, RL=0.2Ω, IDS=75A, VGEN= 10V, RG=6Ω Turn-off Fall Time 160 ns 140 115 ⑤ Gate Charge Characteristics Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge Notes: 130 VDS=24V, VGS= 10V, IDS=75A 30 170 nC 40 Pulse width limited by safe operating area. Calculated continuous current based on maximum allowable junction temperature. Package limitation current is 75A. Limited by TJmax, IAS =67A, VDD = 24V, RG = 50Ω , Starting TJ = 25°C. Pulse test ; Pulse width≤300µs, duty cycle≤2%. Guaranteed by design, not subject to production testing. Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 2 www.ruichips.com RU30230R Typical Characteristics Drain Current Ptot - Power (W) ID - Drain Current (A) Power Dissipation Tj - Junction Temperature (°C) Tj - Junction Temperature (°C) Safe Operation Area ID - Drain Current (A) Normalized Effective Transient Thermal Transient Impedance VDS - Drain-Source Voltage (V) Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 Square Wave Pulse Duration (sec) 3 www.ruichips.com RU30230R Typical Characteristics Drain-Source On Resistance ID - Drain Current (A) RDS(ON) - On Resistance (mΩ) Output Characteristics VDS - Drain-Source Voltage (V) ID - Drain Current (A) Gate Threshold Voltage RDS(ON) - On - Resistance (m) Normalized Threshold Voltage Drain-Source On Resistance VGS - Gate-Source Voltage (V) Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 Tj - Junction Temperature (°C) 4 www.ruichips.com RU30230R Typical Characteristics Source-Drain Diode Forward IS - Source Current (A) Normalized On Resistance Drain-Source On Resistance Tj - Junction Temperature (°C) VSD - Source-Drain Voltage (V) Gate Charge C - Capacitance (pF) VGS - Gate-Source Voltage (V) Capacitance VDS - Drain-Source Voltage (V) Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 QG - Gate Charge (nC) 5 www.ruichips.com RU30230R Avalanche Test Circuit and Waveforms Switching Time Test Circuit and Waveforms Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 6 www.ruichips.com RU30230R Ordering and Marking Information RU30230 Package (Available) R : TO-220; S: TO-263 ; Q: TO-247 Operating Temperature Range C : -55 to 175 ºC Assembly Material G : Green & Lead Free Packaging T : TUBE TR : Tape & Reel Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 7 www.ruichips.com RU30230R Package Information TO-220FB-3L SYMBOL MM INCH MM SYMBOL INCH MIN NOM MAX MIN NOM MAX A 4.40 4.57 4.70 0.173 0.180 0.185 Øp1 MIN NOM MAX MIN NOM MAX 1.40 1.50 1.60 0.055 0.059 A1 1.27 1.30 1.33 0.050 0.051 0.052 e 0.063 A2 2.35 2.40 2.50 0.093 0.094 0.098 e1 b 0.77 - 0.90 0.030 - 0.035 H1 6.40 6.50 6.60 0.252 0.256 0.260 b2 1.23 - 1.36 0.048 - 0.054 L 12.75 - 13.17 0.502 - 0.519 - - 3.95 - - 0.156 2.54BSC 0.1BSC 5.08BSC 0.2BSC C 0.48 0.50 0.52 0.019 0.020 0.021 L1 D 15.40 15.60 15.80 0.606 0.614 0.622 L2 D1 9.00 9.10 9.20 0.354 0.358 0.362 Øp 3.57 3.60 3.63 0.141 0.142 0.143 DEP 0.05 0.10 0.20 0.002 0.004 0.008 Q 2.73 2.80 2.87 0.107 0.110 0.113 E 9.70 9.90 10.10 0.382 0.389 0.398 θ1 5° 7° 9° 5° 7° 9° E1 - 8.70 - - 0.343 - θ2 1° 3° 5° 1° 3° 5° E2 9.80 10.00 10.20 0.386 0.394 0.401 2.50REF. 0.098REF. ALL DIMENSIONS REFER TO JEDEC STANDARD DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 8 www.ruichips.com RU30230R TO-263-2L SYMBOL MM INCH MM MIN NOM MAX MIN NOM MAX SYMBOL INCH MIN NOM MAX MIN NOM MAX A 4.40 4.57 4.70 0.173 0.180 0.185 L 2.00 2.30 2.60 0.079 0.090 0.102 A1 0 0.10 0.25 0 0.004 0.010 L3 1.17 1.27 1.40 0.046 0.050 0.055 A2 2.59 2.69 2.79 0.102 0.106 0.110 L1 - - 1.70 - - 0.067 b 0.77 - 0.90 0.030 - 0.035 L4 0.25BSC 0.01BSC b1 1.23 - 1.36 0.048 - 0.052 L2 2.50REF. 0.098REF. c 0.34 - 0.47 0.013 - 0.019 θ 0° - 8° 0° - 8° C1 1.22 - 1.32 0.048 - 0.052 θ1 5° 7° 9° 5° 7° 9° D 8.60 8.70 8.80 0.338 0.343 0.346 θ2 1° 3° 5° 1° 3° 5° E 10.00 10.16 10.26 0.394 0.4 0.404 DEP 0.05 0.10 0.20 0.002 0.004 0.008 Øp1 1.40 1.50 1.60 0.055 0.059 0.063 15.50 0.579 e H 2.54BSC 14.70 15.10 0.1BSC 0.594 0.610 ALL DIMENSIONS REFER TO JEDEC STANDARD DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 9 www.ruichips.com RU30230R TO-247 SYMBOL MM INCH MM MIN MAX MIN MAX SYMBOL MIN INCH MAX MAX A 4.850 5.150 0,191 0.200 E2 A1 2.200 2.600 0.087 0.102 L 40.900 41.300 1.610 1.626 B 1.000 1.400 0.039 0.055 L1 24.800 25.100 0.976 0.988 b1 2.800 3.200 0.110 0.126 L2 20.300 20.600 0.799 0.811 b2 1.800 2.200 0.071 0.087 Φ 7.100 7.300 0.280 0.287 c 0.500 0.700 0.020 0.028 e c1 1.900 2.100 0.075 0.083 H D 15.450 15.750 0.608 0.620 h E1 3.500 REF. 3.600 REF MIN 5.450 TYP 5.980 REF. 0.000 0.300 0.142 REF 0.215 TYP 0.235 REF. 0.000 0.012 0.138 REF. ALL DIMENSIONS REFER TO JEDEC STANDARD DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 10 www.ruichips.com RU30230R Customer Service Worldwide Sales and Service: [email protected] Technical Support: [email protected] Investor Relations Contacts: [email protected] Marcom Contact: [email protected] Editorial Contact: [email protected] HR Contact: [email protected] Legal Contact: [email protected] Shen Zhen RUICHIPS Semiconductor CO., LTD Room 501, the 5floor An Tong Industrial Building, NO.207 Mei Hua Road Fu Tian Area Shen Zhen City, CHINA TEL: (86-755) 8311-5334 FAX: (86-755) 8311-4278 E-mail: [email protected] Copyright Ruichips Semiconductor Co., Ltd Rev. B– JUN., 2011 11 www.ruichips.com