SBH 3020 ... SBH 3060 Type Repetitive peak reverse voltage Surge peak reverse voltage Max. reverse recovery time Max. forward voltage Max. forward voltage VRRM V VRSM V trr1) ns VF2) V VF3) V SBH 3020 20 20 - 0,43 0,6 SBH 3030 30 30 - 0,43 0,6 SBH 3040 40 40 - 0,43 0,6 SBH 3045 45 45 - 0,43 0,6 SBH 3050 50 50 - 0,53 0,7 High temperature schottky barrier diodes SBH 3060 60 60 - 0,53 0,7 Forward Current: 30 A Symbol Reverse Voltage: 20 to 60 V Ta = 25 °C, unless otherwise specified Axial Lead Diode SBH 3020 ... SBH 3060 Preliminary Data Features Absolute Maximum Ratings Conditions Values Unit IFAV R-load, 4), Ta = 50 °C 30 A IFRM f > 15 Hz, 4) 90 A IFSM half sinus-wave Ta = 25 °C 700 A 2450 A²s tp = 10 ms tp = 8.3 ms A tp = 10 ms • Max. solder temperature: 260°C • Plastic material has UL classification 94V-0 i2t Tj Operating junction temperature -50 ... +175 °C Typical Applications* Tj DC forward (bypass) mode 5) -50 ... +200 °C Tstg Storage temperature -50 ... +175 °C • Designed as Bypass Diodes for Solar Panels • Protection application Mechanical Data • Plastic case: 8 x 7,5 [mm] • Weight approx.: 2,4 g • Terminals: plated terminals solderable per MIL-STD-750 • Mounting position: any • Standard packaging: 500 pieces per ammo or 1000 pieces per reel Footnotes 1) IF = - A, IR = - A, IRR = - A 2) I = 5 A, T = 25 °C F j 3) IF = 30 A, Tj = 25 °C 4) Valid, if leads are kept at TA at a distance of 0 mm from case 5) Max. junction temperature Tj ≤175 °C in reverse mode (VR = 80% VRRM) in reverse mode, Tj≤ 200 °C in bypass mode 6) Thermal resistance from junction to lead/ terminal at distance 0 mm from case Ta = 25 °C tp = 8.3 ms A²s Characteristics Symbol Conditions min. typ. max. Unit Ta = 25 °C, unless otherwise specified IR Tj = 25 °C, VR = VRRM IR Tj = 100 °C, VR = VRRM Cj at 1 MHz and applied reverse voltage of 4 V - pF ERSM L = 60 mH, Tj = 25 °C, inductive load switched off - mJ Rth(j-a) 4) - K/W Rth(j-L) 6) 2.5 K/W 150 µA mA Diode © by SEMIKRON Rev. 2 – 06.05.2011 1 SBH 3020 ... SBH 3060 Fig.1: Forward characteristics (typical value) Fig.2: Rated forward current vs. ambient temperature 1) Fig.3: Thermal resistance versus distance from case Case: 8 x 7,5 [mm] 2 Rev. 2 – 06.05.2011 © by SEMIKRON SBH 3020 ... SBH 3060 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. © by SEMIKRON Rev. 2 – 06.05.2011 3