GULFSEMI BYV27-600

BYV27-600
SINTERED GLASS JUNCTION
ULTRAFAST AVALANCHE RECTIFIER
VOLTAGE:
:600V
CURRENT: 1.6A
FEATURE
SOD-57
Glass passivated
High maximum operating temperature
Low leakage current
Excellent stability
Guaranteed avalanche energy absorption capability
MECHANICAL DATA
Case: SOD-57 sintered glass case
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Polarity: color band denotes cathode end
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
BYV27-600
units
VRRM
VRMS
VDC
600
V
420
V
600
V
Reverse avalanche breakdown voltage
at IR = 0.1 mA
V(BR)R
675min
V
Maximum Average Forward Rectified Current 3/8”
lead length at Ttp =85°C
Non-repetitive Peak Forward Current at t=10ms half
sine wave
Maximum Forward Voltage at Forward Current 2.0A
Non-repetitive peak reverse avalanche energy
(Note 1)
IFAV
1.6
A
IFSM
40
A
VF
1.25
V
ERSM
20
mJ
IR
5.0
150.0
µA
50
nS
65
pF
100
K/W
-65 to +175
°C
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum DC Reverse Current
at rated DC blocking voltage
Maximum Reverse Recovery Time
Ta =25°C
Ta =165°C
(Note 2)
Diode Capacitance
(Note 3)
Typical Thermal Resistance
(Note 4)
Storage and Operating Junction Temperature
Trr
Cd
Rth(ja)
Tstg, Tj
Note:
1. R=400mA; Tj=Tjmax prior to surge; inductive load switched off
2. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
3. Measured at 1.0 MHz and applied reverse voltage of 0Vdc
4. Device mounted on an epoxy-glass printed-circuit board, 1.5mm thick; thickness of Cu-layer≥40μm
Rev.A1
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES BYV27-600
Rev.A1
www.gulfsemi.com