THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS ABSOLUTE M AXIMUM RATING S PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -55 - 125 °C -0.5 - 7.0 Vdc MINIMUM NOMINAL MAXIMUM UNITS NOTE 16.384 -20 0 - MHz ppm °C 1 Vdc Storage Temperature Supply Voltage CW 0626 FPLD54TEG 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK (Vcc) OPERATING SPECIFIC ATIONS NOTE TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) - 200 20 70 Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS SSB Phase Noise at 10Hz offset - -45 - dBc/Hz SSB Phase Noise at 100Hz offset - -80 - dBc/Hz SSB Phase Noise at 1KHz offset - -110 - dBc/Hz SSB Phase Noise at 10KHz offset - -135 - dBc/Hz SSB Phase Noise at 100KHz offset - -145 - dBc/Hz NOMINAL MAXIMUM - UNITS NOTE Vdc 2 1.68 Vdc 2 INPUT CHARACTERISTICS FPLD54TEG DESCRIPTION The Connor-Winfield FPLD54TEG is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±20ppm overall stability. Operating at 3.3V supply voltage, the FPLD54TEG provides LVPECL Differential Outputs with Enable/Disable function. TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) MINIMUM 2.275 Enable Input Voltage (Low) (Vil) - - FEATURES 3.3V OPERATION LVPECL OUTPUT CHARACTERISTICS PARAMETER TABLE 4.0 MINIMUM NOMINAL MAXIMUM UNITS NOTE 2.275 45 50 50 1.68 55 Ohms Vdc Vdc % 3 Rise / Fall Time 20% to 80% - - 1 ns Startup Time - - 10 ms LOAD Voltage (High) (Low) (Voh) (Vol) Duty Cycle 4 LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE FUNCTION LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: ±20ppm TEMPERATURE RANGE: 0 to 70°C PACKAG E CHARACTERISTICS Package TABLE 5.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. PROCESS RECOMMENDATIONS TABLE 6.0 Solder Process Wash SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE See solder profile page2. Ultrasonic cleaning is not recommended. Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V ORDERING INFORMATION FPLD54TEG - 155.52MHz CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: INT Ec235 PAGE 1 OF 2 REV: 00 DATE: 06/28/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline CW FPLD54TEG 155.52M Suggested Pad Layout Dimensional Tolerance: ±.005” (.127mm) Solder Profile Output Waveform Temperature 260°C 260°C 220°C 180°C 80% 150°C 120°C 50% 0 20% 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. Pin Connections Test Circuit ENABLE / DISABLE N/C GROUND Q OUTPUT Q OUTPUT Vcc 2 E/D N/C Vcc = Vcc2 = 3.3Vdc Specifications subject to change without notice. DATA SHEET #: INT Ec235 PAGE 2 OF 2 REV: 00 DATE: 06/28/06 aCopyright 2001 Connor-Winfield all rights reserved.