DATATRONICS DR354-1-113-T

April 4, 2007
SMD INDUCTOR DR354-1 SERIES
Features
z
z
z
z
z
SMD Chip Inductor, Low Profile
Suitable for High Frequency Application
Inductance Range from 1.6nH to 390nH
Operating Temp. -40°C to +125°C
Tinned Leads with Leaded Solder is Available (note 4)
ELECTRICAL SPECIFICATIONS AT 25ºC
900MHz
Part Number
L(nH)
@250MHz
Tolerance
DR354-1-162-T
DR354-1-182-T
DR354-1-362-T
DR354-1-392-T
DR354-1-432-T
DR354-1-472-T
DR354-1-512-T
DR354-1-682-T
DR354-1-752-T
DR354-1-872-T
DR354-1-952-T
DR354-1-103-T
DR354-1-113-T
DR354-1-123-T
DR354-1-153-T
DR354-1-163-T
DR354-1-183-T
DR354-1-223-T
DR354-1-243-T
DR354-1-273-T
DR354-1-303-T
DR354-1-333-T
DR354-1-363-T
DR354-1-393-T
DR354-1-433-T
DR354-1-473-T
DR354-1-563-T
DR354-1-683-T
DR354-1-723-T
DR354-1-823-T
DR354-1-104-T
DR354-1-114-T
DR354-1-124-T
DR354-1-154-T
DR354-1-184-T
DR354-1-224-T
DR354-1-274-T
DR354-1-390-K
1.6
1.8
3.6
3.9
4.3
4.7
5.1
6.8
7.5
8.7
9.5
10
11
12
15
16
18
22
24
27
30
33
36
39
43
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
20, 10
20, 10
20, 10
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
10, 5, 2
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
20, 10, 5
10
L Typ.
1.67
1.63
3.72
3.95
4.32
4.72
4.93
6.75
7.70
8.86
9.70
10.0
11.0
12.3
15.4
16.2
18.7
22.8
24.5
29.2
31.4
36.0
39.4
42.7
14.0
52.2
62.5
80.5
82.0
96.2
124
138
166
250
305
480
980
Q Typ.
1.7GHz
L Typ.
49
1.65
35
1.66
53
3.71
49
3.96
50
4.33
47
4.75
47
4.95
60
7.10
60
7.82
62
9.32
59
9.92
66
10.6
53
11.5
72
13.5
64
16.8
55
17.3
70
21.4
73
26.1
45
28.7
74
34.6
47
39.9
67
49.5
47
52.7
60
60.2
44
64.9
62
77.2
52
97.0
54
168
53
135
54
177
49
43
39
25
22
8
4
22 Min @100 MHz
Q Typ.
63
50
65
67
70
57
56
81
65
68
61
83
56
83
89
52
69
71
39
65
28
42
24
40
21
35
26
21
20
21
-
SRF
(MHz)
Min.
12500
12500
5900
6900
5900
5800
5700
5800
4800
4600
5400
4800
4000
4000
4000
3300
3100
3000
2650
2800
2250
2300
2080
2200
2000
2000
1900
1700
1700
1700
1400
1350
1300
990
990
900
520
400
DCR
(Ohm)
Max.
0.030
0.045
0.063
0.080
0.063
0.116
0.140
0.110
0.106
0.109
0.135
0.130
0.086
0.130
0.170
0.104
0.170
0.190
0.135
0.220
0.144
0.220
0.250
0.250
0.280
0.280
0.310
0.340
0.490
0.540
0.580
0.610
0.650
0.920
1.250
1.900
2.300
2.2
INDUCTANCE TOLERANCE: WHEN ORDERING, PLEASE SPECIFY THE TOLERANCE.
-T (M=±20%, K=±10%, J=±5%, G=±2%)
DATATRONIC: 28151 Highway 74, Romoland, CA 92585
Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.
Idc
(A)
Max.
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.700
0.600
0.600
0.600
0.600
0.600
0.600
0.600
0.600
0.600
0.400
0.400
0.400
0.300
0.300
0.280
0.240
0.200
0.170
0.150
April 4, 2007
MECHANICAL OUTLINES
Q VS FREQUENCY RESPONSE
Ls VS FREQUENCY RESPONSE
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance ±0.1mm, unless other specified
3. Tape and reel quantity, 4000 pcs/reel
4. For non-RoHS parts replace DR prefix with 42- (e.g. DR354-1 becomes 42-354-1)
5. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C
DATATRONIC: 28151 Highway 74, Romoland, CA 92585
Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice