Right Angle Solder Termination Connectors 57RE Series OUTLINE ・57RE series is light-weight and low cost version of 57LE series to unify end disc latches with shell and insulator with locator. ・ Metalized shell for EMI Shield ・ Intermatable with each 57, 57F, 57FE, 57JE series plug connectors. ・ UL applied (File No. E72124) SPECIFICATIONS Rated Voltage 500V AC（r.m.s.） Rated Current 3A / Contact Dielectric Withstanding Voltage 1200V AC（r.m.s.）at 1 minute Insulation Resistance 1000M Ω (min.) at 500V DC Contact Resistance 35m Ω (max.) Operating Temperature -55℃∼ 105℃ RoHS MATERIAL/FINISH ITEM 090702 Compliant Compliant MATERIAL/FINISH Insulator PBT Resin(UL94V-0) / Black Shell Steel or Brass / Ni Plating Contact Copper Alooy / Au over Ni Plating Bail Lock Stainless Steel ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 57RE Series Unit：mm ○ Standard Type (Less Ground Tab) 57RE-40360-830B-FA A FA: Lead Free B 8.13 7：Contact Area: Au(0.38 μ m）over Ni Plating Tail Area: Sn-Ag over Nickel Plating 8： Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag over Ni Plating 15.68 φ3.4 hole Contact Plating Number of Contact：14, 24, 36, 50 A B 57RE-40140- □ 30B-FA 14 44.00 36.00 57RE-40240- □ 30B-FA 24 54.78 57RE-40360- □ 30B-FA 36 67.74 57RE-40500- □ 30B-FA 50 82.85 C D E 0.50 Number of Contact 25.36 12.954 35.30 46.78 36.23 23.749 46.08 59.74 49.05 36.703 59.04 74.85 64.22 51.816 74.15 8.60 Part Number 15.40 B C D Contact No. +1 2.159 15.68 1 n 3.20 n/2 15.10 (Refer to page 5.) 12.00 2.159 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 1 0.50 D ○ With Thru-hole Ground Tab 57RE-40360-830B(D3B)-FA A FA：Lead Free B 8.13 A: Steel screw Assembled B: Less Screw Deviation (D3): Thru-hole Ground Tab M3 0.5 Thread Type 15.68 Ｍ３×０． ５ Thread Panel Mounting Screw No Digit:: Steel acrew Attached 0.50 Contact Plating 7：Contact Area: Au(0.38 μ m）over Ni Plating Tail Area: Sn-Ag over Nickel Plating 8： Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag over Ni Plating 11.30 14.90 9.10 B Number of Contact：14, 24, 36, 50 57RE-40140- □ 30B（D3 □ )-FA 14 44.00 36.00 25.36 12.954 35.30 57RE-40240- □ 30B（D3 □ )-FA 24 54.78 46.78 36.23 23.749 46.08 57RE-40360- □ 30B（D3 □ )-FA 36 67.74 59.74 49.05 36.703 59.04 57RE-40500- □ 30B（D3 □ )-FA 50 82.85 74.85 64.22 51.816 74.15 C D E C D n/2 1 n +1 2.159 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 1 (Refer to page 5.) 2 0.50 D ※ The connector as above drawing is assembled panel maounting screws. ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp Contact No. 2.159 15.68 B 3.20 A 15.10 Number of Contact 12.00 Part Number 57RE Series Unit：mm ○ With M3 0.5 Threaded Ground Tab 57RE-40360-830B(D12B)-FA A FA: Lead Free B Ｍ３×０． ５ Thread Panel Mounting Screw B: Less Screw 15.68 8.13 No Digit: Brass Screw Attached A: Brass Screw Assembled C: Steel Screw Attached D: Steel Screw Assembled Deviation B Ｍ３×０． ５Thread 0.50 11.80 Contact Plating 15.40 (D12): M3 0.5 Threaded Ground Tab M3 0.5 Thread Type 8.60 7：Contact Area: Au(0.38 μ m）over Ni Plating Tail Area: Sn-Ag over Nickel Plating 8： Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag over Ni Plating Number of Contact：14, 24, 36, 50 B C 44.00 36.00 D 57RE-40240- □ 30B（D12 □）-FA 24 54.78 46.78 36.23 23.749 46.08 57RE-40360- □ 30B（D12 □）-FA 36 67.74 59.74 49.05 36.703 59.04 57RE-40500- □ 30B（D12 □）-FA 50 82.85 74.85 64.22 51.816 74.15 1 n/2 25.36 12.954 35.30 n +1 2.159 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 1 Contact No. 2.159 E 15.68 14 A 3.20 57RE-40140- □ 30B（D12 □）-FA Contact C D 12.00 15.10 Part Number Number of 0.50 D ※ The connector as above drawing is assembled panel maounting screws. (Refer to page 5.) ○ With Threaded Board Lock / Less Bail Locks 57RE-40360-830B(D8B)-FA A B FA: Lead Free 8.13 A: Brass Screw Assembled B: Less Screw C: Steel Screw Attached D: Steel Screw Assembled Deviation (D8): Threaded Board Lock M3 0.5 Thread Type Less Spring Latch C D Contact No. 2.159 E 57RE-40140- □ 30B（D8 □）-FA 14 44.00 36.00 25.36 12.954 35.30 n/2 1 57RE-40240- □ 30B（D8 □）-FA 24 54.78 46.78 36.23 23.749 46.08 n +1 57RE-40360- □ 30B（D8 □）-FA 36 67.74 59.74 49.05 36.703 59.04 57RE-40500- □ 30B（D8 □）-FA 50 82.85 74.85 64.22 51.816 74.15 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 2 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3 0.50 D ※ The connector as above drawing is assembled panel maounting screws. (Refer to page 5.) http://www.ddknet.co.jp 2.159 15.68 D 3.20 C 15.10 B 12.00 Contact A 15.40 8.60 Number of Contact：14, 24, 36, 50 Number of 11.80 0.50 B Contact Plating 7：Contact Area: Au(0.38 μ m）over Ni Plating Tail Area: Sn-Ag over Nickel Plating 8： Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag over Ni Plating Part Number 15.68 Ｍ３×０． ５ Thread Panel Mounting Screw No Digit: Brass Screw Attached 57RE Series Unit：mm ○ With Threaded Board Lock 57RE-40360-830B(D15B)-FA A B FA: Lead Free ＃４−４０ＵＮＣ Thread 8.13 B: Less Screw Deviation 15.68 Panel Mounting Screw (D15): Threaded Board Lock #4-40UNC Thread Type B 0.50 8： Contact Area: Au(Flash) over Ni Plating 8.60 Tail Area: Sn-Ag over Ni Plating 11.80 7：Contact Area: Au(0.38 μ m）over Ni Plating Tail Area: Sn-Ag over Nickel Plating 15.40 Contact Plating Number of Contact：14, 24, 36, 50 B C 57RE-40140- □ 30B（D15 □）-FA 14 44.00 36.00 57RE-40240- □ 30B（D15 □）-FA 24 57RE-40360- □ 30B（D15 □）-FA 36 57RE-40500- □ 30B（D15 □）-FA 50 D E C 25.36 12.954 35.30 54.78 46.78 36.23 23.749 46.08 67.74 59.74 49.05 36.703 59.04 82.85 74.85 64.22 51.816 74.15 D Contact No. 2.159 1 n/2 n +1 2.159 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 2 15.68 A 3.20 Contact 15.10 Number of 12.00 Part Number 0.50 D (Refer to page 5.) 57RE-40360-830B(D29B)-FA Ａ Ｂ FA: Lead Free 8.13 15.68 Panel Mounting Screw No Digit: Brass Screw Attached A: Brass Screw Assembled B: Less Screw C: Steel Screw Attached 9.1 M3 0.5 Thread Type 14.9 0.5 Deviation (D29): Threaded Board Lock 11.3 Ｍ３×0.5 Thread Ｂ D: Steel Screw Assembled Contact Plating 7：Contact Area: Au(0.38 μ m）over Ni Plating Tail Area: Sn-Ag over Nickel Plating 8： Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag over Ni Plating Ｃ Ｄ 2.159 1 n +1 0.5 2.159 Ｄ 3.20 Contact No. n/2 12.0 15.1 15.68 Number of Contact：14, 24, 36, 50 ※ The connector as above drawing is assembled panel maounting screws. Part Number Number of Contact A B C D E 57RE-40140- □ 30B（D29 □ )-FA 14 44.00 36.00 25.36 12.954 35.30 57RE-40240- □ 30B（D29 □ )-FA 24 54.78 46.78 36.23 23.749 46.08 57RE-40360- □ 30B（D29 □ )-FA 36 67.74 59.74 49.05 36.703 59.04 57RE-40500- □ 30B（D29 □）-FA 50 82.85 74.85 64.22 51.816 74.15 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 2 (Refer to page 5.) ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 57RE Series Unit：mm ○ With Threaded Board Lock / Small Bail Locks 57RE-40360-830B(D7B)-FA Ａ FA: Lead Free Panel Mounting Screw 8.13 15.68 No Digit: Steel Screw Attached A: Steel Screw Assembled B: Less Screw Ｍ３×0.5 Thread Ｂ (D7): Threaded Board Lock M3 0.5 Thread Type 0.5 11.3 Small Bail Locks 14.9 Deviation 9.1 Contact Plating 7：Contact Area: Au(0.38 μ m）over Ni Plating Tail Area: Sn-Ag over Nickel Plating 8： Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag over Ni Plating Ｃ Ｄ （Dia. of Screw head） Contact A B 44.00 36.00 C D E 57RE-40140- □ 30B-(D7 □ )-FA 14 57RE-40240- □ 30B（D7 □ )-FA 24 54.78 46.78 36.23 23.749 46.08 57RE-40360- □ 30B （D7 □ )-FA 36 67.74 59.74 49.05 36.703 59.04 57RE-40500- □ 30B （D7 □ )-FA 50 82.85 74.85 64.22 51.816 74.15 n/2 1 n +1 25.36 12.954 35.30 ※ Panel mounting cut-out dimensions, PCB mounting dimensions : Type 2 0.5 2.159 Contact No. 3.20 Number of Part Number 2.159 4.2 12.0 15.1 15.68 Number of Contact：14, 24, 36, 50 Ｄ ※ The connector as above drawing is assembled panel maounting screws. (Refer to page 5.) ○ Panel Cut-out Dimensions & PCB Mounting Dimensions Type １ +0.2 0 Ｒ０． ５０(max.) 15.50 ※１ ※１ 15.50 Ｒ０． ５０(max.) +0.2 0 +0.2 0 B +0.2 0 B Type 2 １０ 2ーＲ２． ５０±０． １０ 2ー３． ２０±０． １０ 2ーＲ２． ５０±０． １０ 2ー３． ２０±０． Panel Cut-out Dimensions Panel Cut-out Dimensions Thickness １． ６０(max.) Thickness１． ６０(max.) (Front Mounting) (Front Mounting) B±0.1 B±0.1 +0.2 0 E ※１ ０５ 2ーＲ１． ６０±０． 15.50 +0.2 0 Ｒ０． ５０(max.) 15.50 ※１ +0.2 0 Ｒ０． ５０(max.) +0.2 0 ０５ 2ーＲ１． ６０±０． Thickness 1． ６０(max.) Panel Cut-out Dimensions (Rear Mounting) (Rear Mounting) １０ 2ーφ３． ２０±０． ｎ−φ0.80±0.10 １０ 2ーφ３． ２０±０． B±0.10 4.29±0.10 （2.145） B±0.10 ｎ−φ0.80±0.10 2.159±0.08 2.159±0.08 PCB Mounting Dimensions Thickness１． ６０±0.19 PCB Mounting Dimensions Thickness 1． ６０±0.19 ※１：When the mating connector is 57F or 57FE series, +0.2 0 2-∅5.5 Land D±0.10 D±0.10 the size ※1 is 16.20 Thickness １． ６０(max.) ※１：When the mating connector is 57F or 57FE series +0.2 the size ※1 is 16.20 0 . . ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 4.29±0.10 Panel Cut-out Dimensions （2.145） E