U15 SERIES DC/DC MODULES Applications • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The U15 Family of high efficiency DC/DC converters offer power levels of up to 15 Watt. With ultra-wide input voltage range and single and multi-outputs, these converters provide versatility without sacrificing the board space. All models feature an input Pi filter and continuous short circuit protection. The fully enclosed, encapsulated construction achieves very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. SPECIFICATIONS Specifications & Features Summary Input Specifications Input Voltage Range • 500Vdc minimum, 10MΩ input-to-output isolation • No airflow or heatsink required • Enclosed six-sided metal shield construction for low EMI/RFI • Efficiency to 82% • 4:1 Input Range • Pi Input Filter • Continuous Short Circuit Protection Approval Pending • Remote On/Off Control • Delivers up to 15W in 2”x2” package with Industry-Standard Pinouts Model Num U15-12S5 U15-12S12 U15-12S15 U15-12D5 U15-12D12 U15-12D15 U15-12T5-12 U15-12T5-15 U15-12S3.3 U15-48S5 U15-48S12 U15-48S15 U15-48D5 U15-48D12 U15-48D15 U15-48T5-12 U15-48T5-15 U15-48S3.3 VIn 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC VOut 5.0 VDC 12.0 VDC 15.0 VDC ±5.0 VDC ±12.0 VDC ±15.0 VDC ±12.0/5.0 VDC ±15.0/5.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±5.0 VDC ±12.0 VDC ±15.0 VDC ±12.0/5.0 VDC ±15.0/5.0 VDC 3.3 VDC IOut 3.0A 1.25A 1.0A ±1.5A ±0.625A ±0.5A ±0.31A/1.5A ±0.25A/1.5A 3.0A 3.0A 1.25A 1.0A ±1.5A ±0.625A ±0.5A ±0.31A/1.5A ±0.25A/1.5A 3.0A INo Load 15.0 mA 15.0 mA 15.0 mA 20.0 mA 20.0 mA 20.0 mA 20.0 mA 20.0 mA 15.0 mA 10.0 mA 10.0 mA 10.0 mA 15.0 mA 15.0 mA 15.0 mA 15.0 mA 15.0 mA 10.0 mA 12V----------9-36V 48V--------18-72V Pi Type Input Filter Output Specifications Voltage Accuracy Single Output IFull Load 810.0 mA 780.0 mA 780.0 mA 810.0 mA 780.0 mA 780.0 mA 780.0 mA 780.0 mA 545.0 mA 410.0 mA 390.0 mA 390.0 mA 400.0 mA 380.0 mA 380.0 mA 380.0 mA 380.0 mA 270.0 mA Eff 77% 80% 80% 77% 80% 80% 80% 80% 76% 77% 80% 80% 79% 82% 82% 82% 82% 76% +/-1.0% max. Dual +Output -Output Triple, 5V 12V / 15V Voltage Balance(Dual) Transient Response: Single, 25% Step Load Change Dual,FL-1/2L +/- 1% Error Band External Trim Adj. Range Ripple and Noise, 20MHz BW Case W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 W2530 The output voltage can be trimmed (±10%) using an external resistor. To trim the output up (down) connect a resistor between pins 5 and 6 (7). A 10KΩ trim pot can also be used to make the output variable. Connect the wiper to pin 5 and make the other connections to pins 6 and 7. Consult factory for hundreds of other input / output voltage configurations Black Coated Copper w/Non-Conductive Base 0.30 [7.62] 0.10 [2.54] 0.80 [20.32] 6 2 2.00 [50.80] Measured From High Line to Low Line Measured From Full Load to 1/4 Load CMOS or Open Collector TTL >+5.5Vdc or Open Circuit <1.8Vdc 10mA 100K ohms (Ein 0 Vdc to 9 Vdc) Referenced to Input Minus 5 1.80 [45.72] 0.20 [5.08] 2.00 [50.80] 0.20 [5.08] Logic Compatibility EC-On EC-Off Shutdown Idle Current Input Resistance Control Common 0.40 [10.16] 1 1. 2. REMOTE ON/OFF CONTROL 7 3 0.40 [10.16] Up to 82% 500 VDC min 109 ohms 300KHz, min Connected to Output Common -25oC to +71oC 100oC max. Free-Air Convection -55oC to +105oC Six Sided Continuous Shield 2X2X0.4 Inches (50.8X50.8X10.2mm) 8 0.40 [10.16] 0.60 [15.24] +/-0.02% / oC Continuous +/-0.2% max. +/-1.0% max. +/-1.0% max. +/-5.0% max. Case Material Notes: 4 <500u sec. <500u sec. +/-10% 10mV RMS. Max. 75mV p-p max. Temperature Coefficient Short Circuit Protection Line Regulation, Single/Dual Triple Load Regulation, Single/Dual Triple General Specifications Efficiency Isolation Voltage Isolation Resistance Switching Frequency Case Grounding Operating Temperature Range Case Temperature Cooling Storage Temperature Range EMI / RFI Dimensions Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. BOTTOM VIEW U15 FAMILY +/-1.0% max. +/-3.0% max. +/-2.0% max. +/-3.0% max. +/-1.0% max. SIDE VIEW 0.40 [10.2] All dimensions are in inches [mm]. All pins are dia. 0.040 [1.02] Tolerances: .XX= ±0.04, .XXX= ±0.010 Pin # 1 2 3 4 5 6 7 8 S(ingle) On/Off No Pin Vin Vin + Trim Vout Vout + No Pin D(ual) On/Off No Pin Vin Vin + Trim Vout Common Vout + T(riple) On/Off No Pin Vin Vin + - Aux. Out Common +5Vout + Aux. Out Triple Output Loading Table (1) Amperes Voltage Min. (2) Nom. +12(15) or -12(15) 0.10 0.31(0.25) +5 +12(15) or -12(15) 0.25 0.10 1.5 0.31(0.25) Maximum total power from all outputs is limited to 15 watts, but no output should be allowed to exceed its maximum current. Minimum current on each output is required to maintain specified regulation. • • Intronics Power Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: 1-781-551-5500 Fax: 1-781-551-5555 Rev. B