LUMINIS PR1602

Ceiling pendant with clear acrylic prismatic diffuser or semi specular
anodized aluminum reflector. An array of optional attachments and
accessories are available to customize, and adapt each luminaire to
particular design scheme and lighting concept.
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process.
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
2
3
4
1- Heavy duty hang straight swivel, with 4 1/2” dia. (115)
canopy and universal mounting plate.
2- 5/8” Dia.(16) X36” lg. (900) suspension stem.
Precut factory stems are available on request
(Specify option STM with desired length).
(Options STM60 & STM80 for longer stems.)
3- Cast aluminum removable top cover for quick maintenance.
4- Extruded aluminum ballast housing module with
a fine linear stria pattern.
5- PR1601: Clear acrylic prismatic diffuser.
PR1602: Semi specular anodized aluminum reflector.
Alternate reflector finish (Options RP6)
5
PR1602
Option CK16
Ceiling surface
conversion
Semi specular aluminum
reflector. All other parts of
luminaire are painted as per
specified color.
PR1601
36”
(900)
Photometry
Separate updated technical specification
sheets with related models and light
sources with I.E.S formatted photometry
are available on www.luminis.com.
2”
(50)
PR1601
PR1602
60
30
(445)
16” (406)
* C.F.L. with EM42 option
Height 19 1/2” (495)
Certification
Option CK16
Ceiling surface
conversion
Max. watts:
C.F.L: 2x70w
H.I.D: 100w
Max. weight: 15 lbs.(6.9)
Installation: Mounts over a standard 4”(100)
octagonal box with 3 1/2” (89) c/c mounting holes.
Light source selection
CF (Gx24q)
Single lamp Two lamps
F142
F157
F170
F185
2G8-1
Base
PR1601
MH (ED17)
M70
M100
M150
F232
F242
F257
F270
Finish
Voltage
120 V Standard
factory
Four lamps prewired
(If no voltage is
specified)
F426
For other voltages,
F432
please specify with
F442
catalog number.
INC. (A21)
A150
M175 * * M175 Includes
L16 full clear lens
enclosure for
enclosed rated
lamps.
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
Optional colors
CS: Custom color
RAL: RAL# color
H.I.D. (ED17)
120 V
277 V
347 V
COMP. FLUO.
SPW:
W16:
D16:
L16:
LB16:
BA16:
BC16:
GL16:
RP6 :
DM1:
DM2:
DM3:
DS1:
DS2:
EM42:
Refer to pages
(Lamps: By others)
16 .17 . 18 for details
on listed options.
(Open rated lamps only.
Except for 175MH)
Luminaires may be altered for design improvements or discontinued without prior notice.
QRS:
QS:
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page
8
Mounting
Surface ceiling mount
Safety cable.
60”lg. (1525) Stem.
80”lg. (2030) Stem.
Cut to size stem.
36” lg. stem with 45º
hang straight swivel.
3/4” NPT stem adaptor.
Black spiral power cord.
White spiral power cord.
3/18 black straight power
cord with aircraft cable.
3/18 white straight power
cord with aircraft cable.
Accessories
Frosted prismatic diffuser.
Clear prismatic conical lens.
Clear flat bottom lens.
Cross blades louver.
Satin anodized band.
Colored alum. band same as
luminaire.
Zinc plated concentric rings
guard.
Inside reflector semi-specular.
Outside reflector same as
luminaire
Electrical
Dimming & dual switch options:
Please refer to page 16
DM4:
Smart ballast
120/277
347 V (To specify)
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
CK16:
STC:
STM60:
STM80:
STM:
SW45:
TA:
TCB:
TCW:
SPB:
Mounting.
UL. Indoor use.
(CE certification on request)
Options
90
* 17 1/2”
PR1602
PR1601 . PR1602
Specification
1
Model#
PRISMA 16
Ceiling mount
L U M IN IS
1x26w / 1x32w / 1x42w
120V Dimming ballast.
2x26W 120V Dimming ballast.
2x32w / 2x42w
1X57 / 1X70W
120V Dimming ballast.
2x57W/70W 120V Dimming
ballast
Dual switch 1 lamp.
Dual switch 2 lamps.
1 lamp (26/32/42W) Integral
emergency battery back up.
Quartz restrike standby relay.
Quartz lamp socket
for external emergency power.
Web: www.luminis.com.
Sept. 2006
Rev.Feb.2007
L U M IN I S
OPTIONS
Electrical controls
Emergency battery back-up
EM42
One lamp:
EM242
HOT
BLK
WHT
Two lamp:
26w: 450 Lmns.. 26w / 32w
32w: 575 Lmns.
750 Lmns.
42w: 750 Lmns.
Time: 90 Mnts -120/277V / T 0º C
EM Ballast wiring
diagram for 120V
factory connection.
Note:
*Unless otherwise specified, test switch and indicator
light are installed with luminaires at all times.
* Standard factory prewiring for
Unswitched luminaire.
AC ballast
WHT
If remote test switch
is required, please
add -S to option
EM
ballast
Black/120V (Factory wired)
Orange/277V
(Cap unused lead.)
COM
Single pole test switch (Breaking the connection)
Optional:
luminaire wired for
* EM42S Switched
external wall switch control.
* EM242S To be specified if required.
Electronic dimming ballast
Dimming specification
For 57w & 70w:
(Remote installation only) Consult factory
Specifying option
120V
277V
Note: Overall luminaire height will increase by 2” (50)
to accommodate battery back-up
Quartz lamp restrike
Option: QRS
Quartz restrike standby lamp kit.
When power failure is restored, it
will energize temporary Quartz
lamp with progressive dimming
until full H.I.D light output is
produced.
max.100w DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Pulse start ballast
Quartz lamp emergency socket
Option: QS
Luminaires ballasts
are wired for external
switching control.
Note: Add suffix PS to selected lamp wattage.
Use of pulse start lamp and ballast combination
requires a lens enclosure with the luminaire. Please
check with compatible luminaire lens option.
Quartz lamp socket for external
120V emergency power input.
Separate 120V dedicated wiring is
included.
max.100 W DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Dual switching
DS1
+
-
+
Note: Some pulse start lamps may be available as
protected lamp version to eliminate the lens
enclosure. If required, please contact factory to
verify availability and compatibility.
DS2
+
+
+
-
DS1-26:
DS2-26:
DS1-42:
DS2-42:
DS1-70:
DS2-70:
DS1-120:
DS2-120:
DS2-642:
DS2-842:
DS2-657:
+
+
+
DS1: Luminaires with
2 lamps individually
externally controlled.
DS2: Luminaires with
4 lamps or more are
externally controlled
by set of 2 lamps.(for
other lamp groupings,
please consult factory)
N0. of lamps
DM1-120
DM1-277
1X26/32/42W
DM2-120
DM2-277
2X26W
2DM2-120
2DM2-277
4X26W
DM3-120
DM3-277
2X32/42W
DM3-120
DM3-277
1X57/70W
DM4-120
DM4-277
2X57/70W
2DM3-120
2DM3-277
4X32/42W
3DM3-120
3DM3-277
6X32/42W
DM5-120
DM5-277
4X57/70W
Standard dimming ballast
MARK X 60HZ / EOL protection
Dimming;5-100% Min. start. temp. 10ºC (50ºF)
Burn lamps 100 hrs at full light output before dimming.
DS2: Luminaire ballast housing length
and stem size may be increased to
accomodate required number of ballasts.
Dual single lamp switching 26W
Dual lamp switching by pair 2x26W
Dual single lamp switching 32W or 42W
Dual lamp switching by pair 2x32W or 2X42W
Dual single lamp switching 57W or 70W
Dual lamp switching by pair 2x57W or 2X70W
Dual single lamp switching 85W or 120W
Dual lamp switching by pair 2x85W or 2x120W
Dual lamp switching by pair 2x32W or 2X42W
Dual lamp switching by pair 2x32W or 2X42W
Dual lamp switching by pair 2x57W or 2X70W
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page
16
Web: www.luminis.com.
Sept. 2006 Rev.Feb.2007
ng
L U M IN I S
Slope ceiling adaptor
er to page 16
w/1x42w
g ballast.
w
W
g ballast.
/42W)
gency
up.
e
.
socket
ower.
AR115
AR117-AR119
AR121 only.
45º hang straight ball swivel
for 5/8” dia. suspension stem.
with adaptor plate for AR115
AR117 - AR119 - AR121 series
SB45
Suspension power cord
Stems can be cut on site
and re-threaded externally
(Tap size 1/4-18)
3/18 X 36”lg. power cord with
adjustable aircraft cable.
SPB Black power cable only
with options
EM42 / EM42S
EM242 / EM242S
QS / DS/ DS2
For other factory cut to size length add
suffix -STM with desired length to
catalog# max.120”
3/18 Spiral power cord Max. 277V
Standard extended length: 3ft.
Not applicable when using options
EM42 / EM42S
EM242 / EM242S
QS / DS/ DS2
Ceiling surface mounting. Ceiling surface mount conversion kit.
Mounts with a Standard 4” octagonal
electrical box.(by others)
Option: STC
Option:
Safety aircraft suspension cable,
for applications with earthquake
regulations.
Cables extends 18” beyond
canopy.
(Secured to building structure)
Conduit adaptor
Luminous blue edge lens
Option:
15” Dia. Kronos replacement
LBL
frosted lens with luminous blue
clear edging.
Frosted
Cross guard ring
Clear lens (Prisma Nova 12)
L12:
Clear lens (Prisma 12)
L16:
Clear lens (Prisma 16)
L17:
Clear lens (Prisma Nova 16)
L21:
Clear lens (Prisma Nova 24)
L22:
Clear lens (Prisma 24)
Max. watts:
C.F.L: 2x42w
H.I.D: 100w
CK16
Max. watts:
C.F.L: 2x70w
H.I.D: 100w
3/4” NPT Female
Threaded adaptor
(Electrical conduit and other support
hardware by others)
TA
Frosted acrylic full lens enclosure.
(Kronos KR series)
L11:
CK12
Option:
Option:
Clear or
Frosted
STM80
Option: TCW (White)
TCB (Black)
Safety suspension cable
L18F:
STM60
*STA36: 36” lg.X5/8” O.D.
suspension stem.
*STA60: 60” lg.X5/8” O.D.
suspension stem.
*STA80: 80” lg. X5/8” O.D.
suspension stem.
Spiral suspension power cord
Option: SPW (White)
SPB (Black)
Note: cable
size and type
may change at
factory
discretion upon
availability, to
accomodate
required wiring.
Optional lens:
Option
* STA option for:
Option: SB45
sion
swivel.
with 45º
swivel.
al
Longer suspension stem
Option: SW45
45º hang straight ball swivel
for 5/8” dia. suspension stem.
SW45
OPTIONS
Mounting and accessories
Option:
CLA: Satin anodized.
Clear
3/16” thick aluminum cross guard ring.
Available with Kronos series only.
Cross blade louver
Optional damp location
conversion kit:
DA:
2” Deep aluminum satin anodized
cross blade louver.
Option:
LB12: Satin anodized 12”
LB16: Satin anodized 16”
LB22: Satin anodized 21”
Damp location
converter glass cover
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page
17
Web: www.luminis.com.
Sept. 2006
Rev.Feb.2007
L U M IN I S
Wire Guard
Clear prismatic conical drop lens
Option:
D12: Clear lens (Prisma 12)
D16: Clear lens (Prisma 16)
D22: Clear lens (Prisma 22)
D12T: Clear lens (Prisma Nova 12)
D16T: Clear lens (Prisma Nova 16)
D22T: Clear lens (Prisma Nova 22)
Option:
GL16 Prisma 16 series
GL22 Prisma 22 series
Galvanized wire guard with
concentric rings
Diffuser trim
Option:
Alternate inner diffuser
Aluminum diffuser trim 12” x 3 1/2” high
BA12 Satin anodized aluminum trim.
BC12 Painted aluminum trim same
color as luminaire.
Alternate inner diffuser for
PR1630 series.
Option:
CR12:
12” dia. inner vibrant red diffuser.
Aluminum diffuser trim 16” x 5 1/2” high
BA16 Satin anodized aluminum trim.
BC16 Painted aluminum trim.
CY12:
12” dia. vibrant yellow inner diffuser.
Aluminum diffuser trim 21” x 61/2” high
BA22 Satin anodized aluminum trim.
BC22 Painted aluminum trim.
Reflector finish
OPTIONS
Mounting and accessories
Alternate Up light reflector finish
(Aramis AR101 series)
RD1:
Option:
Inside reflector: Semi-specular
Outside reflector: Same color as luminaire
RP2
RP6
RP8
RP9
RD1
White enamel indirect
reflector.
All other visible metal parts
as per specified color.
Prisma 12 & Prisma Nova 12
Prisma 16 & Prisma Nova 16
Prisma 22 & Prisma Nova 22
Kronos & Torx
Non compatible options
Frosted prismatic diffuser
- (DS1/DS2) Dual switching with (DM) Dimming ballast
- (DS1/DS2) Dual switching with (EM) Emergency battery
- (DM) Dimming ballast (EM) Emergency battery
- QS or QRS option with compact fluo. lamps.
Option:
W12
Frosted 12” dia. prismatic lens diffuser.
W16
Frosted 16” dia. prismatic lens diffuser .
W22
Frosted 21” dia. prismatic lens diffuser .
Lamps & ballast compatibility
Lamp
Watts
Lamp
base
26W
G24Xq3 120/277
39W
T6
32W
G24Xq3 120/277
39W
PAR20 Open rated (Med.base)
42W
G24Xq4 120/277
50W
ED17
Open rated (Med.base)
M110/M148
57W
G24Xq5 120/277
70W
PAR30L Open rated (Med.base)
M198/M143
70W
G24Xq6 120/277
70W
ED17
Open rated (Med.base)
M198/M143
85W
2G8-1
70W
T6
Enclosed rated (G12 base) M139
100W
ED17
Open rated (Med.base)
M90/M140
150W
ED17
Open rated (Med.base)
M102/M142
175W
ED17
Enclosed rated (Med.base) M57
250W
ED28
Open rated (Mog.base)
M58
400W
ED37
Open rated (Mog.base)
M59
Ballast Volts
120
120W 2G8-1
120
Note:
Requires lens
Enclosed rated lamps require a lens
enclosure option
protection with the luminaire.
Enclosed rated lamps will not fit with open
rated sockets.
Lamp
watts
Lamp base & Type
ANSI
Code
Enclosed rated (G12 base)M130
M130
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page
18
Web: www.luminis.com.
Sept. 2006
Rev. July 2007