INTERCONNECTS Series 800, 801 .100” Grid (.030” dia.) Low Profile Headers & Versatile Sockets 802, 803 Single and Double Row • Series 800 and 802 single and double row pin headers use MM #5016 pins. See page 182 for details. • Series 801 and 803 single and double row sockets use MM #1303 pins. See page 150 for details. • Series 801 and 803 receptacles use Hi-Rel, 6-finger BeCu #47 contacts rated at 4.5 amps. Receptacles accept .025” diameter and .025” square pins. See page 221 for details. • Insulators are high temp. thermoplastic. Fig. 1 RoHS 2002/95/EC Ordering Information Single Row Low Profile Pin Header 800-XX-0_ _-10-002000 Fig. 1 Specify # of pins Fig. 2 Double Row 01-64 Low Profile Pin Header 802-XX-0 _ _-10-002000 Fig. 2 Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 For RoHS compliance select plating code. XX=Plating Code See Below SPECIFY PLATING CODE XX= Fig. 3 02-64 10 10μ” Au Pin Plating Single Row 90 40 200μ” Sn/Pb 200μ” Sn Low Profile Socket (short insulator) 801-XX-0 _ _-10-002000 Fig. 3 Specify # of pins Single Row Fig. 4 01-64 Low Profile Socket (long insulator) 801-XX-0 _ _-10-012000 Specify # of pins Fig. 4 Fig. 5 01-36 Double Row Low Profile Socket 803-XX-0 _ _-10-002000 Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 SPECIFY PLATING CODE XX= Fig. 5 w w w. m i l l - m a x . c o m For RoHS compliance select plating code. XX=Plating Code See Below 13 Sleeve (Pin) 10µ” Au Contact (Clip) 30µ” Au 80 02-72 91 93 41 99 43 44 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn 516-922-6000