OTS-1SD2DA1DTR Optiva Standard, 1 SDI 270 Mbps, ™ 2 Stereo AES/EBU Digital Audio and 1 Duplex RS-232/422/485 Data SDI Video, Audio and Serial Data Transmission Video The OTS-1SD2DA1DTR provides for the digital transmission of 1 Channel of uncompressed SDI Video, 2 Channels of AES/EBU Audio and 1 Channel of duplex Serial Data, at absolute broadcast quality. Data All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. A L E R T S T A T U S System Design Audio 2 AES/EBU In 2 AES/EBU In 1 Serial Data In/Out SDI Video In A L E R T S T A T U S ST, LC, SC or FC SDI Video Out ST, LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1SDT2DAT1DTR 1 Serial Data Out/In Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. OTS-1SDR2DAR1DRT Features • Uncompressed SDI Video over one fiber • TDM - Single Wavelength • Complies with SMPTE 259 for uncompressed SDI • Compatible with MDM-7000 Series for WDM and CWDM multiplexing Optiva™ Upgrade Path • No EMI or RFI and no ground loops This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). • Stand alone or rack-mount • Ideal for Broadcast/Studio and Professional AV applications The Optiva™ bandwidth requirement of this system is 346 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-1SDT2DAT1DTR-A2/A3M-XX-IC OTS-1SDT2DAT1DTR-A2/A3-XX-IC OTS-1SDT2DAT1DTR-A2/A3D-XX-IC OTS-1SDT2DAT1DTR-A2/A3H-XX-IC OTS-1SDT2DAT1DTR-L4/L4-XX-IC OTS-1SDR2DAR1DRT-A3M/A2-XX-IC OTS-1SDR2DAR1DRT-A3/A2-XX-IC OTS-1SDR2DAR1DRT-A3D/A2-XX-IC OTS-1SDR2DAR1DRT-A3H/A2-XX-IC OTS-1SDR2DAR1DRT-L4/L4-XX-IC Non-Optical Version OTS-1SDT2DAT1DTR-NOC-IC OTS-1SDR2DAR1DRT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological test code Bit rate Bit error rate Connector Audio Digital Format Connector Optiva™ Configurable SMPTE 259 RP-178 270 Mbps 10-14 BNC (IEC 60169-8) Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data AES/EBU AES3-1992 (ANSI S4,40) SMPTE 276M Micro DB25 RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring CATV/RF & L-Band Micro DB25 DC to 1 Mbps Optical Switching, Routing & Redundancy DC to 1 Mbps Passive Multiplexing Solutions DC to 1 Mbps Enclosures, Racks & Frames Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms (Audio <10ms) 11 oz Power Supplies & Accessories LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA Sample Configuration